The thermal and thermo-oxidative stability of the polyethylene terephthalate fibre yambolene

1973 ◽  
Vol 4 (5) ◽  
pp. 489-491 ◽  
Author(s):  
S. Voinova ◽  
D. Dimitrov ◽  
A. Angelova ◽  
V. Micheva ◽  
A. Petkov
Keyword(s):  
Oxidative Stability ◽  
Polyethylene Terephthalate ◽  
Polyethylene Terephthalate Fibre

scholarly journals Cracking Propagation and Pattern Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam

2015 ◽  
Vol 773-774 ◽  
pp. 911-915 ◽  
Author(s):  
J.M. Irwan ◽  
R.M. Asyraf ◽  
N. Othman ◽  
H.B. Koh ◽  
A.K. Aeslina ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Polyethylene Terephthalate ◽  
Concrete Beam ◽  
Volume Fraction ◽  
Reinforced Concrete Beam ◽  
Rc Beam ◽  
Materials Properties ◽  
Tensile Strength Test ◽  
Structural Test ◽  
Polyethylene Terephthalate Fibre

This paper reports the results on cracking propagation and pattern of reinforced concrete (RC) beam conducted using irregular-shaped Polyethylene Terephthalate (IPET) as a fibre. Three volume fraction of IPET fibre is used namely, 0.5%, 1% and 1.5%. All RC beam specimens are tested under four point loading under flexural capacity behaviour. Prior to structural test, the materials properties which include the compressive and tensile strength test and modulus of elasticity test were determined. The results than are compared with control RC beam. It is found that the RC beam with IPET fibre does not significantly change the behaviour of failure mode, cracking propagation and pattern compared to control RC beam.

scholarly journals Reinforcement of Asphalt Concrete Mixture using Recycle Polyethylene Terephthalate Fibre

2016 ◽  
Vol 9 (46) ◽  
Author(s):  
Nura Usman ◽  
Mohd Idrus Bin Mohd Masirin ◽  
Kabiru Abdullahi Ahmad ◽  
Anwaruddin Ahmed Wurochekke
Keyword(s):  
Polyethylene Terephthalate ◽  
Asphalt Concrete ◽  
Concrete Mixture ◽  
Polyethylene Terephthalate Fibre

Deflection Behaviour of Irregular-Shaped Polyethylene Terephthalate Fibre Reinforced Concrete Beam

2014 ◽  
Vol 911 ◽  
pp. 438-442 ◽  
Author(s):  
J.M. Irwan ◽  
R.M. Asyraf ◽  
N. Othman ◽  
H.B. Koh ◽  
A.K. Aeslina ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Polyethylene Terephthalate ◽  
Concrete Beam ◽  
Volume Fraction ◽  
Reinforced Concrete Beam ◽  
Rc Beam ◽  
Fibre Reinforced Concrete ◽  
Rc Beams ◽  
Polyethylene Terephthalate Fibre ◽  
Stage Yield

This paper reports the results on deflection behaviour of reinforced concrete (RC) beam conducted using irregular-shaped Polyethylene Terephthalate (IPET) as a fibre. Three volume fraction of IPET fibre is used namely, 0.5%, 1% and 1.5%. All RC beam specimens are tested under four point loading under flexural capacity behaviour. The results for deflection behaviour namely cracking stage, yield stage and ultimate stage and ductility are reported. The results than are compared with control RC beam. It is found that the addition of IPET fibre improves the first crack and ultimate strength as well as ductility of RC beams proportional to the increment of volume fraction of IPET fibre. Therefore, based on the results reported, the addition of IPET fibre significantly increases the deflection behaviour of RC beam.

Treatment of polyethylene terephthalate in a He glow discharge

2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-357-Pr3-362 ◽  
Author(s):  
D. D. Papakonstantinou ◽  
D. Mataras ◽  
Arefi-Khonsari
Keyword(s):  
Glow Discharge ◽  
Polyethylene Terephthalate
Sign in / Sign up

Export Citation Format

Share Document