Molecular orientation and deformation rate as factors in the strength of Kapron yarn

1980 ◽  
Vol 11 (3) ◽  
pp. 211-214
Author(s):  
M. P. Nosov ◽  
V. A. Smirnova
Keyword(s):  
Deformation Rate ◽  
Molecular Orientation

Shear-Induced Molecular Orientation and Crystallization in Isotactic Polypropylene: Effects of the Deformation Rate and Strain

2005 ◽  
Vol 38 (4) ◽  
pp. 1244-1255 ◽  
Author(s):  
Rajesh H. Somani ◽  
Ling Yang ◽  
Benjamin S. Hsiao ◽  
Thomas Sun ◽  
Natalia V. Pogodina ◽  
...  
Keyword(s):  
Isotactic Polypropylene ◽  
Deformation Rate ◽  
Molecular Orientation

Polarized microbeam FT-IR analysis of single fibers

1996 ◽  
Vol 54 ◽  
pp. 206-207
Author(s):  
Liling Cho ◽  
David L. Wetzel
Keyword(s):  
Molecular Orientation ◽  
Transition Point ◽  
Polymer Fibers ◽  
Single Fiber ◽  
Wire Grid ◽  
Polyester Fibers ◽  
Ft Ir ◽  
Ir Analysis ◽  
The Relationship ◽  
Wire Grid Polarizer

Polarized infrared microscopy has been used for forensic purposes to differentiate among polymer fibers. Dichroism can be used to compare and discriminate between different polyester fibers, including those composed of polyethylene terephthalate that are frequently encountered during criminal casework. In the fiber manufacturering process, fibers are drawn to develop molecular orientation and crystallinity. Macromolecular chains are oriented with respect to the long axis of the fiber. It is desirable to determine the relationship between the molecular orientation and stretching properties. This is particularly useful on a single fiber basis. Polarized spectroscopic differences observed from a single fiber are proposed to reveal the extent of molecular orientation within that single fiber. In the work presented, we compared the dichroic ratio between unstretched and stretched polyester fibers, and the transition point between the two forms of the same fiber. These techniques were applied to different polyester fibers. A fiber stretching device was fabricated for use on the instrument (IRμs, Spectra-Tech) stage. Tension was applied with a micrometer screw until a “neck” was produced in the stretched fiber. Spectra were obtained from an area of 24×48 μm. A wire-grid polarizer was used between the source and the sample.

Observing the relaxation of molecular orientation in sheared liquid crystalline polymer solutions

1990 ◽  
Vol 48 (4) ◽  
pp. 1092-1093
Author(s):  
Wendy Putnam ◽  
Christopher Viney
Keyword(s):  
Molecular Orientation ◽  
Liquid Crystalline Polymer ◽  
Liquid Crystalline ◽  
Crystalline Polymer ◽  
Polymer Processing ◽  
Molecular Alignment ◽  
Global Alignment ◽  
Shear Direction ◽  
Axial Strength ◽  
Strength And Stiffness

Liquid crystalline polymers (solutions or melts) can be spun into fibers and films that have a higher axial strength and stiffness than conventionally processed polymers. These superior properties are due to the spontaneous molecular extension and alignment that is characteristic of liquid crystalline phases. Much of the effort in processing conventional polymers goes into extending and aligning the chains, while, in liquid crystalline polymer processing, the primary microstructural rearrangement involves converting local molecular alignment into global molecular alignment. Unfortunately, the global alignment introduced by processing relaxes quickly upon cessation of shear, and the molecular orientation develops a periodic misalignment relative to the shear direction. The axial strength and stiffness are reduced by this relaxation.Clearly there is a need to solidify the liquid crystalline state (i.e. remove heat or solvent) before significant relaxation occurs. Several researchers have observed this relaxation, mainly in solutions of hydroxypropyl cellulose (HPC) because they are lyotropic under ambient conditions.

Effect of deformation rate on the stress-strain curves of gelatin gels

1996 ◽  
Vol 93 ◽  
pp. 837-849 ◽  
Author(s):  
A Bot ◽  
IA van Amerongen ◽  
RD Groot ◽  
NL Hoekstra ◽  
WGM Agterof
Keyword(s):  
Deformation Rate ◽  
Stress Strain ◽  
Gelatin Gels

Molecular orientation of liquid aliphatic hydrocarbons on the surface and at the interface with water

1989 ◽  
Vol 54 (12) ◽  
pp. 3171-3186 ◽  
Author(s):  
Jan Kloubek
Keyword(s):  
Free Energy ◽  
Surface Free Energy ◽  
Molecular Orientation ◽  
Phase Changes ◽  
Aliphatic Hydrocarbons ◽  
Water Molecules ◽  
Free Energies ◽  
Dispersion Component ◽  
System Water ◽  
Orientation Of Molecules

The validity of the Fowkes theory for the interaction of dispersion forces at interfaces was inspected for the system water-aliphatic hydrocarbons with 5 to 16 C atoms. The obtained results lead to the conclusion that the hydrocarbon molecules cannot lie in a parallel position or be randomly arranged on the surface but that orientation of molecules increases there the ration of CH3 to CH2 groups with respect to that in the bulk. This ratio is changed at the interface with water so that the surface free energy of the hydrocarbon, γH, rises to a higher value, γ’H, which is effective in the interaction with water molecules. Not only the orientation of molecules depends on the adjoining phase and on the temperature but also the density of hydrocarbons on the surface of the liquid phase changes. It is lower than in the bulk and at the interface with water. Moreover, the volume occupied by the CH3 group increases on the surface more than that of the CH2 group. The dispersion component of the surface free energy of water, γdW = 19.09 mJ/m2, the non-dispersion component, γnW = 53.66 mJ/m2, and the surface free energies of the CH2 and CH3 groups, γ(CH2) = 32.94 mJ/m2 and γ(CH3) = 15.87 mJ/m2, were determined at 20 °C. The dependence of these values on the temperature in the range 15-40 °C was also evaluated.

Influence of metal phthalocyanine molecular orientation on charge separation at organic donor/acceptor interface

2021 ◽  
Author(s):  
Heeseon Lim ◽  
Sena Yang ◽  
Sang-Hoon Lee ◽  
Jung-Yong Lee ◽  
Yeunhee Lee ◽  
...  
Keyword(s):  
Solar Cell ◽  
Charge Separation ◽  
Molecular Orientation ◽  
Organic Solar Cell ◽  
Metal Phthalocyanine ◽  
Dipole Orientation ◽  
Highly Efficient ◽  
Donor Acceptor

To achieve a highly efficient organic solar cell (OPVs), control of molecular orientation is one of prime important factors, for interfacial dipole orientation and energy offset at donor/acceptor (D/A) interface...

Sign in / Sign up

Export Citation Format

Share Document