Effect of internal stresses on the structure and physical and mechanical properties of a complex glass fibre

1994 ◽  
Vol 26 (1) ◽  
pp. 53-56
Author(s):  
V. I. Kiselev
Keyword(s):  
Mechanical Properties ◽  
Glass Fibre ◽  
Physical And Mechanical Properties ◽  
Internal Stresses

Sandwich Composites of Glass Fibre Panel and Polyurethane/Coconut Coir Foam Core (GFRP - PUC)

2011 ◽  
Vol 471-472 ◽  
pp. 391-396 ◽  
Author(s):  
M.A. Azmi ◽  
Hasan Zuhudi Abdullah ◽  
Maizlinda Izwana Idris
Keyword(s):  
Mechanical Properties ◽  
Polyurethane Foam ◽  
Glass Fibre ◽  
Adhesive Bonding ◽  
Physical And Mechanical Properties ◽  
Sandwich Composite ◽  
Sandwich Composites ◽  
Flexural Testing ◽  
Glass Fibre Reinforced ◽  
Coconut Coir

In this work, sandwich composite properties were investigated by addition of coconut coir (CC). Fibres in the polyurethane foam cores ranges from 0 to 20 wt.%. Glass fibre reinforced epoxy panels were used as a skin and polyurethane foam as a core, these materials adhesively bonded to keep the whole structure attached with each other. Sandwich composite skins and core-skin bonding were attained via adhesive bonding technique. While polyurethane foam reinforced by coconut coir fibres were manufactured by using one shot process and polyurethane moulding method. Sandwich composite panels with different coir fibres compositions were subjected to the density test, weight per area test and flexural testing in order to investigate their physical and mechanical properties. From the experimental results and analysis, it was found that the sandwich composites with 10 wt.% of coir fibres offer higher mechanical properties.

scholarly journals Stress - Strain Analysis and Deformation Behavior of Fiber Reinforced Styrene - Ethylene - Butylene - Styrene Polymer Hybrid Nano Composites

2019 ◽  
Vol 16 (1) ◽  
pp. 62-69
Author(s):  
SUBRAMANIAN RAVICHANDRAN ◽  
E. VENGATESAN ◽  
A. RAMAKRISHNAN
Keyword(s):  
Mechanical Properties ◽  
Metal Oxides ◽  
Glass Fibre ◽  
Strain Analysis ◽  
Physical And Mechanical Properties ◽  
Breaking Load ◽  
Compression Moulding ◽  
Stress Strain ◽  
Polymer Hybrid ◽  
Glass Fibre Reinforced

Composite materials are replacing traditional materials, because of their superior physical and mechanical properties. The main objective of the present work is to perform stress-strain analysis on Styrene-Ethylene-Butylene-Styrene (SEBS)-epoxy resin composites under reinforcement of fibres and dispersion of CuO, ZnO, MgO, SiO and TiO2nano metal oxides. Combination of glass fibre with particle reinforcement (GFRPs) applications has increased in recent days. In this study, glass fibre reinforced epoxy composites with different nano metal oxides are developed by compression moulding method and their mechanical properties such as breaking load, elastic limit, plastic range and fracture point are evaluated. The results indicate that the incorporation of nanophase material with glass fibre can improve the properties of composites.

scholarly journals Theoretical and experimental study of the effect of wollastonite on the physical and mechanical properties of concrete

2021 ◽  
Vol 2094 (2) ◽  
pp. 022077
Author(s):  
S S Dobrosmyslov ◽  
A S Voronin ◽  
Y V Fadeev ◽  
I G Endzhievskaya ◽  
S V Khartov
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Specific Volume ◽  
Mechanical Characteristics ◽  
Bending Strength ◽  
Theoretical Study ◽  
Chemical Interaction ◽  
Physical And Mechanical Properties ◽  
Internal Stresses ◽  
Physical And Mechanical Characteristics

Abstract As part of the work, an experimental and theoretical study of the effect of adding wollastonite on the physical and mechanical characteristics of concrete was carried out. The internal stress was calculated according to Hooke’s law. The change in the specific volume was determined from the change in the volume of the hydrated phase. The calculation of the chemical interaction was carried out within the framework of thermodynamic equilibrium. According to the results of the work, it was shown that the addition of wollastonite leads to a linear decrease in the value of internal stresses, which is consistent with experimental results on the increase in compressive and bending strength.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

Sign in / Sign up

Export Citation Format

Share Document