Cell wall fracture properties in relation to lignin distribution and cell dimensions among three genetic groups of radiata pine

1995 ◽  
Vol 29 (1) ◽  
Author(s):  
L.A. Donaldson
Keyword(s):  
Cell Wall ◽  
Radiata Pine ◽  
Fracture Properties ◽  
Lignin Distribution ◽  
Genetic Groups ◽  
Cell Dimensions

ABNORMAL LIGNIN DISTRIBUTION IN WOOD FROM SEVERELY DROUGHT STRESSED PINUS RADIATA TREES

IAWA Journal ◽  
2002 ◽  
Vol 23 (2) ◽  
pp. 161-178 ◽  
Author(s):  
Lloyd A. Donaldson
Keyword(s):  
Cell Wall ◽  
Secondary Wall ◽  
Sand Dunes ◽  
Middle Lamella ◽  
Wood Properties ◽  
Radiata Pine ◽  
Growth Environment ◽  
Lignin Distribution ◽  
Transmission Electron ◽  
Cell Wall Development

Radiata pine logs exhibiting concentric shelling were examined for abnormal wood anatomy and cell wall characteristics. The trees from which the logs originated were growing on coastal sand dunes with a shallow impermeable iron pan subsoil, and the abnormal wood properties are assumed to be the result of frequent water stress and possible associated nutritional stress. The wood showed numerous false growth rings alternating with bands of poorly lignified tracheids. Examination of lignin distribution by confocal fluorescence microscopy and transmission electron microscopy revealed abnormal cell wall development associated with a poorly lignified middle lamella and outer secondary cell wall. Affected tracheids showed poor adhesion with development of intercellular checking, particularly on radial cell walls. Some tracheids showed concentric lamellation associated with areas of high and low lignification within the secondary wall. In many cases, the S3 layer was thicker and more heavily lignified than normal. Tracheids with the greatest reduction in lignification of the secondary wall showed evidence of collapse. The shelling behaviour of the wood was thus explained by poor or negligible adhesion between tracheids due to reduced lignification of middle lamellae. This investigation provides some insight into the effect of growth environment on lignification.

scholarly journals Enhancement of the physical and mechanical properties of wood using a novel organo-montmorillonite/hyperbranched polyacrylate emulsion

Holzforschung ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Jianfeng Xu ◽  
Xiaoyan Li ◽  
Ling Long ◽  
Ru Liu
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Pinus Radiata ◽  
Wood Sample ◽  
Wood Cell Wall ◽  
Physical And Mechanical Properties ◽  
Radiata Pine ◽  
Compact Structure ◽  
Populus Cathayana ◽  
Modified Wood

AbstractIn this work, a novel waterborne hyperbranched polyacrylate (HBPA) dispersed organo-montmorillonite (OMMT) emulsion was synthesized and used for the treatment of wood in a vacuum environment in order to enhance the physical and mechanical properties of the wood. The sapwood of Cathay poplar (Populus cathayana Rehd.) and Radiata pine (Pinus radiata D.Don) were used as the samples for experimentation. The results showed that the physical and mechanical properties of the wood improved significantly due to the successful penetration of the OMMT and HBPA into the wood cell wall. From it was also observed that OMET completely exfoliated from the HBPA matrix and formed a hydrophobic film covering on the inside walls of the cell lumen. Further, it was observed that the poplar sample displayed better mechanical properties than the pine sample because the pine has a more compact structure when compared to poplar and contains rosin. Furthermore, it was also observed that the mechanical properties of the modified wood sample gradually improved with an increase in the concentration of the emulsion. However, excessive concentration (>4 wt%) did not lead to further improvement.

scholarly journals Microstructure of thermally modified radiata pine wood

BioResources ◽  
2020 ◽  
Vol 16 (1) ◽  
pp. 1523-1533
Author(s):  
José Luis Cabezas-Romero ◽  
Linette Salvo-Sepúlveda ◽  
Helga Contreras-Moraga ◽  
Natalia Pérez-Peña ◽  
Víctor Sepúlveda-Villarroel ◽  
...  
Keyword(s):  
Cell Wall ◽  
Wood Cell Wall ◽  
Morphological Changes ◽  
Untreated Wood ◽  
Radiata Pine ◽  
Treatment Temperature ◽  
Thermal Modification ◽  
Modification Process ◽  
Potential Alternative ◽  
Two Temperatures

The thermal modification of wood is a potential alternative method for improving wood dimensional stability and increasing the resistance of wood to decay. However, during thermal modification, morphological changes occur within the microstructure of the cell, and these confer different properties to the wood. This study investigated the effects of the thermal modification process on the microstructure of radiata pine juvenile wood. Therefore, anatomical measurements were performed via optical microscopy in selected earlywood and latewood samples after each treatment, and the results were compared to untreated wood samples. In this study, two temperatures (190 °C and 210 °C) were considered for the thermal modification process. The results showed that the level of temperature of modification affected to microstructure of cell wall. The cell wall thickness decreased as treatment temperature increased, whereas the average lumen diameter increased slightly as temperature increased. Thermally modified radiata pine showed signs of damage (cracks, broken cells and deformations in the wood cell wall). The proportion of destroyed area increased as temperature increased, and significant differences were evident for the thermal treatment at 210 °C.

scholarly journals Chemical composition, anatomy, lignin distribution, and cell wall structure of Malaysian plant waste fibers

BioResources ◽  
2006 ◽  
Vol 1 (2) ◽  
pp. 220-232 ◽  
Author(s):  
H. P. S. Abdul Khalil ◽  
M. Siti Alwani ◽  
A. K. Mohd Omar
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Cell Wall ◽  
Chemical Composition ◽  
Cell Wall Structure ◽  
Wall Structure ◽  
Anatomical Characteristics ◽  
Lignin Distribution ◽  
Transmission Electron ◽  
Palm Frond

The chemical composition, anatomical characteristics, lignin distribution, and cell wall structure of oil palm frond (OPF), coconut (COIR), pine-apple leaf (PALF), and banana stem (BS) fibers were analyzed. The chemical composition of fiber was analyzed according to TAPPI Methods. Light microscopy (LM) and transmission electron microscopy (TEM) were used to observe and determine the cell wall structure and lignin distribution of various agro-waste fibers. The results revealed differences in anatomical characteristics, lignin distributions, and cell wall structure of the different types of fibers investigated. Nevertheless, transmission electron microscopy (TEM) micrographs have confirmed that the well wall structure, in each case, could be described in terms of a classical cell wall structure, consisting of primary (P) and secondary (S 1 , S 2 , and S 3 ) layers.

Sugarcane cell wall structure and lignin distribution investigated by confocal and electron microscopy

2013 ◽  
Vol 76 (8) ◽  
pp. 829-834 ◽  
Author(s):  
Celso Sant'Anna ◽  
Lilian T. Costa ◽  
Yuri Abud ◽  
Lucas Biancatto ◽  
Flávio Costa Miguens ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cell Wall ◽  
Cell Wall Structure ◽  
Wall Structure ◽  
Lignin Distribution ◽  
Confocal And Electron Microscopy

CELL-WALL LIGNIN CONTENT RELATED TO TRACHEID DIMENSIONS IN DROUGHT-SENSITIVE AUSTRIAN PINE (PINUS NIGRA)

IAWA Journal ◽  
2001 ◽  
Vol 22 (2) ◽  
pp. 113-120 ◽  
Author(s):  
Wolfgang Gindl
Keyword(s):  
Cell Wall ◽  
Lignin Content ◽  
Water Status ◽  
Pinus Nigra ◽  
Lignin Concentration ◽  
Wall Area ◽  
Pine Tree ◽  
Cell Dimensions ◽  
Highly Correlated ◽  
Annual Distribution

The intra-annual distribution of cell-wall lignin concentration was determined in Austrian pine tree rings and compared with tracheid diameter, lumen width, cell wall thickness and proportion of cell wall area. Lignin concentration was highly correlated with all tracheid dimensions, but only the proportion of cell wall area exhibited a direct statistically significant relationship. Since cell dimensions in Austrian pine are subjected to the indirect and direct influences of the water status of trees, the negative correlation between cellular lignin content and the proportion of cell wall area is attributed to an indirect effect of water stress on lignification in pine tracheids.

Ultrastructural Changes in the Cell Walls of Cambial Derivatives During Wood Formation in Indian ELM (Holoptelea Integrifolia)

IAWA Journal ◽  
2012 ◽  
Vol 33 (4) ◽  
pp. 403-416 ◽  
Author(s):  
Karumanchi S. Rao ◽  
Yoon Soo Kim ◽  
Pramod Sivan
Keyword(s):  
Cell Wall ◽  
Cell Walls ◽  
Middle Lamella ◽  
Ultrastructural Changes ◽  
Cell Wall Polysaccharides ◽  
Lignin Distribution ◽  
Parenchyma Cells ◽  
Ray Cells ◽  
Xylem Elements ◽  
S2 Layer

Sequential changes occurring in cell walls during expansion, secondary wall (SW) deposition and lignification have been studied in the differentiating xylem elements of Holoptelea integrifolia using transmission electron microscopy. The PATAg staining revealed that loosening of the cell wall starts at the cell corner middle lamella (CCML) and spreads to radial and tangential walls in the zone of cell expansion (EZ). Lignification started at the CCML region between vessels and associated parenchyma during the final stages of S2 layer formation. The S2 layer in the vessel appeared as two sublayers,an inner one and outer one.The contact ray cells showed SW deposition soon after axial paratracheal parenchyma had completed it, whereas noncontact ray cells underwent SW deposition and lignification following apotracheal parenchyma cells. The paratracheal and apotracheal parenchyma cells differed noticeably in terms of proportion of SW layers and lignin distribution pattern. Fibres were found to be the last xylem elements to complete SW deposition and lignification with differential polymerization of cell wall polysaccharides. It appears that the SW deposition started much earlier in the middle region of the fibres while their tips were still undergoing elongation. In homogeneous lignin distribution was noticed in the CCML region of fibres.

Investigation of lignin distribution in the cell wall of certain woods

2007 ◽  
Vol 2 (1) ◽  
pp. 203-212 ◽  
Author(s):  
Irving B. Sachs ◽  
Ira T. Clark ◽  
John C. Pew
Keyword(s):  
Cell Wall ◽  
Lignin Distribution

Lignin distribution in mild compression wood of Pinus radiata

1999 ◽  
Vol 77 (1) ◽  
pp. 41-50 ◽  
Author(s):  
Lloyd A Donaldson ◽  
Adya P Singh ◽  
Arata Yoshinaga ◽  
Keiji Takabe
Keyword(s):  
Cell Wall ◽  
Fluorescence Microscopy ◽  
Pinus Radiata ◽  
Compression Wood ◽  
Middle Lamella ◽  
Confocal Fluorescence Microscopy ◽  
Interference Microscopy ◽  
Normal Wood ◽  
Lignin Distribution ◽  
Confocal Fluorescence

Lignin distribution in the tracheid cell wall of mild compression wood in Pinus radiata D. Don was examined by interference microscopy, confocal fluorescence microscopy, and ultraviolet (UV) microscopy. Two anatomically different samples of mild compression wood were compared with a sample of normal wood using quantitative interference microscopy and microdensitometry combined with confocal fluorescence microscopy to estimate the quantitative or semiquantitative lignin distribution in the S2 and S2L regions of the secondary cell wall and of the cell corner middle lamella (CCML). One of these samples was briefly examined by UV microscopy for comparison. Quantitative interference microscopy provided information on lignin concentration in different regions of the cell wall with values of 26, 46, and 57%, respectively, for the S2, S2L, and CCML regions of sample 1 and 20, 29, and 46%, respectively, for the same regions of sample 2. Microdensitometry of confocal fluorescence images provided semiquantitative information on the relative lignin distribution based on lignin autofluorescence. Comparison between the two compression wood samples using autofluorescence gave results that were in partial agreement with interference microscopy with respect to the relative lignification levels in the S2, S2L, and CCML regions. Some improvement was achieved by using calibration values for hemicellulose rather than holocellulose for interference data in the S2L region. Results for UV microscopy performed on sample 1 indicated that the lignification of the CCML region was comparable with that of the S2L region in this sample but with some variation among cells. All three techniques indicated significant variation in lignification levels of the S2L and CCML regions among adjacent cells and a significant reduction in the lignification of the CCML region compared to normal wood.Key words: lignin distribution, interference microscopy; confocal fluorescence microscopy, UV microscopy, mild compression wood, Pinus radiata D. Don.

Sign in / Sign up

Export Citation Format

Share Document