Determination of quasiinstant mechanical characteristics of polymers by equations of state

1996 ◽  
Vol 31 (4) ◽  
pp. 535-538
Author(s):  
O. F. Shlenskii ◽  
N. N. Lyasnikova
Keyword(s):  
Mechanical Characteristics ◽  
Equations Of State

Technique and results of experimental determination of the compressibility factor of the natural gas

2021 ◽  
pp. 35-40
Author(s):  
Denis Y. Kutovoy ◽  
Igor A. Yatsenko ◽  
Vladimir B. Yavkin ◽  
Aydar N. Mukhametov ◽  
Petr V. Lovtsov ◽  
...  
Keyword(s):  
Natural Gas ◽  
Equations Of State ◽  
Compressibility Factor ◽  
High Accuracy ◽  
State Equations ◽  
Actual Problem ◽  
Temperature Range ◽  
Relative Value ◽  
Compressibility Coefficient

The actual problem of the possibility of using the equations of state for the gas phase of natural gas at temperatures below 250 K is considered. To solve it, the compressibility coefficients of natural gas obtained experimentally with high accuracy are required. The technique was developed and experimental study was carried out of compressibility factor aiming expanding temperature range of the state equations GERG-2004 and AGA8-DC92. The proposed technique is based on the fact that to assess the applicability of the equation of state, it is sufficient to obtain the relative value of the compressibility coefficient and not to determine its absolute value. The technique does not require complex equipment and provides high accuracy. The technique was tested on nitrogen, argon, air and methane. Uncertainty of determination of the compressibility factor is not greater than 0.1 %. For two different compositions of natural gas, obtained experimental data were demonstrated that the equations of state GERG-2004 and AGA8-92DC provide uncertainty of the calculation of the compressibility coefficient within 0.1 % in the temperature range from 220 K to 250 K and pressure below 5 MPa.

Combined determination of the mechanical characteristics of polymer films

1968 ◽  
Vol 1 (5) ◽  
pp. 84-87
Author(s):  
O. F. Shlenskii ◽  
N. N. Khovanskaya ◽  
V. V. Lavrent'ev
Keyword(s):  
Polymer Films ◽  
Mechanical Characteristics

scholarly journals Effect of type cement on the mechanical strength of copper slag mortars

2013 ◽  
Vol 66 (1) ◽  
pp. 85-90 ◽  
Author(s):  
Amin Nazer ◽  
Osvaldo Pavez ◽  
Ithamar Toledo
Keyword(s):  
Environmental Impact ◽  
Flexural Strength ◽  
Construction Industry ◽  
Mechanical Characteristics ◽  
Copper Slag ◽  
Cement Mortars ◽  
Alternative Material ◽  
Binder Type ◽  
Initial Resistance

Copper slag is a massive metallurgist waste. Annual production rises up to 24.6 million tons, approximately, and the main environmental impact derived from slag disposal is the usage of great soil extensions and the resulting visual contamination of the landscape. Along time, copper slag has been used in the manufacture of concrete and cement mortars. Thus, with the aim of verifying binder-type influence in the final hardness of mortars, two types of cement were used: regular cement and high initial resistance cement. Copper slag was characterized from the chemical, mineralogical and grading viewpoints. Official Chilean regulations were used in the applied methodology for the determination of some important slag parameters. Compression and flexural strength trials were carried out on cement mortars in specialized laboratories. The obtained results showed that mortars manufactured with copper slag presented a better resistance to compression and flexural strength than mortars manufactured with normal sand, and those made with high initial resistance cement were even better. It can be concluded from this work that copper slag offers optimal mechanical characteristics to be used in the manufacturing of cement mortars, becoming a sustainable and adequate alternative material for usage in the construction industry.

scholarly journals Measurement Uncertainties Encountered During Gas Turbine Driven Compressor Field Testing

1998 ◽  
Author(s):  
Klaus Brun ◽  
Rainer Kurz
Keyword(s):  
Measurement Uncertainty ◽  
Gas Turbine ◽  
Field Test ◽  
Equations Of State ◽  
Accurate Determination ◽  
Field Testing ◽  
Significant Implication ◽  
Test Results ◽  
Measurement Uncertainties

Field testing of gas turbine compressor packages requires the accurate determination of efficiency, capacity, head, power and fuel flow in sometimes less than ideal working environments. Nonetheless, field test results have significant implication for the compressor and gas turbine manufacturers and their customers. Economic considerations demand that the performance and efficiency of an installation are verified to assure a project’s return on investment. Thus, for the compressor and gas turbine manufacturers, as well as for the end-user, an accurate determination of the field performance is of vital interest. This paper describes an analytic method to predict the measurement uncertainty and, thus, the accuracy, of field test results for gas turbine driven compressors. Namely, a method is presented which can be employed to verify the validity of field test performance results. The equations governing the compressor and gas turbine performance uncertainties are rigorously derived and results are numerically compared to actual field test data. Typical field test measurement uncertainties are presented for different sets of instrumentation. Test parameters that correlate to the most significant influence on the performance uncertainties are identified and suggestions are provided on how to minimize their measurement errors. The effect of different equations of state on the calculated performance is also discussed. Results show that compressor efficiency uncertainties can be unacceptably high when some basic rules for accurate testing are violated. However, by following some simple measurement rules and maintaining commonality of the gas equations of state, the overall compressor package performance measurement uncertainty can be limited and meaningful results can be achieved.

Study on the Effects of Heat Treatments on the Physical and Mechanical Characteristics of 1.4301 Stainless Steel

2021 ◽  
Vol 42 ◽  
pp. 57-62
Author(s):  
Maria Stoicănescu
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Mechanical Characteristics ◽  
Austenitic Stainless Steels ◽  
Heat Treatments ◽  
Hot Plastic Deformation ◽  
Improved Characteristics ◽  
Physical And Mechanical Characteristics

The 1.4301 stainless steel is part of the category of austenitic stainless steels, steels which do no undergo heat treatments in general, as they are intended for hot plastic deformation in particular. The aim of the research presented in this paper was to obtain significantly improved characteristics of the resistance properties in relation to the values obtained under classical conditions, by applying heat treatments. Samples taken from the delivery state material underwent annealing, quenching and ageing heat treatments. Subsequently, the samples thus treated were subjected to tests enabling the determination of the correlations between the heat treatment parameters, the structure and the properties.

Sign in / Sign up

Export Citation Format

Share Document