N-dealkylation of 2-(tert-butyl)-3-hydroxy-3-(4-chlorophenyl)isoindolinone and n-(tert-alkyl)-2-aroylbenzamides in concentrated sulfuric acid

1977 ◽  
Vol 13 (6) ◽  
pp. 618-620
Author(s):  
G. A. Karlivan ◽  
R. �. Valter ◽  
V. P. Tsiekure
Author(s):  
E. M. Yarkina ◽  
E. A. Kurganova ◽  
A. S. Frolov ◽  
G. N. Koshel ◽  
T. N. Nesterova ◽  
...  

Objectives. This study describes a new approach to obtain para-tert-butylcumene by alkylation of cumene with isobutylene in the presence of catalysts, such as Amberlyst 36 Dry, KU-2-8, aluminum chloride, and tert-butyl alcohol and concentrated sulfuric acid.Methods. To determine the qualitative and quantitative composition of the compounds and reaction masses, the following analysis methods were used: gas–liquid chromatography (on the Kristall 2000M hardware-software complex), chromatomass spectrometry on an Agilent 6850 instrument equipped with an Agilent 19091S-433E capillary column (30 m × 250 μm × 0.25 μm), and nuclear magnetic resonance spectroscopy (on a Bruker DRX 400 instrument with an operating frequency of 400 MHz).Results. A significant quantity of meta-tert-butylcumene was obtained by the alkylation of cumene with isobutylene using several catalysts, along with para-tert-butylcumene. This study also showed that the use of the catalysts Amberlyst 36 Dry and KU-2-8 during alkylation in a closed system (autoclave) led to the formation of isobutylene oligomers, often in quantity greater than the target reaction product. Simultaneously, the alkylation of cumene with tert-butyl alcohol in the presence of concentrated sulfuric acid enabled the obtainment of only one isomer, para-tertbutylcumene, which is essential for the further production of high-purity para-tert-butyl phenol.Conclusions. Sulfuric acid alkylation of cumene with tert-butyl alcohol enabled the obtainment of an individual para-isomer of tert-butylcumene with a yield of 87–89% for the loaded tert-butyl-alcohol with a cumene conversion of ~30%.


2018 ◽  
Author(s):  
Harold Jeffrey M. Consigo ◽  
Ricardo S. Calanog ◽  
Melissa O. Caseria

Abstract Gallium Arsenide (GaAs) integrated circuits have become popular these days with superior speed/power products that permit the development of systems that otherwise would have made it impossible or impractical to construct using silicon semiconductors. However, failure analysis remains to be very challenging as GaAs material is easily dissolved when it is reacted with fuming nitric acid used during standard decapsulation process. By utilizing enhanced chemical decapsulation technique with mixture of fuming nitric acid and concentrated sulfuric acid at a low temperature backed with statistical analysis, successful plastic package decapsulation happens to be reproducible mainly for die level failure analysis purposes. The paper aims to develop a chemical decapsulation process with optimum parameters needed to successfully decapsulate plastic molded GaAs integrated circuits for die level failure analysis.


2020 ◽  
Vol 3 (441) ◽  
pp. 104-109
Author(s):  
N.A. Bektenov ◽  
◽  
N.C. Murzakassymova ◽  
M.A. Gavrilenko ◽  
А.N. Nurlybayeva ◽  
...  

1985 ◽  
Vol 50 (8) ◽  
pp. 1714-1726 ◽  
Author(s):  
Václav Dědek ◽  
Igor Linhart ◽  
Milan Kováč

Sodium alkoxide-catalyzed addition of methanol, ethanol and propanol to 3-chlorononafluoro-1,5-hexadiene (I) proceeds at temperatures -35 °C to 8 °C with allyl rearrangement, affording 1,6-dialkoxy-1,1,2,3,4,4,5,6,6-octafluoro-2,4-hexadiene (V) as the principal product, along with 1,6-dialkoxy-1,2,3,3,4,5,6,6-octafluoro-1,5-diene (VI) and trans-1,6-dialkoxy-1,1,2,3,4,4,5,6,6-nonafluoro-2-hexene (VII). The ethers Va-Vc consist of the cis,trans- and trans,trans-isomers in about 3 : 1 ratio, whereas the ethers VIa-VIc have trans,trans-configuration. Ethers Vc and VIc react with concentrated sulfuric acid to give dipropyl 2,3,4,5-tetrafluoro-2,4-hexadienedioate (IX) and dipropyl 2,3,4,4,5-pentafluoro-2-hexenedioate (X), respectively, whereas the ether VIIc affords a mixture of propyl 6-propyloxy-2,3,4,4,5,6-heptafluoro-2-hexenoate (XI) and ester X. Addition of methanol to perfluoro-1,3,5-hexatriene (II) affords 1,1,2,3,4,5,6,6-octafluoro-1,6-dimethoxy-3-hexene (XIII) as the principal product.


Molbank ◽  
10.3390/m1190 ◽  
2021 ◽  
Vol 2021 (1) ◽  
pp. M1190
Author(s):  
Andreas S. Kalogirou ◽  
Panayiotis A. Koutentis

Reaction of 4,5,6-trichloropyrimidine-2-carbonitrile (1) with concentrated sulfuric acid at ca. 20 °C gave 4,5,6-trichloropyrimidine-2-carboxamide (5) in 91% yield. The new compound was fully characterized by IR, MALDI-TOF, NMR and elemental analysis.


1995 ◽  
Vol 5 (2) ◽  
pp. 65-66 ◽  
Author(s):  
Mikhail V. Gorelik ◽  
Vera I. Lomzakova ◽  
Elena A. Khamidova ◽  
Vitalii Ya. Shteiman ◽  
Marianna G. Kuznetsova ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document