DETERMINATION OF NATURAL FREQUENCIES AND STABILITY REGIONS OF AXIALLY MOVING BEAMS USING ARTIFICIAL NEURAL NETWORKS METHOD

2002 ◽  
Vol 252 (4) ◽  
pp. 782-789 ◽  
Author(s):  
E. ÖZKAYA ◽  
H.R. ÖZ
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Natural Frequencies ◽  
Stability Regions ◽  
Axially Moving Beams ◽  
Artificial Neural ◽  
Axially Moving

The Approximate Location of Damage through the Analysis of Natural Frequencies with Artificial Neural Networks

1995 ◽  
Vol 209 (2) ◽  
pp. 117-123 ◽  
Author(s):  
P C Kaminski
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Natural Frequencies ◽  
Structural Members ◽  
Non Destructive Testing ◽  
Destructive Testing ◽  
Approximate Location ◽  
Artificial Neural ◽  
Non Destructive

An effective and reliable damage assessment methodology is a valuable tool for the timely determination of damage and the deterioration stage of structural members as well as for non-destructive testing (NDT). In this work artificial neural networks are used to identify the approximate location of damage through the analysis of changes in the natural frequencies. At first, a methodology for the use of artificial neural networks for this purpose is described. Different ways of pre-processing the data are discussed. The proposed approach is illustrated through the simulation of a free-free beam with a crack whose natural frequencies were obtained experimentally.

Determination of application volume for coffee plantations using artificial neural networks and remote sensing

2021 ◽  
Vol 184 ◽  
pp. 106096
Author(s):  
Mailson Freire de Oliveira ◽  
Adão Felipe dos Santos ◽  
Elizabeth Haruna Kazama ◽  
Glauco de Souza Rolim ◽  
Rouverson Pereira da Silva
Keyword(s):  
Remote Sensing ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Coffee Plantations ◽  
Artificial Neural ◽  
Application Volume

scholarly journals Non-Destructive Micromagnetic Determination of Hardness and Case Hardening Depth Using Linear Regression Analysis and Artificial Neural Networks

Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 18
Author(s):  
Rahel Jedamski ◽  
Jérémy Epp
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Regression Analysis ◽  
Artificial Neural Networks ◽  
Linear Regression ◽  
Linear Regression Analysis ◽  
Case Hardening ◽  
Artificial Neural ◽  
Non Destructive

Non-destructive determination of workpiece properties after heat treatment is of great interest in the context of quality control in production but also for prevention of damage in subsequent grinding process. Micromagnetic methods offer good possibilities, but must first be calibrated with reference analyses on known states. This work compares the accuracy and reliability of different calibration methods for non-destructive evaluation of carburizing depth and surface hardness of carburized steel. Linear regression analysis is used in comparison with new methods based on artificial neural networks. The comparison shows a slight advantage of neural network method and potential for further optimization of both approaches. The quality of the results can be influenced, among others, by the number of teaching steps for the neural network, whereas more teaching steps does not always lead to an improvement of accuracy for conditions not included in the initial calibration.

scholarly journals The use of classical methods and neural networks in deformation studies of hydrotechnical objects

2020 ◽  
Vol 12 (1) ◽  
pp. 718-725
Author(s):  
Maria Mrówczyńska ◽  
Jacek Sztubecki ◽  
Małgorzata Sztubecka ◽  
Izabela Skrzypczak
Keyword(s):  
Neural Networks ◽  
Artificial Neural Networks ◽  
Cylinder Surface ◽  
Building Structures ◽  
Steel Cylinder ◽  
Factors Affecting ◽  
Initial Stage ◽  
Artificial Neural ◽  
Set Of Points

Abstract Objects’ measurements often boil down to the determination of changes due to external factors affecting on their structure. The estimation of changes in a tested object, in addition to proper measuring equipment, requires the use of appropriate measuring methods and experimental data result processing methods. This study presents a statement of results of geometrical measurements of a steel cylinder that constitutes the main structural component of the historical weir Czersko Polskie in Bydgoszcz. In the initial stage, the estimation of reliable changes taking place in the cylinder structure involved the selection of measuring points essential for mapping its geometry. Due to the continuous operation of the weir, the points covered only about one-third of the cylinder area. The set of points allowed us to determine the position of the cylinder axis as well as skews and deformations of the cylinder surface. In the next stage, the use of methods based on artificial neural networks allowed us to predict the changes in the tested object. Artificial neural networks have proved to be useful in determining displacements of building structures, particularly hydro-technical objects. The above-mentioned methods supplement classical measurements that create the opportunity for carrying out additional analyses of changes in a spatial position of such structures. The purpose of the tests is to confirm the suitability of artificial neural networks for predicting displacements of building structures, particularly hydro-technical objects.

Sign in / Sign up

Export Citation Format

Share Document