Multi-attribute Hashing of Wireless Data for Content-Based Queries

2005 ◽  
pp. 143-153
Author(s):  
Yon Dohn Chung ◽  
Ji Yeon Lee
Keyword(s):  
Wireless Data

Modeling of Contact Patch in Dual-Chamber Pneumatic Tires

2018 ◽  
Vol 46 (2) ◽  
pp. 78-92 ◽  
Author(s):  
A. I. Kubba ◽  
G. J. Hall ◽  
S. Varghese ◽  
O. A. Olatunbosun ◽  
C. J. Anthony
Keyword(s):  
Strain Sensors ◽  
Surface Strain ◽  
Wireless Data ◽  
Data Logger ◽  
Dual Chamber ◽  
Piezoelectric Polymer ◽  
Pure Rolling ◽  
Piezoelectric Elements ◽  
Strain Data ◽  
Deformation Patterns

ABSTRACT This study presents an investigation of the inner tire surface strain measurement by using piezoelectric polymer transducers adhered on the inner liner of the tire, acting as strain sensors in both conventional and dual-chamber tires. The piezoelectric elements generate electrical charges when strain is applied. The inner liner tire strain can be found from the generated charge. A wireless data logger was employed to measure and transmit the measured signals from the piezoelectric elements to a PC to store and display the readout signals in real time. The strain data can be used as a monitoring system to recognize tire-loading conditions (e.g., traction, braking, and cornering) in smart tire technology. Finite element simulations, using ABAQUS, were employed to estimate tire deformation patterns in both conventional and dual-chamber tires for pure rolling and steady-state cornering conditions for different inflation pressures to simulate on-road and off-road riding tire performances and to compare with the experimental results obtained from both the piezoelectric transducers and tire test rig.

Diagnostic System of Gravitational Solid Flow Based on Weight and Accelerometer Signal Analysis Using Wireless Data Transmission Technology

2012 ◽  
Vol 17 (4) ◽  
pp. 319-326 ◽  
Author(s):  
Zbigniew Chaniecki ◽  
Krzysztof Grudzień ◽  
Tomasz Jaworski ◽  
Grzegorz Rybak ◽  
Andrzej Romanowski ◽  
...  
Keyword(s):  
Signal Analysis ◽  
Scale Up ◽  
Three Dimensional ◽  
Diagnostic System ◽  
Wireless Data ◽  
Stick Slip ◽  
Wireless Data Transmission ◽  
Accelerometer Signal ◽  
Flow Investigation ◽  
Material Information

Abstract The paper presents results of the scale-up silo flow investigation in based on accelerometer signal analysis and Wi-Fi transmission, performed in distributed laboratory environment. Prepared, by the authors, a set of 8 accelerometers allows to measure a three-dimensional acceleration vector. The accelerometers were located outside silo, on its perimeter. The accelerometers signal changes allowed to analyze dynamic behavior of solid (vibrations/pulsations) at silo wall during discharging process. These dynamic effects are caused by stick-slip friction between the wall and the granular material. Information about the material pulsations and vibrations is crucial for monitoring the interaction between silo construction and particle during flow. Additionally such spatial position of accelerometers sensor allowed to collect information about nonsymmetrical flow inside silo.

Design of automatic recharging system of robot based on RFID radio frequency technology

2020 ◽  
Vol 13 ◽  
Author(s):  
Zheng Xiao
Keyword(s):  
Mobile Robot ◽  
Radio Frequency ◽  
Engineering Application ◽  
Data Communication ◽  
Computer Application ◽  
Wireless Data ◽  
Robot System ◽  
Communication Module ◽  
Upper Computer ◽  
Better Than

Background: In order to study the interference of wired transmission mode on robot motion, a mobile robot attitude calculation and debugging system based on radio frequency (RF) technology is proposed. Methods: Microcontroller STM32 has been used as the control core for the attitude information of the robot by using MEMS gyroscope and accelerometer. The optimal attitude Angle of the robot is calculated through nRF24L01 which is the core of the wireless communication module, attitude acquisition module and wireless data communication upper computer application platform. Results: The results shows that the positioning accuracy is better than±5mm. Conclusion: The experimental results show that the proposed attitude solving and debugging system of mobile robot based on RF technology has better reliability and real-time performance. The propped model is convenient for debugging of mobile robot system and has certain engineering application value.

scholarly journals UAV-Enabled Covert Wireless Data Collection

2021 ◽  
pp. 1-1
Author(s):  
Xiaobo Zhou ◽  
Shihao Yan ◽  
Feng Shu ◽  
Riqing Chen ◽  
Jun Li
Keyword(s):  
Data Collection ◽  
Wireless Data ◽  
Wireless Data Collection
Sign in / Sign up

Export Citation Format

Share Document