Orientation factors and orientation distribution function of anisotropic polymer glasses determined by X-ray scattering: A comparison of different evaluation methods

1990 ◽  
Vol 24 (2) ◽  
pp. 233-240 ◽  
Author(s):  
Gyula J. Vancso
2012 ◽  
Vol 7 (4) ◽  
pp. 107-116
Author(s):  
Sergey Bardakhanov ◽  
Ludmila Vikulina ◽  
Vladimir Lysenko ◽  
Andrey Nomoev ◽  
Sergey Poluyanov ◽  
...  

The possibility of application of small-angle X-ray scattering (SAXS) for nanopowders analysis was studied. The research for eight silica powders (including four powders obtained by the authors with help of electron accelerator) was conducted. The possibility of application of small angle X-ray scattering for determination of size distribution function of nanoparticles was shown


2018 ◽  
Vol 124 (5) ◽  
pp. 56001 ◽  
Author(s):  
Rodrigo U. Ichikawa ◽  
João P. R. L. L. Parra ◽  
Oriol Vallcorba ◽  
Inma Peral ◽  
Walter K. Yoshito ◽  
...  

2005 ◽  
Vol 495-497 ◽  
pp. 983-988
Author(s):  
N.Yu. Ermakova ◽  
Nikolay Y. Zolotorevsky ◽  
Yuri Titovets

The method is described which enables to determine the microtexture that is the orientation distribution within individual grains of a polycrystal. The microtexture is evaluated on the base of X-ray pole distributions measured for separate reflections, referred to as microscopic pole figures (MPF). The procedure for treatment of experimental MPF and the following computation of orientation distribution function is described in detail. Precision of the microtexture evaluation and possible ways of its improvement are discussed. As an example of the method application, orientation distribution within a single grain of aluminum polycrystal deformed by uniaxial compression up to 50% has been examined.


2006 ◽  
Vol 39 (4) ◽  
pp. 502-508 ◽  
Author(s):  
Peter R. Morris

The problem of obtaining the Voigt average for the elastic stiffnesses with texture-describing weight functions has been solved for triclinic crystal and physical symmetries. The average is obtained by expanding theTijklmnpq, which relate the elastic stiffnesses in the rotated reference frame, c^{\,\prime}_{ijkl}, to those of the principal elastic stiffnesses,cmnpq, in generalized spherical harmonics, multiplying by the orientation distribution function and integrating over all orientations. The condition imposed to assure a unique expansion results in the absence of terms with oddL, so that the results are completely determinable from conventional X-ray pole figures. This is the most general case, from which all higher-symmetry solutions may be obtained by application of symmetry operations. The Reuss average for elastic compliances may be obtained in a similar fashion.


Sign in / Sign up

Export Citation Format

Share Document