Comparative studies of several methods to determine the dynamic fracture toughness of a nuclear pressure vessel steel A508 CL3 with Charpy-size specimen

1996 ◽  
Vol 81 (3) ◽  
pp. 195-204 ◽  
Author(s):  
Zhang Xinping ◽  
Shi Yaowu
Keyword(s):  
Fracture Toughness ◽  
Dynamic Fracture ◽  
Pressure Vessel ◽  
Comparative Studies ◽  
Dynamic Fracture Toughness ◽  
Pressure Vessel Steel ◽  
Vessel Steel

Evaluation of Quasi-Static and Dynamic Fracture Toughness on the Low-Alloy Reactor Pressure Vessel Steel JRQ in the Transition Region

2019 ◽  
Vol 827 ◽  
pp. 294-299
Author(s):  
Philippe Spätig ◽  
V. Mazánová ◽  
S. Suman ◽  
Hans Peter Seifert
Keyword(s):  
Fracture Toughness ◽  
Transition Region ◽  
Dynamic Fracture ◽  
Dynamic Fracture Toughness ◽  
Pressure Vessels ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Master Curve Method ◽  
Reactor Pressure Vessel Steel ◽  
Reactor Pressure

Three point bending and impact tests with sub-sized Charpy specimens were performed on the JRQ reference steel for reactor pressure vessels. Quasi-static and dynamic fracture toughness data were calculated and the fracture behavior in the ductile to brittle transition region was evaluated within the frame of the master curve method (ASTM E1921). Specimens with shallow and deep cracks were studied and the respective influence of crack length and loading rate on the reference transition temperature was determined. The force-time curves of specimens with shallow cracks presented significantly smaller oscillations with respect to the absolute force, making the fracture toughness evaluation more accurate.

Fracture Toughness Characterization of Midland Beltline Weld After High Dose of Irradiation

2006 ◽  
Author(s):  
Mikhail A. Sokolov ◽  
Randy K. Nanstad
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Neutron Fluence ◽  
National Laboratory ◽  
Reactor Pressure Vessel ◽  
High Dose ◽  
Pressure Vessel Steel ◽  
Vessel Steel ◽  
Oak Ridge ◽  
Reactor Pressure

The Heavy-Section Steel Irradiation (HSSI) Program at Oak Ridge National Laboratory includes a task to investigate the shape of the fracture toughness master curve for reactor pressure vessel steel highly embrittled as a consequence of irradiation exposure, and to examine the ability of the Charpy 41-J shift to predict the fracture toughness shift. As part of this task, a low upper-shelf WF-70 weld obtained from the beltline region of the Midland Unit 1 reactor pressure vessel was characterized in terms of static initiation and Charpy impact toughness in the unirradiated and irradiated conditions. Irradiation of this weld was performed at the University of Michigan Ford Reactor at 288°C to neutron fluence of 3.4×1019 neutron/cm2 in the HSSI irradiation-anneal-reirradiation facility. This reusable facility allowed the irradiation of either virgin or previously irradiated material in a well-controlled temperature regime, including the ability to perform in-situ annealing. This was the last capsule irradiated in this facility before reactor shut down. Thus, the Midland beltline weld was irradiated within the HSSI Program to three fluences — 0.5×1019; 1.0×1019; and 3.4×1019 neutron/cm2. It was anticipated that it would provide an opportunity to address fracture toughness curve shape and Charpy 41-J shift compatibility issues at different levels of embrittlement, including the highest dose considered to be in the range of the current end of life fluence. It was found that the Charpy 41-J shift practically saturated after neutron fluence of 1.0×1019 neutron/cm2. The transition fracture toughness shift after 3.4×1019 neutron/cm2 was only slightly higher than that after 1.0×1019 neutron/cm2. In all cases, transition fracture toughness shifts were lower than predicted by the Regulatory Guide 1.99, Rev. 2 equation.

Assessment of Pressure Vessel Steel Irradiation Embrittlement Up to 40 Years Using Local Approach to Fracture Modelling: Application to the French Surveillance Program

2011 ◽  
Author(s):  
B. Tanguy ◽  
A. Parrot ◽  
F. Cle´mendot ◽  
G. Chas
Keyword(s):  
Fracture Toughness ◽  
Pressure Vessel ◽  
Chemical Elements ◽  
Experimental Results ◽  
Physical Models ◽  
Surveillance Program ◽  
Pressure Vessel Steel ◽  
Irradiation Embrittlement ◽  
Vessel Steel ◽  
Different Levels

For western pressure vessel reactors, assessment of pressure vessel steels irradiation embrittlement due to neutron irradiation is based on a semi-empirical formulae which predicts the shift of a reference lower bound fracture toughness curve as a function of fluence and embrittlement-involved chemical elements. Periodically, in order to monitor the embrittlement of each RPV, the predictions of the formulae is confronted to experimental results obtained from Charpy specimens located in surveillance capsules irradiated with a higher fluence level than the pressure vessel itself. Historically only the shift of the temperature index defined for a given level of energy, e.g. 56J in the French surveillance program, is used. In support to the French surveillance program methodology, for some of the French RPVs, physical models of fracture (for both cleavage and ductile fracture) are used to analyse in details the whole experimental basis available at different levels of fluence. This study presents the methodology developed in order to analyse the experimental results of a RPV steel from the french surveillance program, including Charpy and fracture toughness tests at different levels of fluence i.e. of embrittlement. The methodology applied aims to use the numerous Charpy tests results available in order to assess, at the same fluence levels, the fracture toughness embrittlement. The results are then compared to available fracture toughness results for a given level of embrittlement.

Sign in / Sign up

Export Citation Format

Share Document