Linking Fluorometry to Radiometry with Physical and Chemical Transfer Standards: Instrument Characterization and Traceable Fluorescence Measurements

The laser-induced fluorescence technique is based on the excitation of molecules of a fluorescent material by a light source. The main advantage of this technique is that it has the potential to quantify the lubricant film thickness throughout the cycle. Similar to all the other optical techniques, it has this major advantage compared to the electrical techniques where the oil film can be measured only under the piston rings. In this work, experimental data from a simulating single-ring test rig are presented and further parametric analysis is given regarding cavitation in lubricants that was, at first, in the case of the single-ring test rig, evident in laser-induced fluorescence measurements. Different lubricants are used for the laser-induced fluorescence experiments and the different laser-induced fluorescence signals are analysed and interpreted compared to their physical and chemical properties and, furthermore, with the aid of imaging through a glass liner, a clearer picture is given regarding the cavitation shapes together with the respective laser-induced fluorescence measurements and cavitation initiation.

Download Full-text

Statistical criteria of stellar population types

Symposium - International Astronomical Union ◽

10.1017/s0074180900053304 ◽

1966 ◽

Vol 24 ◽

pp. 101-110

Author(s):

W. Iwanowska

Keyword(s):

Stellar Population ◽

Chemical Properties ◽

Spectrophotometric Study ◽

Physical And Chemical Properties ◽

Population Type ◽

The Galaxy ◽

Distribution Parameters ◽

Physical And Chemical ◽

Statistical Criteria ◽

And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Download Full-text

Biophysical Measurement of Molecular Weight of Foot-and-Mouth Disease RNA Fragments

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100051323 ◽

1974 ◽

Vol 32 ◽

pp. 262-263

Author(s):

Sydney S. Breese ◽

Howard L. Bachrach

Keyword(s):

Chemical Properties ◽

Foot And Mouth Disease ◽

Mouth Disease ◽

Distilled Water ◽

Bovine Plasma ◽

Mouth Disease Virus ◽

Foot And Mouth ◽

Carbon Coated ◽

Rna Fragments ◽

Physical And Chemical

Continuing studies on the physical and chemical properties of foot-and-mouth disease virus (FMDV) have included electron microscopy of RNA strands released when highly purified virus (1) was dialyzed against demlneralized distilled water. The RNA strands were dried on formvar-carbon coated electron microscope screens pretreated with 0.1% bovine plasma albumin in distilled water. At this low salt concentration the RNA strands were extended and were stained with 1% phosphotungstic acid. Random dispersions of strands were recorded on electron micrographs, enlarged to 30,000 or 40,000 X and the lengths measured with a map-measuring wheel. Figure 1 is a typical micrograph and Fig. 2 shows the distributions of strand lengths for the three major types of FMDV (A119 of 6/9/72; C3-Rezende of 1/5/73; and O1-Brugge of 8/24/73.

Download Full-text

Radiation-induced surface decomposition

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075592 ◽

1983 ◽

Vol 41 ◽

pp. 368-369

Author(s):

M. L. Knotek

Keyword(s):

Ionizing Radiation ◽

Atomic Structure ◽

Chemical Bonding ◽

Neutral Species ◽

Radiation Induced ◽

Physical And Chemical ◽

Surface Decomposition ◽

The Relationship ◽

Electron And Photon ◽

Surface Bond

Modern surface analysis is based largely upon the use of ionizing radiation to probe the electronic and atomic structure of the surfaces physical and chemical makeup. In many of these studies the ionizing radiation used as the primary probe is found to induce changes in the structure and makeup of the surface, especially when electrons are employed. A number of techniques employ the phenomenon of radiation induced desorption as a means of probing the nature of the surface bond. These include Electron- and Photon-Stimulated Desorption (ESD and PSD) which measure desorbed ionic and neutral species as they leave the surface after the surface has been excited by some incident ionizing particle. There has recently been a great deal of activity in determining the relationship between the nature of chemical bonding and its susceptibility to radiation damage.

Download Full-text

High resolution electron microscopy of lanthanum phosphate crystals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100108519 ◽

1978 ◽

Vol 36 (1) ◽

pp. 274-275

Author(s):

J. C. Wheatley ◽

J. M. Cowley

Keyword(s):

Electron Microscopy ◽

Catalytic Activity ◽

High Resolution ◽

Petroleum Industry ◽

High Resolution Electron Microscopy ◽

Lanthanum Phosphate ◽

Good Catalyst ◽

Resolution Electron ◽

Good Catalytic Activity ◽

Physical And Chemical

Rare-earth phosphates are of particular interest because of their catalytic properties associated with the hydrolysis of many aromatic chlorides in the petroleum industry. Lanthanum phosphates (LaPO4) which have been doped with small amounts of copper have shown increased catalytic activity (1). However the physical and chemical characteristics of the samples leading to good catalytic activity are not known.Many catalysts are amorphous and thus do not easily lend themselves to methods of investigation which would include electron microscopy. However, the LaPO4, crystals are quite suitable samples for high resolution techniques.The samples used were obtained from William L. Kehl of Gulf Research and Development Company. The electron microscopy was carried out on a JEOL JEM-100B which had been modified for high resolution microscopy (2). Standard high resolution techniques were employed. Three different sample types were observed: 669A-1-5-7 (poor catalyst), H-L-2 (good catalyst) and 27-011 (good catalyst).

Download Full-text

Tailoring microstructures of materials through biomimetics

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100148332 ◽

1993 ◽

Vol 51 ◽

pp. 500-501

Author(s):

Mehmet Sarikaya ◽

Ilhan A. Aksay

Keyword(s):

Chemical Properties ◽

Design And Synthesis ◽

Structure Sensitive ◽

Macro Scale ◽

Methods Of Synthesis ◽

Successive Level ◽

Engineering Materials ◽

Physical And Chemical ◽

And Chemical Properties ◽

Synthesis Of Materials

Biomimetics involves investigation of structure, function, and methods of synthesis of biological composite materials. The goal is to apply this information to the design and synthesis of materials for engineering applications.Properties of engineering materials are structure sensitive through the whole spectrum of dimensions from nanometer to macro scale. The goal in designing and processing of technological materials, therefore, is to control microstructural evolution at each of these dimensions so as to achieve predictable physical and chemical properties. Control at each successive level of dimension, however, is a major challenge as is the retention of integrity between successive levels. Engineering materials are rarely fabricated to achieve more than a few of the desired properties and the synthesis techniques usually involve high temperature or low pressure conditions that are energy inefficient and environmentally damaging.In contrast to human-made materials, organisms synthesize composites whose intricate structures are more controlled at each scale and hierarchical order.

Download Full-text

Characterization of defects in tabular silver halide grains

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100178367 ◽

1990 ◽

Vol 48 (4) ◽

pp. 1046-1047

Author(s):

C. Goessens ◽

D. Schryvers ◽

J. Van Landuyt ◽

A. Verbeeck ◽

R. De Keyzer

Keyword(s):

Radiation Damage ◽

Silver Halide ◽

Chemical Characteristics ◽

X Ray ◽

Free Region ◽

Central Defect ◽

Crystallographic Defects ◽

Physical And Chemical ◽

Two Sides

Silver halide grains (AgX, X=Cl,Br,I) are commonly recognized as important entities in photographic applications. Depending on the preparation specifications one can grow cubic, octahedral, tabular a.o. morphologies, each with its own physical and chemical characteristics. In the present study crystallographic defects introduced by the mixing of 5-20% iodide in a growing AgBr tabular grain are investigated. X-ray diffractometry reveals the existence of a homogeneous Ag(Br1-xIx) region, expected to be formed around the AgBr kernel. In fig. 1 a two-beam BF image, taken at T≈100 K to diminish radiation damage, of a triangular tabular grain is presented, clearly showing defect contrast fringes along four of the six directions; the remaining two sides show similar contrast under relevant diffraction conditions. The width of the central defect free region corresponds with the pure AgBr kernel grown before the mixing with I. The thickness of a given grain lies between 0.15 and 0.3 μm: as indicated in fig. 2 triangular (resp. hexagonal) grains exhibit an uneven (resp. even) number of twin interfaces (i.e., between + and - twin variants) parallel with the (111) surfaces. The thickness of the grains and the existence of the twin variants was confirmed from CTEM images of perpendicular cuts.

Download Full-text