Discontinuous precipitation of M23C6 in austenitic steels

1971 ◽  
Vol 6 (3) ◽  
pp. 208-212 ◽  
Author(s):  
M. Hillert ◽  
R. Lagneborg
Keyword(s):  
Discontinuous Precipitation ◽  
Austenitic Steels

High-resolution observations of metastable γ’ precipitation in Al-15at.%Ag

1996 ◽  
Vol 54 ◽  
pp. 1004-1005
Author(s):  
N. V. Larcher ◽  
I. G. Solorzano
Keyword(s):  
Discontinuous Precipitation ◽  
Equilibrium Phase ◽  
Quantitative Description ◽  
Present Contribution ◽  
Α Phase ◽  
The Matrix ◽  
Aging Sequence ◽  
Matrix Precipitation ◽  
Considerable Detail ◽  
Kinetics Of

It is currently well established that, for an Al-Ag alloy quenched from the α phase and aged within the metastable solvus, the aging sequence is: supersaturated α → GP zones → γ’ → γ (Ag2Al). While GP zones and plate-shaped γ’ are metastable phases, continuously distributed in the matrix, formation of the equilibrium phase γ takes place at grain boundaries by discontinuous precipitation (DP). The crystal structure of both γ’ and γ is hep with the following orientation relationship with respect to the fee α matrix: {0001}γ′,γ // {111}α, <1120>γ′,γ, // <110>α.The mechanisms and kinetics of continuous matrix precipitation (CMP) in dilute Al-Ag alloys have been studied in considerable detail. The quantitative description of DP kinetics, however, has received less attention. The present contribution reports the microstructural evolution resulting from aging an Al-Ag alloy with Ag content higher than those previously reported in the literature, focusing the observations of γ' plate-shaped metastable precipitates.

Descaling of austenitic steels by laser radiation

1994 ◽  
Author(s):  
H. Schlüter ◽  
A. Zwick ◽  
M. Aden ◽  
G. Uhlig ◽  
K. Wissenbach ◽  
...  
Keyword(s):  
Laser Radiation ◽  
Austenitic Steels

Activity of Nitrogen in Austenitic Steels

1975 ◽  
Vol 61 (13) ◽  
pp. 2892-2903 ◽  
Author(s):  
Makoto KIKUCHI ◽  
Ryohei TANAKA
Keyword(s):  
Austenitic Steels

NIROSTA 4305

Alloy Digest ◽  
2002 ◽  
Vol 51 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tungsten Carbide ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Austenitic Steels ◽  
High Sulfur Content ◽  
Machined Parts

Abstract NIROSTA 4305 is an austenitic alloy with a high sulfur content. The alloy is typically used for machined parts. As with other austenitic steels, it is necessary to machine with good-quality high-speed steel or tungsten carbide tools. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-854. Producer or source: ThyssenKrupp Nirosta GmbH.

ALLEGHENY LUDLUM TYPE 205

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Austenitic Steels

Abstract Allegheny Stainless Type 205 is a chromium-manganese nitrogen austenitic high strength stainless steel that maintains its low magnetic permeability even after large amounts of cold working. Annealed Type 205 has higher mechanical properties than any of the conventional austenitic steels-and for any given strength level, the ductility of Type 205 is comparable to that of Type 301. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-640. Producer or source: Allegheny Ludlum Corporation. Originally published March 1996, revised October 1997.

Researching nitrogen solubility in nitrogen-containing austenitic steels at melting and recrystallization by CALPHAD method

2019 ◽  
pp. 53-66 ◽  
Author(s):  
L. A. Smirnov ◽  
I. I. Gorbachev ◽  
V. V. Popov ◽  
A. Yu. Pasynkov ◽  
A. S. Oryshchenko ◽  
...  
Keyword(s):  
Global Minimum ◽  
Nitrogen Solubility ◽  
Thermodynamic Description ◽  
Solidus Temperature ◽  
Liquidus Line ◽  
Calphad Method ◽  
Austenitic Steels ◽  
Nitrogen Transfer ◽  
Fixed Nitrogen ◽  
System Phase

The CALPHAD method has been employed to compose thermodynamic description of the Fe–Cr–Mn–Ni–Si–C–N system. Using an algorithm based on finding a global minimum of Gibbs energy, the calculations of system phase composition were performed in the temperature range from 1750°C to hardening and in the range of compositions corresponding to 04Kh20N6G11M2AFB steel. Calculations showed that at temperatures above liquidus line, Cr and Mn increase nitrogen solubility in the melt, while Ni and Si reduce it. With an increase in the content of Cr, Mn, Ni, and Si in steel in the studied composition range, both liquidus and solidus temperature decrease. The degree of influence on these temperatures of Cr, Mn, Ni and Si within the steel grade is different and ranges from ~3 to ~14°C. Calculations taking into account the possibility of nitrogen transfer between steel and the atmosphere of air showed that the amount of fixed nitrogen in the alloy under study varies, depending on the composition of the steel and temperature, from ~0.3 to ~0.6 wt%. As the temperature decreases from liquidus to solidus, the amount of fixed nitrogen increases, with the exception of those steel compositions when ferrite and not austenite is released from the liquid phase.

Sign in / Sign up

Export Citation Format

Share Document