On the timoshenko buckling load of thin walled cylindrical shells

1968 ◽  
Vol 19 (1) ◽  
pp. 459-464
Author(s):  
J. Genin
Keyword(s):  
Cylindrical Shells ◽  
Buckling Load ◽  
Thin Walled

scholarly journals Experimental Nondestructive Test for Estimation of Buckling Load on Unstiffened Cylindrical Shells Using Vibration Correlation Technique

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Kaspars Kalnins ◽  
Mariano A. Arbelo ◽  
Olgerts Ozolins ◽  
Eduards Skukis ◽  
Saullo G. P. Castro ◽  
...  
Keyword(s):  
Large Scale ◽  
Numerical Models ◽  
Cylindrical Shells ◽  
Laser Scanner ◽  
Experimental Tests ◽  
Buckling Load ◽  
Correlation Technique ◽  
Thin Walled Structures ◽  
Instability Point ◽  
Thin Walled

Nondestructive methods, to calculate the buckling load of imperfection sensitive thin-walled structures, such as large-scale aerospace structures, are one of the most important techniques for the evaluation of new structures and validation of numerical models. The vibration correlation technique (VCT) allows determining the buckling load for several types of structures without reaching the instability point, but this technique is still under development for thin-walled plates and shells. This paper presents and discusses an experimental verification of a novel approach using vibration correlation technique for the prediction of realistic buckling loads of unstiffened cylindrical shells loaded under axial compression. Four different test structures were manufactured and loaded up to buckling: two composite laminated cylindrical shells and two stainless steel cylinders. In order to characterize a relationship with the applied load, the first natural frequency of vibration and mode shape is measured during testing using a 3D laser scanner. The proposed vibration correlation technique allows one to predict the experimental buckling load with a very good approximation without actually reaching the instability point. Additional experimental tests and numerical models are currently under development to further validate the proposed approach for composite and metallic conical structures.

An Experiential Optimization Design Method for Orthogonal Rib-Stiffened Thin Walled Cylindrical Shells under Axial Loading

2011 ◽  
Vol 110-116 ◽  
pp. 1773-1783
Author(s):  
Jia Mao ◽  
Yu Feng Chen ◽  
Wei Hua Zhang
Keyword(s):  
Optimization Design ◽  
Design Method ◽  
Mass Parameter ◽  
Cylindrical Shells ◽  
Reference Value ◽  
Buckling Load ◽  
Element Analysis ◽  
Buckling Loads ◽  
Load Optimization ◽  
Thin Walled

Parametric structural FEA (Finite Element Analysis) models of the orthogonal rib-stiffened thin walled cylindrical shells are established using APDL (ANSYS Parametric Design Language). An experiential optimization design method is then developed based on conclusions of series numerical analysis investigating the effects of parameters’ modification upon buckling loads and modes of the structure. The effects of single design parameter modification under both variational and fixed volume (mass) constraints upon the buckling loads and modes indicate that, only one design scheme is able to obtain maximum buckling load when deployment of the strengthening ribs and volume (mass) parameter were settled previously, and minimum mass would be obtained while this maximum buckling load equals to the required design load. Optimization calculations for aluminum alloy material and layered C/E (Carbon/Epoxy) composite material shells with three layering styles are implemented and discussed, and some useful conclusions are obtained. Method and approach developed in this paper provide certain reference value for the optimal design of such structures.

scholarly journals Fracture Mechanical Analysis of Thin-Walled Cylindrical Shells with Cracks

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 592
Author(s):  
Feng Yue ◽  
Ziyan Wu
Keyword(s):  
Fracture Mechanics ◽  
Tensile Stress ◽  
Failure Modes ◽  
Cylindrical Shells ◽  
Crack Tip ◽  
Mechanical Analysis ◽  
J Integral ◽  
Thin Walled Structures ◽  
Circumferential Tensile Stress ◽  
Thin Walled

The fracture mechanical behaviour of thin-walled structures with cracks is highly significant for structural strength design, safety and reliability analysis, and defect evaluation. In this study, the effects of various factors on the fracture parameters, crack initiation angles and plastic zones of thin-walled cylindrical shells with cracks are investigated. First, based on the J-integral and displacement extrapolation methods, the stress intensity factors of thin-walled cylindrical shells with circumferential cracks and compound cracks are studied using linear elastic fracture mechanics, respectively. Second, based on the theory of maximum circumferential tensile stress of compound cracks, the number of singular elements at a crack tip is varied to determine the node of the element corresponding to the maximum circumferential tensile stress, and the initiation angle for a compound crack is predicted. Third, based on the J-integral theory, the size of the plastic zone and J-integral of a thin-walled cylindrical shell with a circumferential crack are analysed, using elastic-plastic fracture mechanics. The results show that the stress in front of a crack tip does not increase after reaching the yield strength and enters the stage of plastic development, and the predicted initiation angle of an oblique crack mainly depends on its original inclination angle. The conclusions have theoretical and engineering significance for the selection of the fracture criteria and determination of the failure modes of thin-walled structures with cracks.

RELIABILITY ASSESSMENT OF AXIALLY COMPRESSED COMPOSITE CYLINDRICAL SHELLS WITH RANDOM IMPERFECTIONS

2011 ◽  
Vol 11 (02) ◽  
pp. 215-236 ◽  
Author(s):  
MATTEO BROGGI ◽  
ADRIANO CALVI ◽  
GERHART I. SCHUËLLER
Keyword(s):  
Mathematical Models ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Reliability Assessment ◽  
Buckling Analysis ◽  
Buckling Load ◽  
Experimental Results ◽  
Drastic Decrease ◽  
Different Types ◽  
Probability And Statistics

Cylindrical shells under axial compression are susceptible to buckling and hence require the development of enhanced underlying mathematical models in order to accurately predict the buckling load. Imperfections of the geometry of the cylinders may cause a drastic decrease of the buckling load and give rise to the need of advanced techniques in order to consider these imperfections in a buckling analysis. A deterministic buckling analysis is based on the use of the so-called knockdown factors, which specifies the reduction of the buckling load of the perfect shell in order to account for the inherent uncertainties in the geometry. In this paper, it is shown that these knockdown factors are overly conservative and that the fields of probability and statistics provide a mathematical vehicle for realistically modeling the imperfections. Furthermore, the influence of different types of imperfection on the buckling load are examined and validated with experimental results.

Dynamic Buckling of Externally Pressurized Imperfect Cylindrical Shells

1975 ◽  
Vol 42 (2) ◽  
pp. 316-320 ◽  
Author(s):  
D. Lockhart ◽  
J. C. Amazigo
Keyword(s):  
Asymptotic Expression ◽  
Cylindrical Shells ◽  
Simple Relation ◽  
Dynamic Buckling ◽  
Fourier Component ◽  
Buckling Load ◽  
Buckling Mode ◽  
Geometric Imperfections ◽  
Circular Cylindrical Shells ◽  
Step Loading

The dynamic buckling of imperfect finite circular cylindrical shells subjected to suddenly applied and subsequently maintained lateral or hydrostatic pressure is studied using a perturbation method. The geometric imperfections are assumed small but arbitrary. A simple asymptotic expression is obtained for the dynamic buckling load in terms of the amplitude of the Fourier component of the imperfection in the shape of the classical buckling mode. Consequently, for small imperfection, there is a simple relation between the dynamic buckling load under step-loading and the static buckling load. This relation is independent of the shape of the imperfection.

Buckling behaviors of thin-walled cylindrical shells under localized axial compression loads, Part 1: Experimental study

2021 ◽  
Vol 166 ◽  
pp. 108118
Author(s):  
Peng Jiao ◽  
Zhiping Chen ◽  
He Ma ◽  
Peng Ge ◽  
Yanan Gu ◽  
...  
Keyword(s):  
Experimental Study ◽  
Axial Compression ◽  
Cylindrical Shells ◽  
Thin Walled
Sign in / Sign up

Export Citation Format

Share Document