Transmission electron microscopy on nickel oxide single crystals deformed at room temperature

1982 ◽  
Vol 17 (8) ◽  
pp. 2384-2390 ◽  
Author(s):  
S. Maruyama ◽  
A. Gervais ◽  
J. Philibert
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Nickel Oxide ◽  
Single Crystals ◽  
Room Temperature ◽  
Transmission Electron

The Charge State of Iron Ions Implanted Into Sapphire

1988 ◽  
Vol 100 ◽  
Author(s):  
C. J. Mchargue ◽  
P. S. Sklad ◽  
C. W. White ◽  
G. C. Farlow ◽  
A. Perez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystals ◽  
Charge State ◽  
Room Temperature ◽  
Local Environment ◽  
Rutherford Backscattering ◽  
Iron Ions ◽  
Valence States ◽  
Transmission Electron

ABSTRACTSingle crystals of α-Al2O3 were implanted with 57Fe+ at room temperature to fluences ranging from 1016 to 1017 ions/cm2. The damage in the implanted zone and the valence states and local environment of implanted ions were studied by transmission electron microscopy, Rutherford backscattering-channelling, and conversion electron Mössbauer spectroscopy. The implanted iron was distributed among the three charge states Fe2+, Fe3+, and Fe°(metallic clusters) with the relative amount of each varying with concentration of implanted iron.

A Weak-Beam Study of the Microstructure of β-CUZN Deformed in the Domain of Flow Stress Anomaly

1988 ◽  
Vol 133 ◽  
Author(s):  
G. Dirras ◽  
P. Beauchamp ◽  
P. Veyssière
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Flow Stress ◽  
Single Crystals ◽  
Room Temperature ◽  
Burgers Vector ◽  
Weak Beam ◽  
Transmission Electron ◽  
Edge Component ◽  
Imaging Conditions

ABSTRACTβ-brass single crystals oriented along <001> were deformed between room temperature and 300°C. The deformation microstructure and dissociation properties were studied by transmission electron microscopy under weak-beam imaging conditions.Whatever the deformation temperature, superdislocations with <111> Burgers vector and strong edge component dominate within the microstructure. In addition, below the temperature of the flow stress peak (≈ 250°C), the density of screw relative to mixed superdislocations decreases as straining temperature increases. Dissociation does not always occur on the slip plane neither does it proceed exclusively by glide, even in samples deformed at 100°C.

Scanning and Transmission Electron Microscopy of Human Red Blood Cells

1969 ◽  
Vol 27 ◽  
pp. 44-45
Author(s):  
A.J. Tousimis ◽  
T.R. Padden
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Blood Cells ◽  
Room Temperature ◽  
Type Specimen ◽  
New Combination ◽  
Human Red Blood Cells ◽  
Transmission Electron ◽  
Microscope Slides ◽  
Scanning Electron

The size, shape and surface morphology of human erythrocytes (RBC) were examined by scanning electron microscopy (SEM), of the fixed material directly and by transmission electron microscopy (TEM) of surface replicas to compare the relative merits of these two observational procedures for this type specimen.A sample of human blood was fixed in glutaraldehyde and washed in distilled water by centrifugation. The washed RBC's were spread on freshly cleaved mica and on aluminum coated microscope slides and then air dried at room temperature. The SEM specimens were rotary coated with 150Å of 60:40- gold:palladium alloy in a vacuum evaporator using a new combination spinning and tilting device. The TEM specimens were preshadowed with platinum and then rotary coated with carbon in the same device. After stripping the RBC-Pt-C composite film, the RBC's were dissolved in 2.5N HNO3 followed by 0.2N NaOH leaving the preshadowed surface replicas showing positive topography.

Formation of Dislocation Channels in Neutron Irradiated Molybdenum

1972 ◽  
Vol 30 ◽  
pp. 672-673
Author(s):  
S. Mahajan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ambient Temperature ◽  
Room Temperature ◽  
Channel Formation ◽  
Early Stages ◽  
Transmission Electron ◽  
Three Stages ◽  
Two Stages ◽  
Polycrystalline Molybdenum

The evolution of dislocation channels in irradiated metals during deformation can be envisaged to occur in three stages: (i) formation of embryonic cluster free regions, (ii) growth of these regions into microscopically observable channels and (iii) termination of their growth due to the accumulation of dislocation damage. The first two stages are particularly intriguing, and we have attempted to follow the early stages of channel formation in polycrystalline molybdenum, irradiated to 5×1019 n. cm−2 (E > 1 Mev) at the reactor ambient temperature (∼ 60°C), using transmission electron microscopy. The irradiated samples were strained, at room temperature, up to the macroscopic yield point.Figure 1 illustrates the early stages of channel formation. The observations suggest that the cluster free regions, such as A, B and C, form in isolated packets, which could subsequently link-up to evolve a channel.

Transmission Electron Microscopy study of Bi-based superconducting phases

1990 ◽  
Vol 48 (4) ◽  
pp. 50-51
Author(s):  
J.G. Wen ◽  
K.K. Fung
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Single Crystals ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Space Groups ◽  
Superconducting Phases ◽  
Ceramic Samples ◽  
Transmission Electron ◽  
Modulated Structures

Bi-based superconducting phases have been found to be members of a structural series represented by Bi2Sr2Can−1Cun−1On+4, n=1,2,3, and are referred to as 2201, 2212, 2223 phases. All these phases are incommensurate modulated structures. The super space groups are P2/b, NBbmb 2201, 2212 phases respectively. Pb-doped ceramic samples and single crystals and Y-doped single crystals have been studied by transmission electron microscopy.Modulated structures of all Bi-based superconducting phases are in b-c plane, therefore, it is the best way to determine modulated structure and c parameter in diffraction pattern. FIG. 1,2,3 show diffraction patterns of three kinds of modulations in Pb-doped ceramic samples. Energy dispersive X-ray analysis (EDAX) confirms the presence of Pb in the three modulated structures. Parameters c are 3 0.06, 38.29, 30.24Å, ie 2212, 2223, 2212 phases for FIG. 1,2,3 respectively. Their average space groups are all Bbmb.

A crystallographic analysis of the CoSi/Si(111) interface using Transmission Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 574-575
Author(s):  
A.C. Daykin ◽  
C.J. Kiely ◽  
R.C. Pond ◽  
J.L. Batstone
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Defect Structure ◽  
Room Temperature ◽  
Theoretical Method ◽  
Crystallographic Analysis ◽  
Si Substrate ◽  
Transmission Electron ◽  
Theoretical Predictions

When CoSi2 is grown onto a Si(111) surface it can form in two distinct orientations. A-type CoSi2 has the same orientation as the Si substrate and B-type is rotated by 180° degrees about the [111] surface normal.One method of producing epitaxial CoSi2 is to deposit Co at room temperature and anneal to 650°C.If greater than 10Å of Co is deposited then both A and B-type CoSi2 form via a number of intermediate silicides .The literature suggests that the co-existence of A and B-type CoSi2 is in some way linked to these intermediate silicides analogous to the NiSi2/Si(111) system. The phase which forms prior to complete CoSi2 formation is CoSi. This paper is a crystallographic analysis of the CoSi2/Si(l11) bicrystal using a theoretical method developed by Pond. Transmission electron microscopy (TEM) has been used to verify the theoretical predictions and to characterise the defect structure at the interface.

Sign in / Sign up

Export Citation Format

Share Document