scholarly journals Experimentally validated three‐dimensional computational aerodynamics of wind turbine blade sections featuring leading edge erosion cavities

Wind Energy ◽  
2021 ◽  
Author(s):  
Michele Sergio Campobasso ◽  
Alessio Castorrini ◽  
Lorenzo Cappugi ◽  
Aldo Bonfiglioli
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Three Dimensional ◽  
Leading Edge ◽  
Wind Turbine Blade ◽  
Computational Aerodynamics

Three-Dimensional and Rotational Aerodynamics on the NREL Phase VI Wind Turbine Blade

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Alvaro Gonzalez ◽  
Xabier Munduate
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Three Dimensional ◽  
Separated Flow ◽  
Leading Edge ◽  
Wind Turbine Blade ◽  
Trailing Edge ◽  
Rotating Blade ◽  
Nrel Phase Vi ◽  
Edge Separation

This work undertakes an aerodynamic analysis over the parked and the rotating NREL Phase VI wind turbine blade. The experimental sequences from NASA Ames wind tunnel selected for this study respond to the parked blade and the rotating configuration, both for the upwind, two-bladed wind turbine operating at nonyawed conditions. The objective is to bring some light into the nature of the flow field and especially the type of stall behavior observed when 2D aerofoil steady measurements are compared to the parked blade and the latter to the rotating one. From averaged pressure coefficients together with their standard deviation values, trailing and leading edge separated flow regions have been found, with the limitations of the repeatability of the flow encountered on the blade. Results for the parked blade show the progressive delay from tip to root of the trailing edge separation process, with respect to the 2D profile, and also reveal a local region of leading edge separated flow or bubble at the inner, 30% and 47% of the blade. For the rotating blade, results at inboard 30% and 47% stations show a dramatic suppression of the trailing edge separation, and the development of a leading edge separation structure connected with the extra lift.

Experimental investigation of the effect of active flow control on the wake of a wind turbine blade

2021 ◽  
pp. 095440622110089
Author(s):  
GholamHossein Maleki ◽  
Ali Reza Davari ◽  
Mohammad Reza Soltani
Keyword(s):  
Experimental Investigation ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Active Flow Control ◽  
Leading Edge ◽  
Wind Turbine Blade ◽  
Plasma Actuators ◽  
Plasma Actuation ◽  
Surface Pressure Distribution ◽  
Stall Angle

An extensive experimental investigation was conducted to study the effects of Dielectric Barrier Discharge (DBD), on the flow field of an airfoil at low Reynolds number. The DBD was mounted near the leading edge of a section of a wind turbine blade. It is believed that DBD can postpone the separation point on the airfoil by injecting momentum to the flow. The effects of steady actuations on the velocity profiles in the wake region have been investigated. The tests were performed at α = 4 to 36 degrees i.e. from low to deep stall angles of attack regions. Both surface pressure distribution and wake profile show remarkable improvement at high angles of attack, beyond the static stall angle of the airfoil when the plasma actuation was implemented. The drag calculated from the wake momentum deficit has further shown the favorable role of the plasma actuators to control the flow over the airfoil at incidences beyond the static stall angle of attack of this airfoil. The results demonstrated that DBD has been able to postpone the stall onset significantly. It has been observed that the best performance for the plasma actuation for this airfoil is in the deep stall angles of attack range. However, below and near the static stall angles of attack, plasma augmentation was pointed out to have a negligible improvement in the aerodynamic behavior.

Design and Analysis of Wind Turbine Blades: Winglet, Tubercle, and Slotted

2013 ◽  
Author(s):  
Alka Gupta ◽  
Abdulrahman Alsultan ◽  
R. S. Amano ◽  
Sourabh Kumar ◽  
Andrew D. Welsh
Keyword(s):  
Power Generation ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Alternative Energy ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Governing Factor

Energy is the heart of today’s civilization and the demand seems to be increasing with our growing population. Alternative energy solutions are the future of energy, whereas the fossil-based fuels are finite and deemed to become extinct. The design of the wind turbine blade is the main governing factor that affects power generation from the wind turbine. Different airfoils, angle of twist and blade dimensions are the parameters that control the efficiency of the wind turbine. This study is aimed at investigating the aerodynamic performance of the wind turbine blade. In the present paper, we discuss innovative blade designs using the NACA 4412 airfoil, comparing them with a straight swept blade. The wake region was measured in the lab with a straight blade. All the results with different designs of blades were compared for their performance. A complete three-dimensional computational analysis was carried out to compare the power generation in each case for different wind speeds. It was found from the numerical analysis that the slotted blade yielded the most power generation among the other blade designs.

Study on Wind Turbine Blade Design Method and Modeling Technology

2011 ◽  
Vol 88-89 ◽  
pp. 549-553
Author(s):  
Wen Xian Tang ◽  
Cheng Cheng ◽  
Yun Di Cai ◽  
Fei Wang
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Design Method ◽  
Three Dimensional ◽  
Design Procedure ◽  
Wind Turbine Blade ◽  
Solid Model ◽  
Blade Design ◽  
Modeling Technology ◽  
Turbine Blade Design

According to the design procedure of wind turbine blade, a design method that can make CAD software joint used was brought up. Wilson method was used to design and calculate the main data of blade. On this basis, the three-dimensional solid model of wind turbine blade could get by using and playing the function of different CAD software. This study provided a reference for the design of wind turbine blade and other similar complicated structures, which settles the basis for the further analysis of blade.

scholarly journals Virtual full-scale testing for investigating strength characteristics of a composite wind turbine blade

2020 ◽  
Author(s):  
Can Muyan ◽  
Demirkan Coker
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Mechanical Response ◽  
Leading Edge ◽  
Full Scale ◽  
Wind Turbine Blade ◽  
Combined Loading ◽  
Strength Analysis ◽  
Damage Development ◽  
Extreme Load

Abstract. Full-scale structural tests enable us to monitor mechanical response of the blades under various loading scenarios. Yet these tests must be accompanied with numerical simulations, so that the physical basis of the progressive damage development can be captured and interpreted correctly. Within the scope of this paper the previous work of the authors concerning the strength analysis of an existing 5-m GFRP wind turbine blade using Puck failure criteria is revisited. An important outcome of the previous study was that nonlinear Puck material model was found to be necessary for a more realistic simulation of failure mechanisms. In the current work, under extreme load cases internal flange at the leading edge, trailing edge of the blade are identified as the mainly damaged regions. Moreover, dominant failure mechanism is expected to be the de-bonding at the trailing and leading edges. When extreme load case is applied as a combination of edge-wise and flap-wise loading cases, less damage is observed compared to the pure flap-wise loading case. This damage evolution is attributed to the stiffer structural behavior of the blade under combined loading condition.

Computation of Aerodynamic Performance Deterioration of Wind Turbine Blade Due to Ice Accretion

2003 ◽  
Author(s):  
Kousuke Nushi ◽  
Shingo Kasai ◽  
Kazuyuki Toda ◽  
Makoto Yamamoto ◽  
Makoto Iida ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Leading Edge ◽  
Aerodynamic Performance ◽  
Wind Turbine Blade ◽  
Ice Accretion ◽  
Power Generator ◽  
Wind Power Generator ◽  
Performance Deterioration ◽  
Severe Deterioration

The attention for a wind power-generator has been attracted as one of the solutions for the environmental problems. When a wind turbine is operated in winter, supercooled water droplets impinge on the blade surface, and as the result ice accretes around the leading edge. It is well known that the occurrence of ice accretion on the wind turbine blade can lead to the severe deterioration of aerodynamic performance. However, the experiment is difficult, because it is not easy to create repeatedly the accretion conditions in a laboratory. Therefore, CFD is expected as a useful tool to predict and investigate the phenomena. In the present study, we develop the ice accretion code, and apply it to the MEL wind turbine blade. From the computational results, the shape of the ice-accreted blade and the deterioration of aerodynamic performance are numerically investigated.

Sign in / Sign up

Export Citation Format

Share Document