scholarly journals Experimental Validation of a 3D Dynamic Finite-Element Model of a Total Knee Replacement

2005 ◽  
pp. 917-924 ◽  
Author(s):  
Joel L. Lanovaz ◽  
Randy E. Ellis
Keyword(s):  
Finite Element ◽  
Total Knee Replacement ◽  
Finite Element Model ◽  
Knee Replacement ◽  
Experimental Validation ◽  
Element Model ◽  
Dynamic Finite Element ◽  
Total Knee

A finite element model for evaluation of tibial prosthesis-bone interface in total knee replacement

1992 ◽  
Vol 25 (12) ◽  
pp. 1413-1424 ◽  
Author(s):  
R.L. Rakotomanana ◽  
P.F. Leyvraz ◽  
A. Curnier ◽  
J.H. Heegaard ◽  
P.J. Rubin
Keyword(s):  
Finite Element ◽  
Total Knee Replacement ◽  
Finite Element Model ◽  
Knee Replacement ◽  
Element Model ◽  
Bone Interface ◽  
Total Knee

scholarly journals Total Knee Replacement: Subject-Specific Modeling, Finite Element Analysis, and Evaluation of Dynamic Activities

2021 ◽  
Vol 9 ◽  
Author(s):  
Iliana Loi ◽  
Dimitar Stanev ◽  
Konstantinos Moustakas
Keyword(s):  
Finite Element ◽  
Total Knee Replacement ◽  
Finite Element Model ◽  
Knee Replacement ◽  
Element Model ◽  
Grand Challenge ◽  
Data Set ◽  
Subject Specific ◽  
Total Knee ◽  
Contact Pressures

This study presents a semi-automatic framework to create subject-specific total knee replacement finite element models, which can be used to analyze locomotion patterns and evaluate knee dynamics. In recent years, much scientific attention was attracted to pre-clinical optimization of customized total knee replacement operations through computational modeling to minimize post-operational adverse effects. However, the time-consuming and laborious process of developing a subject-specific finite element model poses an obstacle to the latter. One of this work's main goals is to automate the finite element model development process, which speeds up the proposed framework and makes it viable for practical applications. This pipeline's reliability was ratified by developing and validating a subject-specific total knee replacement model based on the 6th SimTK Grand Challenge data set. The model was validated by analyzing contact pressures on the tibial insert in relation to the patient's gait and analysis of tibial contact forces, which were found to be in accordance with the ones provided by the Grand Challenge data set. Subsequently, a sensitivity analysis was carried out to assess the influence of modeling choices on tibial insert's contact pressures and determine possible uncertainties on the models produced by the framework. Parameters, such as the position of ligament origin points, ligament stiffness, reference strain, and implant-bone alignment were used for the sensitivity study. Notably, it was found that changes in the alignment of the femoral component in reference to the knee bones significantly affect the load distribution at the tibiofemoral joint, with an increase of 206.48% to be observed at contact pressures during 5° internal rotation. Overall, the models produced by this pipeline can be further used to optimize and personalize surgery by evaluating the best surgical parameters in a simulated manner before the actual surgery.

scholarly journals Using Musculoskeletal Models to Estimate in vivo Total Knee Replacement Kinematics and Loads: Effect of Differences Between Models

2021 ◽  
Vol 9 ◽  
Author(s):  
Cristina Curreli ◽  
Francesca Di Puccio ◽  
Giorgio Davico ◽  
Luca Modenese ◽  
Marco Viceconti
Keyword(s):  
Finite Element ◽  
Knee Joint ◽  
Total Knee Replacement ◽  
Finite Element Model ◽  
Knee Replacement ◽  
Element Model ◽  
Assessment Process ◽  
Grand Challenge ◽  
Total Knee

Total knee replacement (TKR) is one of the most performed orthopedic surgeries to treat knee joint diseases in the elderly population. Although the survivorship of knee implants may extend beyond two decades, the poor outcome rate remains considerable. A recent computational approach used to better understand failure modes and improve TKR outcomes is based on the combination of musculoskeletal (MSK) and finite element models. This combined multiscale modeling approach is a promising strategy in the field of computational biomechanics; however, some critical aspects need to be investigated. In particular, the identification and quantification of the uncertainties related to the boundary conditions used as inputs to the finite element model due to a different definition of the MSK model are crucial. Therefore, the aim of this study is to investigate this problem, which is relevant for the model credibility assessment process. Three different generic MSK models available in the OpenSim platform were used to simulate gait, based on the experimental data from the fifth edition of the “Grand Challenge Competitions to Predict in vivo Knee Loads.” The outputs of the MSK analyses were compared in terms of relative kinematics of the knee implant components and joint reaction (JR) forces and moments acting on the tibial insert. Additionally, the estimated knee JRs were compared with those measured by the instrumented knee implant so that the “global goodness of fit” was quantified for each model. Our results indicated that the different kinematic definitions of the knee joint and the muscle model implemented in the different MSK models influenced both the motion and the load history of the artificial joint. This study demonstrates the importance of examining the influence of the model assumptions on the output results and represents the first step for future studies that will investigate how the uncertainties in the MSK models propagate on disease-specific finite element model results.

scholarly journals Finite element evaluation of the newest ISO testing standard for polyethylene total knee replacement liners

2018 ◽  
Vol 232 (6) ◽  
pp. 545-552 ◽  
Author(s):  
Steven P Mell ◽  
Spencer Fullam ◽  
Markus A Wimmer ◽  
Hannah J Lundberg
Keyword(s):  
Finite Element ◽  
Total Knee Replacement ◽  
Knee Replacement ◽  
External Rotation ◽  
Articular Surface ◽  
Element Model ◽  
International Standards ◽  
Wear Testing ◽  
Contact Conditions ◽  
Total Knee

Current treatment for end-stage osteoarthritis is total knee replacement. Given that the number of total knee replacement surgeries is expected to approach 3.48 million by 2030, understanding long-term failure is important. One of the preclinical tests for total knee replacements is carried out using mechanical wear testing under generic walking conditions. Used for this purpose is the International Standards Organization’s generic walking profile. Recently this standard was updated by reversing the direction of anterior/posterior translation and internal/external rotation. The effects of this change have not been investigated, and therefore, it is unknown if comparisons between wear tests utilizing the old and new version of the standard are valid. In this study, we used a finite element model along with a frictional energy–based wear model to compare the kinematic inputs, contact conditions, and wear from the older and newer versions of the ISO standard. Simulator-tested components were used to validate the computational model. We found that there were no visible similarities in the contact conditions between the old and new versions of the standard. The new version of the standard had a lower wear rate but covered a larger portion of the articular surface. Locations of wear also varied considerably. The results of the study suggest that major differences between the old and new standard exist, and therefore, historical wear results should be compared with caution to newly obtained results.

The Effect of Micro Grooving on Goat Total Knee Replacement: A Finite Element Study

2021 ◽  
Author(s):  
Morshed Khandaker ◽  
Onur Can Kalay ◽  
Fatih Karpat ◽  
Amgad Haleem ◽  
Wendy Williams ◽  
...  
Keyword(s):  
Finite Element ◽  
Total Knee Replacement ◽  
Knee Replacement ◽  
Finite Element Study ◽  
Micro Grooving ◽  
Total Knee ◽  
Element Study

Development of a Tibial Slider to Evaluate and Validate a Finite Element Model for Friction in Total Knee Implants

2000 ◽  
Author(s):  
Michael D. Nowak ◽  
Kenneth Shaw ◽  
Courtland Lewis
Keyword(s):  
United States ◽  
Finite Element ◽  
Knee Replacement ◽  
Severe Pain ◽  
Element Model ◽  
The United States ◽  
Loss Of Function ◽  
Articular Surfaces ◽  
Joint Disorder ◽  
Total Knee

Abstract More than 200,000 people in the United States annually undergo knee replacement as a means of diminishing pain and stiffness and restoring mobility, and the number is expected to increase with further advancements in joint replacement procedures [Duke, 1999]. Total knee replacement is performed on people with severe degenerative joint disorder such as osteoarthritis in which the articular surfaces of the knee deteriorate, leading to severe pain, limitation or loss of function and/or deformity of the joint.

Sign in / Sign up

Export Citation Format

Share Document