A continuum damage mechanics approach to crack tip shielding in brittle solids

1991 ◽  
Vol 50 (2) ◽  
pp. 79-114 ◽  
Author(s):  
C. L. Chow ◽  
T. J. Lu
Keyword(s):  
Damage Mechanics ◽  
Crack Tip ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Brittle Solids ◽  
Crack Tip Shielding

A Method to Generate Damage Functions for Quasi-Brittle Solids

2004 ◽  
Vol 72 (4) ◽  
pp. 553-557 ◽  
Author(s):  
D. Cope ◽  
S. Yazdani ◽  
J. W. Ju
Keyword(s):  
Strain Hardening ◽  
Damage Mechanics ◽  
Formal Method ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Stress Space ◽  
Damage Functions ◽  
Brittle Solids ◽  
Strain Stress

In continuum damage mechanics theories, damage functions are identified based on experimental records. These functions also serve as strain hardening-softening functions similar to the conventional plasticity formulations. In a class of damage theories described in this paper it will be shown that if care is not taken, internal contradictions will arise as manifested by a snapback in the strain–stress space. This paper establishes a formal method by which different damage functions can consistently be developed leading to no snap-back in the solution.

Continuum Damage Mechanics and Creep Life Analysis

1999 ◽  
Vol 67 (1) ◽  
pp. 193-196 ◽  
Author(s):  
G. J. Rodin
Keyword(s):  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Creep Life ◽  
Mechanics Model ◽  
Brittle Solids ◽  
Life Analysis

It is shown that the original continuum damage mechanics model of Kachanov is better suited for creep life analysis of creep-brittle solids and structures than continuum damage mechanics models that take into account damage-induced softening. [S0021-8936(00)03001-4]

A Continuum Damage Model for Fracture of Brittle Solids Under Dynamic Loading

1991 ◽  
Vol 58 (4) ◽  
pp. 904-909 ◽  
Author(s):  
E. P. Fahrenthold
Keyword(s):  
Damage Mechanics ◽  
Evolution Equations ◽  
Accumulation Rate ◽  
Damage Model ◽  
Continuum Damage Mechanics ◽  
Mechanical Tests ◽  
Continuum Damage ◽  
Power Functions ◽  
Tensor Power ◽  
Brittle Solids

A continuum damage mechanics description of elastic-brittle fracture provides an appropriate constitutive model for impact simulations involving ceramic, rock, or similar materials. For an orthotropically damaged solid, a complementary energy function may be derived from a mesomechanical description of three orthogonal arrays of coalescing cracks. Damage evolution equations suggested by dynamic fracture test measurements may be expressed in terms of tensor power functions which generalize classical one-dimensional analyses. Measured Weibull strength distributions may be employed to account for flaw size distribution effects on the damage accumulation rate. The resulting model avoids the introduction of effective stress assumptions or the use of specialized material property coefficients obtained from nonstandard mechanical tests.

Fatigue Life of the Human Teeth: A Continuum Damage Approach

2019 ◽  
Vol 43 ◽  
pp. 1-19
Author(s):  
Theddeus Tochukwu Akano
Keyword(s):  
Fatigue Life ◽  
Damage Mechanics ◽  
Stress Amplitude ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Elastoplastic Model ◽  
Human Teeth ◽  
Proposed Model ◽  
Number Of Cycles ◽  
Cycles To Failure

Normal oral food ingestion processes such as mastication would not have been possible without the teeth. The human teeth are subjected to many cyclic loadings per day. This, in turn, exerts forces on the teeth just like an engineering material undergoing the same cyclic loading. Over a period, there will be the creation of microcracks on the teeth that might not be visible ab initio. The constant formation of these microcracks weakens the teeth structure and foundation that result in its fracture. Therefore, the need to predict the fatigue life for human teeth is essential. In this paper, a continuum damage mechanics (CDM) based model is employed to evaluate the fatigue life of the human teeth. The material characteristic of the teeth is captured within the framework of the elastoplastic model. By applying the damage evolution equivalence, a mathematical formula is developed that describes the fatigue life in terms of the stress amplitude. Existing experimental data served as a guide as to the completeness of the proposed model. Results as a function of age and tubule orientation are presented. The outcomes produced by the current study have substantial agreement with the experimental results when plotted on the same axes. There is a notable difference in the number of cycles to failure as the tubule orientation increases. It is also revealed that the developed model could forecast for any tubule orientation and be adopted for both young and old teeth.

Modelling the asymmetric tension–compression properties of additively manufactured alloys using continuum damage mechanics

2021 ◽  
pp. 146442072110134
Author(s):  
A Nayebi ◽  
H Rokhgireh ◽  
M Araghi ◽  
M Mohammadi
Keyword(s):  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Element Model ◽  
Continuum Damage ◽  
Compression Tests ◽  
Compression Properties ◽  
Mechanics Model ◽  
Stress Components ◽  
Tension And Compression ◽  
Closure Effect

Additively manufactured parts often comprise internal porosities due to the manufacturing process, which needs to be considered in modelling their mechanical behaviour. It was experimentally shown that additively manufactured parts’ tensile and compressive mechanical properties are different for various metallic alloys. In this study, isotropic continuum damage mechanics is used to model additively manufactured alloys’ tension and compression behaviours. Compressive stress components can shrink discontinuities present in additively manufactured alloys. Therefore, the crack closure effect was employed to describe different behaviours during uniaxial tension and compression tests. A finite element model embedded in an ABAQUS’s UMAT format was developed to account for the isotropic continuum damage mechanics model. The numerical results of tension and compression tests were compared with experimental observations for additively manufactured maraging steel, AlSi10Mg and Ti-6Al-4V. Stress–strain curves in tension and compression of these alloys were obtained using the continuum damage mechanics model and compared well with the experimental results.

Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics

2017 ◽  
Vol 38 (1) ◽  
pp. 25-30
Author(s):  
Yan-Feng Li ◽  
Zhisheng Zhang ◽  
Chenglin Zhang ◽  
Jie Zhou ◽  
Hong-Zhong Huang
Keyword(s):  
Numerical Analysis ◽  
Test Data ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Model ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Life Prediction ◽  
Turbine Disc

Abstract This paper deals with the creep characteristics of the aircraft turbine disc material of nickel-base superalloy GH4169 under high temperature. From the perspective of continuum damage mechanics, a new creep life prediction model is proposed to predict the creep life of metallic materials under both uniaxial and multiaxial stress states. The creep test data of GH4169 under different loading conditions are used to demonstrate the proposed model. Moreover, from the perspective of numerical simulation, the test data with analysis results obtained by using the finite element analysis based on Graham creep model is carried out for comparison. The results show that numerical analysis results are in good agreement with experimental data. By incorporating the numerical analysis and continuum damage mechanics, it provides an effective way to accurately describe the creep damage process of GH4169.

Sign in / Sign up

Export Citation Format

Share Document