Efficient Technique for Fast IP Traceback

2006 ◽  
pp. 211-218
Author(s):  
Byungryong Kim
Keyword(s):  
Efficient Technique ◽  
Ip Traceback

Characterization of machined polystyrene foam

1989 ◽  
Vol 47 ◽  
pp. 372-373
Author(s):  
C. W. Price ◽  
E. F. Lindsey ◽  
R. M. Franks ◽  
M. A. Lane
Keyword(s):  
Surface Finish ◽  
Cell Walls ◽  
Surface Structures ◽  
Efficient Technique ◽  
Low Density ◽  
Polystyrene Foam ◽  
Planar Surfaces ◽  
Machining Characteristics

Diamond-point turning is an efficient technique for machining low-density polystyrene foam, and the surface finish can be substantially improved by grinding. However, both diamond-point turning and grinding tend to tear and fracture cell walls and leave asperities formed by agglomerations of fragmented cell walls. Vibratoming is proving to be an excellent technique to form planar surfaces in polystyrene, and the machining characteristics of vibratoming and diamond-point turning are compared.Our work has demonstrated that proper evaluation of surface structures in low density polystyrene foam requires stereoscopic examinations; tilts of + and − 3 1/2 degrees were used for the stereo pairs. Coating does not seriously distort low-density polystyrene foam. Therefore, the specimens were gold-palladium coated and examined in a Hitachi S-800 FESEM at 5 kV.

Real Time Person Recognition and Attendance Marking Using Holistic Based Approach

2017 ◽  
Vol 7 (7) ◽  
pp. 302
Author(s):  
Reshma P ◽  
Muneer VK ◽  
Muhammed Ilyas P
Keyword(s):  
Face Recognition ◽  
Real Time ◽  
High Accuracy ◽  
Efficient Technique ◽  
Human Face ◽  
Traditional Methods ◽  
Person Recognition ◽  
The Face

Face recognition is a challenging task for the researches. It is very useful for personal verification and recognition and also it is very difficult to implement due to all different situation that a human face can be found. This system makes use of the face recognition approach for the computerized attendance marking of students or employees in the room environment without lectures intervention or the employee. This system is very efficient and requires very less maintenance compared to the traditional methods. Among existing methods PCA is the most efficient technique. In this project Holistic based approach is adapted. The system is implemented using MATLAB and provides high accuracy.

IP traceback with matrix edge sampling

2012 ◽  
Vol 29 (5) ◽  
pp. 399-404
Author(s):  
Qiao YAN ◽  
Tu-wen NING
Keyword(s):  
Ip Traceback ◽  
Edge Sampling

A NOVEL AND EFFICIENT TECHNIQUE FOR PREVENTION OF XSS ATTACKS USING KNAPSACK BASED CRYPTOGRAPHY

2020 ◽  
Vol 9 (7) ◽  
pp. 4513-4521
Author(s):  
D. Dembla ◽  
Y. Chaba ◽  
K. Yadav ◽  
M. Chaba ◽  
A. Kumar
Keyword(s):  
Efficient Technique

Tributary Mapping Multiplexing an Efficient Technique for High Speed Fiber Optic Communication

2018 ◽  
Vol 6 (2) ◽  
Author(s):  
Usman Illahi ◽  
Javed Iqbal ◽  
Muhammad Ismail Sulaiman ◽  
Muhammad Alam ◽  
Mazliham Mohd Su'ud
Keyword(s):  
Spectral Efficiency ◽  
High Speed ◽  
Fiber Optic ◽  
Single Channel ◽  
Efficient Technique ◽  
High Dispersion ◽  
Optical Filtering ◽  
Fiber Optic Communication ◽  
Optic Communication ◽  
Dispersion Tolerance

<p>A novel technique of multiplexing called Tributary Mapping Multiplexing (TMM) is<br />applied to a single channel wavelength division multiplexing system and performance is monitored on the basis of simulation results. To elaborate the performance of TMM in this paper, a 4-User TMM system over single wavelength channel is demonstrated. TMM showed significant tolerance against narrow optical filtering as compared to that of conventional TDM at the rate of 40 Gbit/s. The above calculations are made by optical filter bandwidth and dispersion tolerance that was allowed at minimum. The spectral efficiency achieved by this TMM was 1 b/s/Hz and it was executed by using transmitters and receivers of 10 Gbit/s without polarized multiplexing. The high spectral efficiency, high dispersion tolerance and tolerance against strong optical filtering makes TMM an efficient technique for High<br />Speed Fiber Optic Communication.</p>

Cascade FinFET Direct Coupled Amplifier with Power Efficient Technique

2021 ◽  
Author(s):  
Shreya Shree ◽  
Shweta Bharti ◽  
Chameli Reang ◽  
Aditya Pratyush ◽  
Pooja Joshi
Keyword(s):  
Efficient Technique ◽  
Power Efficient

scholarly journals Kinematic analysis of two scapholunate ligament reconstruction techniques

2021 ◽  
Vol 29 (2) ◽  
pp. 230949902110258
Author(s):  
Seungbum Chae ◽  
Junho Nam ◽  
Il-Jung Park ◽  
Steven S. Shin ◽  
Michelle H. McGarry ◽  
...  
Keyword(s):  
Kinematic Analysis ◽  
Clinical Relevance ◽  
Ligament Reconstruction ◽  
Operative Time ◽  
Efficient Technique ◽  
Scapholunate Ligament ◽  
Interosseous Ligament ◽  
Flexion Extension

Purpose: This study compares the kinematic changes after the procedures for scapholunate interosseous ligament (SLIL) reconstruction—the modified Brunelli technique (MBT) and Mark Henry’s technique (MHT). Methods: Ten cadaveric wrists were used. The scapholunate (SL) interval and angle and radiolunate (RL) angle were recorded using the MicroScribe system. The SL interval was measured by dividing the volar and dorsal portions. Four motions of the wrist were performed—neutral, flexion, extension, and clenched fist (CF) positions—and compared among five conditions: (1) intact wrist, (2) volar SLIL resection, (3) whole SLIL resection, (4) MBT reconstruction, and (5) MHT reconstruction. Results: Under the whole SLIL resection condition, the dorsal SL intervals were widened in all positions. In all positions, the dorsal SL intervals were restored after MBT and MHT. The volar SL interval widened in the extension position after volar SLIL resection. The volar SL interval was not restored in the extension position after MBT and MHT. The SL angle increased in the neutral and CF positions under the whole SLIL resection condition. The SL angle was not restored in the neutral and CF positions after MBT and MHT. The RL angle increased in the neutral and CF positions under the whole SLIL resection condition. The RL angle was not restored in the neutral and CF positions after MBT and MHT. Conclusion: The MBT and MHT may restore the dorsal SL interval. No significant differences in restoration of the SL interval between MBT and MHT were found in the cadaveric models. Clinical relevance: No significant differences between MBT and MHT were found in the cadaveric models for SLIL reconstruction. When considering the complications due to volar incision and additional procedures in MHT, MBT may be a more efficient technique in terms of operative time and injury of the anterior structures during surgery, but further research is needed.

Sign in / Sign up

Export Citation Format

Share Document