Biomass Energy Sources and Conversion Technologies for Production of Biofuels

Author(s):  
Majeti Narasimha Vara Prasad
Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3398
Author(s):  
Mariusz Jerzy Stolarski ◽  
Paweł Dudziec ◽  
Michał Krzyżaniak ◽  
Ewelina Olba-Zięty

Conventional energy sources often do not fully satisfy the needs of a modern economy, especially given the climate changes associated with them. These issues should be addressed by diversification of energy generation, including the development of renewable energy sources (RES). Solid biomass will play a major part in the process in Poland. The function of rural areas, along with a well-developed agricultural and forest economy sector, will be a key aspect in this as these areas are suitable for solid biomass acquisition in various ways. This study aimed to determine the solid biomass energy potential in the commune of Goworowo to illustrate the potential in the smallest administrative units of Poland. This research determined the environmental and natural conditions in the commune, which helped to identify the crucial usable solid biomass resources. The total energy potential of solid biomass resources in the commune of Goworowo amounted to 97,672 GJ y−1. The highest potential was accumulated in straw surplus (37,288 GJ y−1) and the lowest was in wood from roadside maintenance (113 GJ y−1). This study showed that rural areas could soon play a significant role in obtaining solid biomass, and individual communes could become spaces for the diversification of energy feedstock.


2009 ◽  
Vol 15 (1) ◽  
pp. 25-36
Author(s):  
Branko Blazevic

In this paper, the author focuses on the fundamental hypothesis that the adoption of a concept of regional sustainable development and the use of renewable energy sources are preconditions to organising an acceptable regional tourism offering based on an eco-philosophy The renewable development of tourism regions is the basic framework for research regarding opportunities for introducing renewable energy sources such as hydro energy, wind power, solar energy, geothermal energy, and biomass energy. The purpose of this paper is to indicate the real opportunities that exist for substituting conventional energy sources with renewable ones and the role of renewables in regional development from economic, environmental and sociological viewpoints. It should also be noted that renewable energy sources have a strong regional importance and can contribute significantly to local employment.


2015 ◽  
Vol 9 (1) ◽  
pp. 55-62
Author(s):  
János Szendrei ◽  
Edit Szűcs ◽  
Gábor Grasselli

The most sustainable energy is the energy not used. Best way to (not) use energy is the proper design of a facility or an energy consuming system. The remaining energy needs have to be covered with energy utilisation of waste materials, renewable energy sources and, until the previous solutions are not sufficient to satisfy the energy demands, the last is the use of conventional fossil and nuclear energy sources. In terms of renewable energy, biomass has an important role today. However, there is a difference between available inputs and utilisation when considering biomass energy possibilities in rural and urban context. This paper suggests biomass energy possibilities that are recommendable in rural context: possibilities of solid biomass combustion, of liquid biofuels and of anaerobe digestion. Also important are possibilities of solid biomass combustion and wet biomass digestion for urban energy production, although with some remarks on system considerations of urban biomass. Most advanced solutions for sustainable management of biomass energy include circular systems, both in rural and urban context, as recommended.


Author(s):  
Hanna Irena Jędrzejuk

This chapter describes a general issue of selecting renewable energy sources (RES) and technical systems. To achieve the nearly zero-energy building (nZEB) standard, application of an RES (e.g., solar, wind, geothermal, hydropower, and biomass energy) is necessary. Each type of RES has specific characteristics and can be used to produce electricity and/or heat in certain systems. A short review of various systems using renewable energy sources is presented. To find the required and satisfactory solution that guaranties meeting the nZEB standard, an analysis must be carried out considering a number of aspects: local availability, structure and time-dependence of energy demand, building construction, economic conditions, legal regulations, and specific requirements. Finally, two examples of modernisation towards the nZEB standard are included.


Author(s):  
Talip Arsu

Electricity generation, one of the renewable energy sources (RES), delivers a solution for various problems such as energy efficiency, energy supply security, reducing foreign dependency, and especially, environmental concerns. However, the solutions provided for these problems bring along the question of which RESs are produced more effectively. Therefore, in this research, RESs used for electricity generation in Turkey were analyzed by using generation data to show which one is more effective. Bi-objective multiple-criteria data envelopment analysis (BiO-MCDEA) method, a goal programming-based efficiency determination method, was used for the efficiency analysis conducted for five years between the years of 2014 and 2018. As a result of the analysis, geothermal energy came into prominence as the most effective RES for all of the years included in the solution. Geothermal energy was followed by biomass energy, wind energy, hydroelectric, and solar energy, respectively.


Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2051 ◽  
Author(s):  
Renato Lemm ◽  
Raphael Haymoz ◽  
Astrid Björnsen Gurung ◽  
Vanessa Burg ◽  
Tom Strebel ◽  
...  

The transition towards a reliable, sustainable, low-carbon energy system is a major challenge of the 21st century. Due to the lower energy density of many renewable energy sources, a future system is expected to be more decentralized, leading to significant changes at the regional scale. This study analyzes the feasibility of the energy transition in the Swiss canton of Aargau as an illustrative example and explores different strategies to satisfy the local demand for electricity, heat, and fuel by 2035. In particular, we assess the potential contribution of biomass. Four scenarios demonstrate what energy demand proportion could be covered by bioenergy if different priorities were given to the provision of heat, electricity, and fuel. The impact of improved conversion technologies is also considered. The results show that the sustainably available renewable energy sources in canton Aargau will probably not be sufficient to cover its forecasted energy demand in 2035, neither with present nor future biomass conversion technologies. At best, 74% of the energy demand could be met by renewables. Biomass can increase the degree of autarky by a maximum of 13%. Depending on the scenario, at least 26–43% (2500–5700 GWh) of total energy demand is lacking, particularly for mobility purposes.


Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 687 ◽  
Author(s):  
Lizhi Zhang ◽  
Fan Li ◽  
Bo Sun ◽  
Chenghui Zhang

The combined cooling, heating, and power (CCHP) systems coupled with solar energy and biomass energy can meet the needs of island or rural decentralized and small-scale integrated energy use, which have become increasingly popular in recent years. This study presents a renewable energy sources integrated combined cooling, heating, and power (RES-CCHP) system, driven by a biogas fueled internal combustion engine (ICE) and photovoltaic (PV) panels, which is different from the traditional natural gas CCHP system. Owing to the solar energy volatility and the constraint of biomass gas production, the traditional optimization design method is no longer applicable. To improve the energetic, economic and environmental performances of the system, an integrated design method with renewable energy capacity, power equipment capacity and key operating parameters as optimization variables is proposed. In addition, a case study of a small farm in Jinan, China, is conducted to verify the feasibility of the proposed RES–CCHP system structure and the corresponding optimal operation strategy. The results illustrate that the implementation of the optimal design is energy-efficient, economical and environmentally-friendly. The values of primary energy saving ratio, annual total cost saving rate and carbon emission reduction ratio are 20.94%, 11.73% and 40.79%, respectively. Finally, the influence of the volatility of renewable energy sources on the optimization method is analyzed, which shows that the RES–CCHP system and the method proposed are robust.


2019 ◽  
Vol 11 (2) ◽  
pp. 528 ◽  
Author(s):  
Leonel Nunes ◽  
Radu Godina ◽  
João Matias

The growing increase in world energy consumption favors the search for renewable energy sources. One of the existing options for the growth and sustainable development of such types of sources is through the use of biomass as an input. The employment of biomass as solid fuel is widely studied and is no longer a novelty nor presents any difficulty from the technical point of view. It presents, however, logistic obstacles, thus not allowing their direct dissemination in every organization that is willing to replace it as an energy source. Use of biomass can be rewarding due to the fact that it can bring significant economic gains attained due to the steadiness of the biomass price in Portugal. However, the price may rise as predicted in the coming years, although it will be a gradual rising. The main goal of this study was to analyze whether biomass in the case of the Portuguese textile industry can be a viable alternative that separates the possibility of sustainable growth from the lack of competitiveness due to high energy costs. The study showed that biomass can be a reliable, sustainable and permanent energy alternative to more traditional energy sources such as propane gas, naphtha and natural gas for the textile industry. At the same time, it can bring savings of 35% in energy costs related to steam generation. Also, with new technology systems related to the Internet of Things, a better on-time aware of needs, energy production and logistic chain information will be possible.


Ecology ◽  
2019 ◽  
Author(s):  
Barry D. Solomon

Biofuels were humanity’s earliest energy carrier in the form of firewood. Forest biomass energy was the dominant energy form used in the United Kingdom, United States, and other industrialized countries before the Industrial Revolution when coal took over. Traditional biomass energy resources such as firewood and straw still dominate energy consumption today in sub-Saharan Africa, Myanmar, Nepal, Cambodia, Guatemala, and Haiti, and it is the largest renewable energy source used worldwide. However, biomass energy sources are not always used sustainably. Since these energy sources are used for heating and cooking, they can be considered biofuel, though most 21st-century analysts more commonly think of biofuel as alternative transportation fuels such as ethanol, biodiesel, methanol, and biobutanol. These modern, “advanced” forms of biofuel are divided into “first generation”—based on food sources such as starch, sugar, animal fats, and vegetable oils (especially corn oil, soy oil, and sugarcane); “second generation”—based on non-food feedstocks such as lignocellulosic biomass (e.g., agricultural and forestry residues, short rotation woody crops, Miscanthus and switchgrass); and “third generation”—based on algae and synthetic biology. This bibliography will address the considerable scholarship and special concerns raised by ecologists over biofuel feedstock production and use. To accurately analyze the ecological effects of biofuel crop growth, baseline land use, and indirect land-use change caused by their production must be considered. It should also be noted that biofuel crops produce multiple products that are used in multiple markets, such as human food, animal feed, specialty chemicals, electricity, among others. Since biofuels and ecology is a somewhat interdisciplinary and transdisciplinary subject, however, not all works listed herein have been authored by ecologists. Readers may also want to see the separate Oxford Bibliographies article “Geography of Biofuels.” The next section of this article will cover some broad overviews written by ecologists on the topic. Following that, we will list some of the major journals that have published much of the leading scholarship on biofuels and ecology. The rest of this review is divided into four main sections, though these are not mutually exclusive: Land Use and Land-Use Change, Ecosystem Services, Biodiversity, and Alternative Ecologies. In each section, relevant subthemes of importance to ecologists will be identified and discussed.


Sign in / Sign up

Export Citation Format

Share Document