On the measurement of critical crack-opening-displacement when slow crack growth precedes rapid fracture

1975 ◽  
Vol 11 (6) ◽  
pp. 933-938
Author(s):  
G. Berry ◽  
R. Brook
Keyword(s):  
Crack Growth ◽  
Crack Opening Displacement ◽  
Slow Crack Growth ◽  
Crack Opening ◽  
Opening Displacement ◽  
Critical Crack ◽  
Critical Crack Opening

Test for Crack Opening Displacement of Steel Fiber Reinforced Concrete under Three-Point Bending

2010 ◽  
Vol 36 ◽  
pp. 157-161 ◽  
Author(s):  
Tin Gyi Zhang ◽  
Yuan Bao Leng ◽  
Dan Ying Gao
Keyword(s):  
Crack Opening Displacement ◽  
Crack Opening ◽  
Mouth Opening ◽  
Crack Tip ◽  
Crack Mouth Opening Displacement ◽  
Crack Tip Opening Displacement ◽  
Opening Displacement ◽  
Critical Crack ◽  
Critical Crack Opening ◽  
Crack Tip Opening

Based on the principle of electrical measurement method, the clip gauge was made to measure the crack opening displacement (COD).Through the three-point bending test on the specimens of steel fiber reinforced high strength concrete (SFHSC), the effect of the fiber volume fraction (ρf) upon the critical crack opening displacement (the critical crack tip opening displacement and the critical crack mouth opening displacement) was studied. The result shows that the effect of ρf on mouth-tip ratio (the ratio of critical crack mouth opening displacement to critical crack tip opening displacement) can reflect its effect upon the critical crack opening displacement. According to the geometrical relationship between the initial crack length and the critical crack opening displacement，calculation method for the initial crack length was proposed. Based on the test result, the formula was established for calculating the critical crack tip opening displacement.

The crack opening displacement approach to fracture mechanics in yielding materials

1966 ◽  
Vol 1 (2) ◽  
pp. 145-153 ◽  
Author(s):  
F. M. Burdekin ◽  
D. E. W. Stone
Keyword(s):  
Fracture Mechanics ◽  
Crack Opening Displacement ◽  
Crack Opening ◽  
Opening Displacement ◽  
Critical Crack ◽  
Absolute Size ◽  
Linear Elastic ◽  
Elastic Fracture ◽  
Critical Crack Opening ◽  
Displacement Approach

An introduction is given to the fracture mechanics approach employing the concept of crack opening displacement for application to situations in which linear elastic fracture mechanics is invalidated by yielding. The hypothesis of a critical crack opening displacement to fracture has been examined experimentally using mild steel specimens of vastly differing dimensions. Subsidiary experiments have been carried out to define the factors responsible for the apparent effect of absolute size on the results. A theoretical analysis simulates elastic-plastic conditions to give a relationship between applied stresses and strains, crack length, and crack opening displacement.

Evaluation of Wedge Splitting Fracture Tests Using the Double-K Model: Analysis of the Effect of Hemp Fibre Dosage and Length in Concrete Specimens

2016 ◽  
Vol 249 ◽  
pp. 142-146
Author(s):  
Hana Šimonová ◽  
Ivana Havlíková ◽  
Jakub Sobek ◽  
Alaa Abdulrahman ◽  
Zbyněk Keršner ◽  
...  
Keyword(s):  
Fracture Toughness ◽  
Crack Propagation ◽  
Crack Opening Displacement ◽  
Crack Opening ◽  
Opening Displacement ◽  
Critical Crack ◽  
Hemp Fibre ◽  
Fracture Tests ◽  
Critical Crack Opening ◽  
Wedge Splitting

This paper deals with the results obtained from the employment of a selected fracture model to evaluate wedge splitting fracture tests carried out on hemp fibre concrete specimens. The research work was focused mainly on the effect of the dosage and length of hemp fibres on the initiation part of crack propagation in concrete specimens, and on critical crack opening displacement. Concrete mixtures with different volumetric dosages (0.5, 1.0 and 2.0 %) and fibre lengths (10, 20 and 40 mm) were prepared, and six identical specimens were cast from each mixture. Specimens were also cast from a reference mixture, which was without fibres. The specimens were provided with an initial notch and tested using the wedge splitting test method. Load versus crack mouth opening displacement diagrams were recorded during testing and (after data filtering and appropriate modifications) subsequently evaluated using the Double-K fracture model. This model allows the evaluation of two material parameters – the initiation fracture toughness, which defines the onset of stable crack propagation, and the unstable fracture toughness, which defines the onset of unstable cracking or failure. Finally, the critical crack opening displacement was determined with the assumption of the bilinear function of softening in tension.

The Fracture Toughness of Hardened Tool Steels

1987 ◽  
Vol 109 (4) ◽  
pp. 314-318 ◽  
Author(s):  
D. F. Watt ◽  
Pamela Nadin ◽  
S. B. Biner
Keyword(s):  
Fracture Toughness ◽  
Crack Growth ◽  
Slow Crack Growth ◽  
Crack Opening ◽  
Compact Tension ◽  
Testing Procedure ◽  
Tool Steels ◽  
Opening Displacement ◽  
Tempering Temperature ◽  
Toughness Testing

This report details the development of a three-stage fracture toughness testing procedure used to study the effect of tempering temperature on toughness in 01 tool steel. Modified compact tension specimens were used in which the fatigue precracking stage in the ASTM E-399 Procedure was replaced by stable precracking, followed by a slow crack growth. The specimen geometry has been designed to provide a region where slow crack growth can be achieved in brittle materials. Three parameters, load, crack opening displacement, and time have been monitored during the testing procedure and a combination of heat tinting and a compliance equation have been used to identify the position of the crack front. Significant KIC results have been obtained using a modified ASTM fracture toughness equation. An inverse relationship between KIC and hardness has been measured.

J-Integral and Crack Opening Displacement as Crack Initiation Criteria in Rubber

1986 ◽  
Vol 59 (5) ◽  
pp. 787-799 ◽  
Author(s):  
R. F. Lee ◽  
J. A. Donovan
Keyword(s):  
Crack Initiation ◽  
Carbon Black ◽  
Crack Growth ◽  
Crack Opening ◽  
Crack Tip ◽  
J Integral ◽  
Carbon Black Content ◽  
Opening Displacement ◽  
Critical Crack ◽  
Growth Initiation

Abstract 1. Evaluation of ∫σdδ where σ is the net section stress and δ is the deformed crack tip diameter requires only one specimen to characterize the initiation of crack growth in unfilled and carbon-black-filled NR. 2. ∫σdδ is equal to one half of the J-integral for crack growth initiation, which is identical to the Thomas tearing energy for a blunt notch. 3. The critical J-integral for crack initiation increases linearly with carbon black content. 4. The critical crack tip radius for crack initiation is independent of carbon black content, and the required crack tip region stress increases linearly with carbon black content.

Sign in / Sign up

Export Citation Format

Share Document