The control of vortex shedding behind heated circular cylinders at low Reynolds numbers

1991 ◽  
Vol 10 (4) ◽  
pp. 224-229 ◽  
Author(s):  
J. C. Lecordier ◽  
L. Hamma ◽  
P. Paranthoen
Keyword(s):  
Vortex Shedding ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Low Reynolds Numbers ◽  
Low Reynolds

Feedback control of vortex shedding at low Reynolds numbers

1993 ◽  
Vol 248 ◽  
pp. 267-296 ◽  
Author(s):  
Kimon Roussopoulos
Keyword(s):  
Feedback Control ◽  
Vortex Shedding ◽  
Single Channel ◽  
Water Channel ◽  
Open Water ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Low Reynolds Numbers ◽  
Wake Instability ◽  
Low Reynolds

This paper describes experiments undertaken to study in detail the control of vortex shedding from circular cylinders at low Reynolds numbers by using feedback to stabilize the wake instability. Experiments have been performed both in a wind tunnel and in an open water channel with flow visualization. It has been found that feedback control is able to delay the onset of the wake instability, rendering the wake stable at Reynolds numbers about 20% higher than otherwise. At higher flow rates, however, it was not possible to use single-channel feedback to stabilize the wake - although, deceptively, it was possible to reduce the unsteadiness recorded by a near-wake sensor. When control is applied to a long span only the region near the control sensor is controlled. The results presented in this paper generally support the analytical results of other researchers.

Suppression of vortex shedding behind a circular cylinder by another control cylinder at low Reynolds numbers

2007 ◽  
Vol 573 ◽  
pp. 171-190 ◽  
Author(s):  
A. DIPANKAR ◽  
T. K. SENGUPTA ◽  
S. B. TALLA
Keyword(s):  
Vortex Shedding ◽  
Physical Mechanism ◽  
Grid Method ◽  
Reynolds Numbers ◽  
Accurate Solution ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Low Reynolds Numbers ◽  
Low Reynolds ◽  
Control Cylinder

Vortex shedding behind a cylinder can be controlled by placing another small cylinder behind it, at low Reynolds numbers. This has been demonstrated experimentally by Strykowski & Sreenivasan (J. Fluid Mech. vol. 218, 1990, p. 74). These authors also provided preliminary numerical results, modelling the control cylinder by the innovative application of boundary conditions on some selective nodes. There are no other computational and theoretical studies that have explored the physical mechanism. In the present work, using an over-set grid method, we report and verify numerically the experimental results for flow past a pair of cylinders. Apart from providing an accurate solution of the Navier–Stokes equation, we also employ an energy-based receptivity analysis method to discuss some aspects of the physical mechanism behind vortex shedding and its control. These results are compared with the flow picture developed using a dynamical system approach based on the proper orthogonal decomposition (POD) technique.

Two-dimensional numerical study of vortex shedding regimes of oscillatory flow past two circular cylinders in side-by-side and tandem arrangements at low Reynolds numbers

2014 ◽  
Vol 751 ◽  
pp. 1-37 ◽  
Author(s):  
Ming Zhao ◽  
Liang Cheng
Keyword(s):  
Vortex Shedding ◽  
Oscillatory Flow ◽  
Flow Regimes ◽  
Reynolds Numbers ◽  
The Other ◽  
Circular Cylinders ◽  
Two Dimensional ◽  
Low Reynolds Numbers ◽  
Single Cylinder ◽  
Gap Ratio

AbstractOscillatory flow past two circular cylinders in side-by-side and tandem arrangements at low Reynolds numbers is simulated numerically by solving the two-dimensional Navier–Stokes (NS) equations using a finite-element method (FEM). The aim of this study is to identify the flow regimes of the two-cylinder system at different gap arrangements and Keulegan–Carpenter numbers (KC). Simulations are conducted at seven gap ratios $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}G$ ($G=L/D$ where $L$ is the cylinder-to-cylinder gap and $D$ the diameter of a cylinder) of 0.5, 1, 1.5, 2, 3, 4 and 5 and KC ranging from 1 to 12 with an interval of 0.25. The flow regimes that have been identified for oscillatory flow around a single cylinder are also observed in the two-cylinder system but with different flow patterns due to the interactions between the two cylinders. In the side-by-side arrangement, the vortex shedding from the gap between the two cylinders dominates when the gap ratio is small, resulting in the gap vortex shedding (GVS) regime, which is different from any of the flow regimes identified for a single cylinder. For intermediate gap ratios of 1.5 and 2 in the side-by-side arrangement, the vortex shedding mode from one side of each cylinder is not necessarily the same as that from the other side, forming a so-called combined flow regime. When the gap ratio between the two cylinders is sufficiently large, the vortex shedding from each cylinder is similar to that of a single cylinder. In the tandem arrangement, when the gap between the two cylinders is very small, the flow regimes are similar to that of a single cylinder. For large gap ratios in the tandem arrangement, the vortex shedding flows from the gap side of the two cylinders interact and those from the outer sides of the cylinders are less affected by the existence of the other cylinder and similar to that of a single cylinder. Strong interaction between the vortex shedding flows from the two cylinders makes the flow very irregular at large KC values for both side-by-side and tandem arrangements.

Some new characteristics of the confined flow over circular cylinders at low reynolds numbers

2020 ◽  
Vol 86 ◽  
pp. 108741
Author(s):  
A. Ooi ◽  
L. Chan ◽  
D. Aljubaili ◽  
C. Mamon ◽  
J.S. Leontini ◽  
...  
Keyword(s):  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Low Reynolds Numbers ◽  
Confined Flow ◽  
Low Reynolds
Sign in / Sign up

Export Citation Format

Share Document