Numerical study of fully developed turbulent flow within and above a dense forest

Wind Energy ◽  
2008 ◽  
Vol 11 (5) ◽  
pp. 503-515 ◽  
Author(s):  
Benoit Dalpé ◽  
Christian Masson
Keyword(s):  
Turbulent Flow ◽  
Numerical Study ◽  
Dense Forest ◽  
Fully Developed Turbulent Flow

scholarly journals Numerical Study of Turbulent Secondary Flows in Curved Ducts

1990 ◽  
Vol 112 (2) ◽  
pp. 205-211 ◽  
Author(s):  
N. Hur ◽  
S. Thangam ◽  
C. G. Speziale
Keyword(s):  
Experimental Data ◽  
Turbulent Flow ◽  
Secondary Flow ◽  
Cross Section ◽  
Numerical Study ◽  
Secondary Flows ◽  
Fully Developed Turbulent Flow ◽  
Volume Method ◽  
Curved Ducts ◽  
Good Agreement

The pressure driven, fully developed turbulent flow of an incompressible viscous fluid in curved ducts of square cross-section is studied numerically by making use of a finite volume method. A nonlinear K -1 model is used to represent the turbulence. The results for both straight and curved ducts are presented. For the case of fully developed turbulent flow in straight ducts, the secondary flow is characterized by an eight-vortex structure for which the computed flowfield is shown to be in good agreement with available experimental data. The introduction of moderate curvature is shown to cause a substantial increase in the strength of the secondary flow and to change the secondary flow pattern to either a double-vortex or a four-vortex configuration.

scholarly journals Fully developed turbulent flow in a square duct with a rough wall.

1987 ◽  
Vol 53 (492) ◽  
pp. 2370-2376 ◽  
Author(s):  
Hideomi FUJITA ◽  
Hajime YOKOSAWA ◽  
Masafumi HIROTA ◽  
Satoru NISHIGAKI
Keyword(s):  
Turbulent Flow ◽  
Rough Wall ◽  
Square Duct ◽  
Fully Developed Turbulent Flow

A Numerical Study of Heat Transfer and Flow Structure in Channels With Miniature V Rib-Dimple Hybrid Structure on One Wall

2018 ◽  
Author(s):  
Peng Zhang ◽  
Yu Rao ◽  
Yanlin Li
Keyword(s):  
Heat Transfer ◽  
Turbulent Flow ◽  
Numerical Simulations ◽  
Numerical Study ◽  
Reynolds Numbers ◽  
Hybrid Structure ◽  
Transfer Enhancement ◽  
Nusselt Numbers ◽  
Flow And Heat Transfer ◽  
Flow Mixing

This paper presents a numerical study on turbulent flow and heat transfer in the channels with a novel hybrid cooling structure with miniature V-shaped ribs and dimples on one wall. The heat transfer characteristics, pressure loss and turbulent flow structures in the channels with the rib-dimples with three different rib heights of 0.6 mm, 1.0 mm and 1.5 mm are obtained for the Reynolds numbers ranging from 18,700 to 60,000 by numerical simulations, which are also compared with counterpart of a pure dimpled and pure V ribbed channel. The results show that the overall Nusselt numbers of the V rib-dimple channel with the rib height of 1.5 mm is up to 70% higher than that of the channels with pure dimples. The numerical simulations show that the arrangement of the miniature V rib upstream each dimple induces complex secondary flow near the wall and generates downwashing vortices, which intensifies the flow mixing and turbulent kinetic energy in the dimple, resulting in significant improvement in heat transfer enhancement and uniformness.

Computational analysis of turbulent flow through an eccentric annulus under different temperature conditions

2018 ◽  
Vol 28 (9) ◽  
pp. 2189-2207 ◽  
Author(s):  
Erman Ulker ◽  
Sıla Ovgu Korkut ◽  
Mehmet Sorgun
Keyword(s):  
Turbulent Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Content Type ◽  
Non Linear ◽  
Fully Developed Turbulent Flow ◽  
Effects Of Temperature ◽  
Eccentric Annuli ◽  
Pipe Rotation

Purpose The purpose of this paper is to solve Navier–Stokes equations including the effects of temperature and inner pipe rotation for fully developed turbulent flow in eccentric annuli by using finite difference scheme with fixing non-linear terms. Design/methodology/approach A mathematical model is proposed for fully developed turbulent flow including the effects of temperature and inner pipe rotation in eccentric annuli. Obtained equation is solved numerically via central difference approximation. In this process, the non-linear term is frozen. In so doing, the non-linear equation can be considered as a linear one. Findings The convergence analysis is studied before using the method to the proposed momentum equation. It reflects that the method approaches to the exact solution of the equation. The numerical solution of the mathematical model shows that pressure gradient can be predicted with a good accuracy when it is compared with experimental data collected from experiments conducted at Izmir Katip Celebi University Flow Loop. Originality/value The originality of this work is that Navier–Stokes equations including temperature and inner pipe rotation effects for fully developed turbulent flow in eccentric annuli are solved numerically by a finite difference method with frozen non-linear terms.

Sign in / Sign up

Export Citation Format

Share Document