The structural characteristics of hot-stretched Capron cord investigated by polarization-optical methods

1975 ◽  
Vol 6 (4) ◽  
pp. 425-428
Author(s):  
E. S. Alekseeva ◽  
Z. V. Vetoshkina ◽  
V. A. Berestnev ◽  
R. V. Uzina
Keyword(s):  
Structural Characteristics ◽  
Optical Methods ◽  
Capron Cord

scholarly journals Performance of Four Optical Methods in Estimating Leaf Area Index at Elementary Sampling Unit of Larix principis-rupprechtii Forests

Forests ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 30 ◽  
Author(s):  
Jie Zou ◽  
Yong Zuo ◽  
Peihong Zhong ◽  
Wei Hou ◽  
Peng Leng ◽  
...  
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Global Climate ◽  
Structural Characteristics ◽  
Correction Method ◽  
Optical Methods ◽  
Sampling Unit ◽  
Observation System ◽  
Area Index ◽  
Inversion Model

Optical methods are frequently used as a routine method to obtain the elementary sampling unit (ESU) leaf area index (LAI) of forests. However, few studies have attempted to evaluate whether the ESU LAI obtained from optical methods matches the accuracy required by the LAI map product validation community. In this study, four commonly used optical methods, including digital hemispherical photography (DHP), digital cover photography (DCP), tracing radiation of canopy and architecture (TRAC) and multispectral canopy imager (MCI), were adopted to estimate the ESU (25 m × 25 m) LAI of five Larix principis-rupprechtii forests with contrasting structural characteristics. The impacts of three factors, namely, inversion model, canopy element or woody components clumping index ( Ω e or Ω w ) algorithm, and the woody components correction method, on the ESU LAI estimation of the four optical methods were analyzed. Then, the LAI derived from the four optical methods was evaluated using the LAI obtained from litter collection measurements. Results show that the performance of the four optical methods in estimating the ESU LAI of the five forests was largely affected by the three factors. The accuracy of the LAI obtained from the DHP and MCI strongly relied on the inversion model, the Ω e or Ω w algorithm, and the woody components correction method adopted in the estimation. Then the best Ω e or Ω w algorithm, inversion model and woody components correction method to be used to obtain the ESU LAI of L. principis-rupprechtii forests with the smallest root mean square error (RMSE) and mean absolute error (MAE) were identified. Amongst the three typical woody components correction methods evaluated in this study, the woody-to-total area ratio obtained from the destructive measurements is the most effective method for DHP to derive the ESU LAI with the smallest RMSE and MAE. In contrast, using the woody area index obtained from the leaf-off DHP or DCP images as the woody components correction method would result in a large LAI underestimation. TRAC and MCI outperformed DHP and DCP in the ESU LAI estimation of the five forests, with the smallest RMSE and MAE. All the optical methods, except DCP, are qualified to obtain the ESU LAI of L. principis-rupprechtii forests with an MAE of <20% that is required by the global climate observation system. None of the optical methods, except TRAC, show the potential to obtain the ESU LAI of L. principis-rupprechtii forests with an MAE of <5%.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

SEM analysis of the change in the reaction rates with deposit structures in the copper-iron cementation system

1978 ◽  
Vol 36 (1) ◽  
pp. 456-457
Author(s):  
V. Annamalai ◽  
L.E. Murr
Keyword(s):  
Structural Characteristics ◽  
Secondary Electron Emission ◽  
Copper Deposit ◽  
Reaction Rates ◽  
Sem Analysis ◽  
Experimental Conditions ◽  
Major Drawback ◽  
Emission Mode ◽  
Scrap Iron ◽  
Image Position

Economical recovery of copper metal from leach liquors has been carried out by the simple process of cementing copper onto a suitable substrate metal, such as scrap-iron, since the 16th century. The process has, however, a major drawback of consuming more iron than stoichiometrically needed by the reaction.Therefore, many research groups started looking into the process more closely. Though it is accepted that the structural characteristics of the resultant copper deposit cause changes in reaction rates for various experimental conditions, not many systems have been systematically investigated. This paper examines the deposit structures and the kinetic data, and explains the correlations between them.A simple cementation cell along with rotating discs of pure iron (99.9%) were employed in this study to obtain the kinetic results The resultant copper deposits were studied in a Hitachi Perkin-Elmer HHS-2R scanning electron microscope operated at 25kV in the secondary electron emission mode.

Use of 2½ D imaging in analysis of NiTi martensite

1978 ◽  
Vol 36 (1) ◽  
pp. 610-611
Author(s):  
G. M. Michal
Keyword(s):  
Memory Effect ◽  
Monoclinic Phase ◽  
Reaction Path ◽  
Structural Characteristics ◽  
Salient Feature ◽  
Martensite Phase ◽  
Orientation Relationships ◽  
Low Symmetry ◽  
Hydride Phases ◽  
Unusual Shape

Several TEM investigations have attempted to correlate the structural characteristics to the unusual shape memory effect in NiTi, the consensus being the essence of the memory effect is ostensible manifest in the structure of NiTi transforming martensitic- ally from a B2 ordered lattice to a low temperature monoclinic phase. Commensurate with the low symmetry of the martensite phase, many variants may form from the B2 lattice explaining the very complex transformed microstructure. The microstructure may also be complicated by the enhanced formation of oxide or hydride phases and precipitation of intermetallic compounds by electron beam exposure. Variants are typically found in selfaccommodation groups with members of a group internally twinned and the twins themselves are often observed to be internally twinned. Often the most salient feature of a group of variants is their close clustering around a given orientation. Analysis of such orientation relationships may be a key to determining the nature of the reaction path that gives the transformation its apparently perfect reversibility.

Preparation and characterisation of vanadium pentoxide supported rhodium catalyst

1988 ◽  
Vol 46 ◽  
pp. 946-947
Author(s):  
A. Legrouri
Keyword(s):  
Aqueous Solution ◽  
Thermal Decomposition ◽  
Physicochemical Properties ◽  
Surface Area ◽  
Vanadium Pentoxide ◽  
High Purity ◽  
Gas Adsorption ◽  
Rhodium Catalyst ◽  
Optical Methods ◽  
Reducible Oxides

The industrial importance of metal catalysts supported on reducible oxides has stimulated considerable interest during the last few years. This presentation reports on the study of the physicochemical properties of metallic rhodium supported on vanadium pentoxide (Rh/V2O5). Electron optical methods, in conjunction with other techniques, were used to characterise the catalyst before its use in the hydrogenolysis of butane; a reaction for which Rh metal is known to be among the most active catalysts.V2O5 powder was prepared by thermal decomposition of high purity ammonium metavanadate in air at 400 °C for 2 hours. Previous studies of the microstructure of this compound, by HREM, SEM and gas adsorption, showed it to be non— porous with a very low surface area of 6m2/g3. The metal loading of the catalyst used was lwt%Rh on V2Q5. It was prepared by wet impregnating the support with an aqueous solution of RhCI3.3H2O.

Use of light microscopy in the qualitative and quantitative study of liquid crystalline order

1992 ◽  
Vol 50 (1) ◽  
pp. 264-265
Author(s):  
Christopher Viney
Keyword(s):  
Light Microscopy ◽  
Liquid Crystalline ◽  
Structural Characteristics ◽  
Molecular Order ◽  
Liquid Crystalline Phases ◽  
Convenient Technique ◽  
Liquid Crystalline Materials ◽  
Transparent Windows

Light microscopy is a convenient technique for characterizing molecular order in fluid liquid crystalline materials. Microstructures can usually be observed under the actual conditions that promote the formation of liquid crystalline phases, whether or not a solvent is required, and at temperatures that can range from the boiling point of nitrogen to 600°C. It is relatively easy to produce specimens that are sufficiently thin and flat, simply by confining a droplet between glass cover slides. Specimens do not need to be conducting, and they do not have to be maintained in a vacuum. Drybox or other controlled environmental conditions can be maintained in a sealed chamber equipped with transparent windows; some heating/ freezing stages can be used for this purpose. It is relatively easy to construct a modified stage so that the generation and relaxation of global molecular order can be observed while specimens are being sheared, simulating flow conditions that exist during processing. Also, light only rarely affects the chemical composition or molecular weight distribution of the sample. Because little or no processing is required after collecting the sample, one can be confident that biologically derived materials will reveal many of their in vivo structural characteristics, even though microscopy is performed in vitro.

Investigation of cluster layers of small netal particles by TEM, SEM, EELS and by photoacoustic spectroscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 250-251
Author(s):  
H. Seiler ◽  
U. Haas ◽  
K.H. Körtje
Keyword(s):  
Bulk Material ◽  
High Vacuum ◽  
Optical Methods ◽  
Metal Particles ◽  
Silver Particles ◽  
Low Loss ◽  
Plasmon Excitation ◽  
First Results ◽  
Diffraction Patterns ◽  
Small Metal Particles

The physical properties of small metal particles reveal an intermediate position between atomic and bulk material. Especially Ag has shown pronounced size effects. We compared silver layers evaporated in high vacuum with cluster layers of small silver particles, evaporated in N2 at a pressure of about 102 Pa. The investigations were performed by electron optical methods (TEM, SEM, EELS) and by Photoacoustic (PA) Spectroscopy (gas-microphone detection).The observation of cluster layers with TEM and high resolution SEM show small silver particles with diameters of about 50 nm (Fig. 1 and Figure 2, respectively). The electron diffraction patterns of homogeneous Ag layers and of cluster layers are similar, whereas the low loss EELS spectra due to plasmon excitation are quite different. Fig. 3 and Figure 4 show first results of EELS spectra of a cluster layer of small silver particles on carbon foil and of a homogeneous Ag layer, respectively.

Ascidian Mitochondrial tRNAMet Possessing Unique Structural Characteristics

1998 ◽  
Vol 17 (1) ◽  
pp. 531-539 ◽  
Author(s):  
Akiko Kondow ◽  
Shin-ichi Yokobori ◽  
Takuya Ueda ◽  
Kimitsuna Watanabe
Keyword(s):  
Structural Characteristics
Sign in / Sign up

Export Citation Format

Share Document