A Novel and Simple Method for the Prediction of Corrosion Inhibition Efficiency without Using Complex Computer Codes

2017 ◽  
Vol 643 (24) ◽  
pp. 2149-2157 ◽  
Author(s):  
Zeinab Shirazi ◽  
Mohammad Hossein Keshavarz ◽  
Karim Esmaeilpour ◽  
Tahereh Pakniya
Keyword(s):  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Simple Method ◽  
Computer Codes ◽  
Corrosion Inhibition Efficiency ◽  
Complex Computer

Adsorption and corrosion inhibition characteristics of two medicinal molecules

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Hydrochloric Acid ◽  
Corrosion Rate ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Half Life ◽  
Thermodynamic Data ◽  
Inhibition Efficiency ◽  
Gravimetric Method ◽  
Corrosive Environment ◽  
Corrosion Inhibition Efficiency

The corrosion inhibition characteristics of two medicinal molecules phenylalanine and rutin on mild steel in 1.0M Hydrochloric acid were evaluated using gravimetric method. Corrosion inhibition efficiency of 83.78 and 90.40 % was obtained respectively after seven days. However, phenylalanine showed weak accumulative higher corrosion inhibition efficiency. The presence of both molecules in the corrosive environment reduced the corrosion rate constant and increased the material half-life. Thermodynamic data calculated suggests a spontaneous adsorption of the molecules on the mild steel’s surface.

scholarly journals A Comparative Study on the Corrosion Inhibition of Mild Steel and Aluminium by Synthesized Inhibitors in Organic Acidic Medium

2020 ◽  
pp. 41-51
Author(s):  
Lalita Saini ◽  
R. K. Upadhyay
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Mild Steel ◽  
Corrosion Inhibition ◽  
Acidic Medium ◽  
Trichloroacetic Acid ◽  
Inhibition Efficiency ◽  
Corrosion Inhibition Efficiency ◽  
Scanning Electron Microscope Method ◽  
Scanning Electron

Mass loss and Scanning Electron Microscope method (SEM) have been used to study the corrosion inhibition efficiency on mild steel and aluminium using synthesized inhibitors i.e. N-Benzylidene aniline (CI1) and N-Benzylidene 4-methylaniline (CI2) in Trichloroacetic acid (TCAA). Study reveals that both mild steel and aluminium are prone to corrosion in organic acid like TCAA. Out of these two metals, aluminium is more vigorously corroded by the TCAA in comparison to mild steel in same conditions and synthesized inhibitors CI1 and CI2 are almost same effective for mild steel and aluminium.

scholarly journals Effect of CO2 Partial Pressure on the Corrosion Inhibition of N80 Carbon Steel by Gum Arabic in a CO2-Water Saline Environment for Shale Oil and Gas Industry

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4245
Author(s):  
Gaetano Palumbo ◽  
Kamila Kollbek ◽  
Roma Wirecka ◽  
Andrzej Bernasik ◽  
Marcin Górny
Keyword(s):  
Carbon Steel ◽  
Partial Pressure ◽  
Corrosion Inhibition ◽  
Photoelectron Spectroscopy ◽  
Inhibition Efficiency ◽  
Gum Arabic ◽  
Saline Environment ◽  
X Ray ◽  
Co2 Partial Pressure ◽  
Corrosion Inhibition Efficiency

The effect of CO2 partial pressure on the corrosion inhibition efficiency of gum arabic (GA) on the N80 carbon steel pipeline in a CO2-water saline environment was studied by using gravimetric and electrochemical measurements at different CO2 partial pressures (e.g., PCO2 = 1, 20 and 40 bar) and temperatures (e.g., 25 and 60 °C). The results showed that the inhibitor efficiency increased with an increase in inhibitor concentration and CO2 partial pressure. The corrosion inhibition efficiency was found to be 84.53% and 75.41% after 24 and 168 h of immersion at PCO2 = 40 bar, respectively. The surface was further evaluated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), grazing incidence X-ray diffraction (GIXRD), and X-ray photoelectron spectroscopy (XPS) measurements. The SEM-EDS and GIXRD measurements reveal that the surface of the metal was found to be strongly affected by the presence of the inhibitor and CO2 partial pressure. In the presence of GA, the protective layer on the metal surface becomes more compact with increasing the CO2 partial pressure. The XPS measurements provided direct evidence of the adsorption of GA molecules on the carbon steel surface and corroborated the gravimetric results.

Sign in / Sign up

Export Citation Format

Share Document