Crack opening displacement in pressurized spheres with surface cracks

1985 ◽  
Vol 28 (3) ◽  
pp. 151-160
Author(s):  
A. G. Miller
Keyword(s):  
Crack Opening Displacement ◽  
Crack Opening ◽  
Surface Cracks ◽  
Opening Displacement

Fatigue Crack Growth Tests on Glass Fibre Reinforced Polymer Matrix Composite

2005 ◽  
Vol 473-474 ◽  
pp. 189-194
Author(s):  
Zilia Csomós ◽  
János Lukács
Keyword(s):  
Cyclic Loading ◽  
Crack Opening Displacement ◽  
Matrix Composite ◽  
Glass Fibre ◽  
Crack Opening ◽  
Loading Conditions ◽  
Opening Displacement ◽  
Interfacial Cracks ◽  
Glass Fibre Reinforced ◽  
Number Of Cycles

E-glass fibre reinforced polyester matrix composite was investigated, which was made by pullwinding process. Round three point bending (RTPB) specimens were tested under quasi-static and mode I cyclic loading conditions. Load vs. displacement (F-f), load vs. crack opening displacement (F-v) and crack opening displacement range vs. number of cycles (ΔCOD-N) curves were registered and analysed. Interfacial cracks were caused the final longitudinal fracture of the specimens under quasi-static and cyclic loading conditions.

Uncertainty Characterization of the CrCOD Circumferential Crack Opening Displacement Module for xLPR

2015 ◽  
Author(s):  
Richard Olson ◽  
Paul Scott
Keyword(s):  
Crack Opening Displacement ◽  
Crack Opening ◽  
Opening Displacement ◽  
Crack Face ◽  
Pipe Surface ◽  
Circumferential Crack ◽  
The Us ◽  
Experimental Values ◽  
Metal Weld

The US NRC/EPRI xLPR (eXtremely Low Probability of Rupture) probabilistic pipe fracture analysis program uses deterministic modules as the foundation for the calculation of the probability of pipe leak or rupture as a consequence of active degradation mechanisms, vibration or seismic loading. The circumferential crack opening displacement module, CrCOD, estimates crack opening displacement (COD) at the inside pipe surface, at the mid-wall thickness location, and at the outside pipe surface using a combined tension/crack face pressure/bending GE/EPRI-like solution. Each module has an uncertainty beyond the uncertainty of the xLPR data inputs. This paper documents the uncertainty for CrCOD. Using 36 pipe fracture experiments, including: base metal, similar metal weld, and dissimilar metal weld experiments; bend only and pressure and bend loading; static and dynamic load histories; cracks that range from short to long, the uncertainty of the CrCOD methodology is characterized. Module uncertainty is presented in terms mean fit and standard deviation between prediction and experimental values.

Sign in / Sign up

Export Citation Format

Share Document