The impact of wind resource spatial variability on floating offshore wind farms finance

Wind Energy ◽  
2017 ◽  
Author(s):  
Fernando del Jesus ◽  
Raúl Guanche ◽  
Íñigo J. Losada
2018 ◽  
Vol 77 (3) ◽  
pp. 1238-1246 ◽  
Author(s):  
Jean-Philippe Pezy ◽  
Aurore Raoux ◽  
Jean-Claude Dauvin

Abstract The French government is planning the construction of offshore wind farms (OWF) in the next decade (around 2900 MW). Following the European Environmental Impact Assessment Directive 85/337/EEC, several studies have been undertaken to identify the environmental conditions and ecosystem functioning at selected sites prior to OWF construction. However, these studies are generally focused on the conservation of some species and there is no holistic approach for analysing the effects arising from OWF construction and operation. The objective of this article is to promote a sampling strategy to collect data on the different ecosystem compartments of the future Dieppe-Le Tréport (DLT) wind farm site, adopting an ecosystem approach, which could be applied to other OWFs for the implementation of a trophic network analysis. For that purpose, an Ecopath model is used here to derive indices from Ecological Network Analysis (ENA) to investigate the ecosystem structure and functioning. The results show that the ecosystem is most likely detritus-based, associated with a biomass dominated by bivalves, which could act as a dead end for a classic trophic food web since their consumption by top predators is low in comparison to their biomass. The systemic approach developed for DLT OWF site should be applied for other French and European installations of Offshore Wind Farm.


2021 ◽  
Author(s):  
Marcus Klose ◽  
Junkan Wang ◽  
Albert Ku

Abstract In the past, most of the offshore wind farms have been installed in European countries. In contrast to offshore wind projects in European waters, it became clear that the impact from earthquakes is expected to be one of the major design drivers for the wind turbines and their support structures in other areas of the world. This topic is of high importance in offshore markets in the Asian Pacific region like China, Taiwan, Japan, Korea as well as parts of the United States. So far, seismic design for wind turbines is not described in large details in existing wind energy standards while local as well as international offshore oil & gas standards do not consider the specifics of modern wind turbines. In 2019, DNV GL started a Joint Industry Project (JIP) called “ACE -Alleviating Cyclone and Earthquake challenges for wind farms”. Based on the project results, a Recommended Practice (RP) for seismic design of wind turbines and their support structures will be developed. It will supplement existing standards like DNVGL-ST-0126, DNVGL-ST-0437 and the IEC 61400 series. This paper addresses the area of seismic load calculation and the details of combining earthquake impact with other environmental loads. Different options of analysis, particularly time-domain simulations with integrated models or submodelling techniques using superelements will be presented. Seismic ground motions using a uniform profile or depth-varying input profile are discussed. Finally, the seismic load design return period is addressed.


Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3879 ◽  
Author(s):  
Ali Bidadfar ◽  
Oscar Saborío-Romano ◽  
Vladislav Akhmatov ◽  
Nicolaos A. Cutululis ◽  
Poul E. Sørensen

Offshore high-voltage DC (HVDC) grids are developing as a technically reliable and economical solution to transfer more offshore wind power to onshore power systems. It is also foreseen that the offshore HVDC grids pave the way for offshore wind participation in power systems’ balancing process through frequency support. The primary frequency control mechanism in an HVDC grid can be either centralized using communication links between HVDC terminals or decentralized by the simultaneous use of DC voltage and frequency droop controls. This paper investigates the impact of both types of primary frequency control of offshore HVDC grids on onshore power system dynamics. Parametric presentation of power systems’ electro-mechanical dynamics and HVDC controls is developed to analytically prove that the primary frequency control can improve the damping of interarea modes of onshore power systems. The key findings of the paper include showing that the simultaneous use of frequency and DC voltage droop controls on onshore converters results in an autonomous share of damping torque between onshore power systems even without any participation of offshore wind farms in the frequency control. It is also found that the resulting damping from the frequency control of offshore HVDC is not always reliable as it can be nullified by the power limits of HVDC converters or wind farms. Therefore, using power oscillation damping control in parallel with frequency control is suggested. The analytical findings are verified by simulations on a three-terminal offshore HVDC grid.


Author(s):  
Bernt J. Leira

Energy, fisheries and transport infrastructures are increasingly being established offshore. Facilities such as offshore wind farms may occupy large areas and compete with other users of the maritime space. Accordingly, offshore platforms that can combine many functions within the same infrastructure could offer significant benefits. This applies to economy, optimization of spatial planning and minimization of the impact on the environment. In the present paper, some proposed innovative designs for multi-use offshore platforms are described. The technical, economical and environmental feasibility of designing, installing, operating, servicing and maintaining such platforms are discussed. The relevant platforms under consideration are targeted towards ocean renewable energy (in particular offshore wind), aquaculture and related transport maritime services. Innovative designs for multi-use offshore platforms that intend to allow optimal coupling of the various activities and services are highlighted. Issues such as safe and efficient installation, operation, maintenance and monitoring are also briefly discussed in the paper.


2018 ◽  
Vol 51 ◽  
pp. 01004
Author(s):  
Alina Raileanu ◽  
Florin Onea ◽  
Liliana Rusu

The objective of the present work is to estimate the influence of several hybrid wind and wave farm configurations on the wave conditions reported in the vicinity of the Saint George coastal area, in the Romanian nearshore of the Black Sea. Based on the wave data coming from a climatological database (ERA20C) and also on in situ measurements, it was possible to identify the most relevant wave patterns, which will be further considered for assessment. The numerical simulations were carried out with the SWAN (Simulating Waves Nearshore) wave model, which may provide a comprehensive picture of the wave transformation in the presence of the marine farms. Although the impact of the wind farm is not visible from the spatial maps, from the analysis of the values corresponding to the reference points, it was noticed that a maximum variation of 2% may occur for several wave parameters.


Green ◽  
2013 ◽  
Vol 3 (1) ◽  
Author(s):  
Annette Westerhellweg ◽  
Beatriz Cañadillas ◽  
Friederike Kinder ◽  
Thomas Neumann

AbstractSince August 2009, the first German offshore wind farm ‘alpha ventus’ is operating close to the wind measurement platform FINO1. Within the research project RAVE-OWEA the wind flow conditions in ‘alpha ventus’ were assessed in detail, simulated with a CFD wake model and compared with the measurements. Wind data measured at FINO1 have been evaluated for wind speed reduction and turbulence increase in the wake. Additionally operational data were evaluated for the farm efficiency. The atmospheric stability has been evaluated by temperature measurements of air and water and the impact of atmospheric stability on the wind conditions in the wake has been assessed. As an application of CFD models the generation of power matrices is introduced. Power matrices can be used for the continual monitoring of the single wind turbines in the wind farm. A power matrix based on CFD simulations has been created for ‘alpha ventus’ and tested against the measured data.


2017 ◽  
Vol 11 (12) ◽  
pp. 1714-1718
Author(s):  
Laith Danoon ◽  
Waleed Al‐Mashhadani ◽  
Anthony Brown

2020 ◽  
Vol 10 (24) ◽  
pp. 8899
Author(s):  
Laura Serri ◽  
Lisa Colle ◽  
Bruno Vitali ◽  
Tullia Bonomi

At the end of 2019, 10.5 GW of wind capacity was installed in Italy, all onshore. The National Integrated Climate and Energy Plan sets a target of 18.4 GW of onshore wind capacity and 0.9 GW of offshore wind capacity by 2030. Significant exploitation of offshore wind resources in Italy is expected after 2030, using floating wind turbines, suitable for water depths greater than 50 m. This technology is at the demonstration phase at present. Results of a preliminary techno-economic assessment of floating wind plants in Italian marine areas in a medium (2030) and long-term (2060) scenario are presented. In 2030, a reference park with 10 MW wind turbines will be defined, and parametric costs, depending on distance from shore, were assessed. In 2060, possible wind resource variations due to climate change, and cost reductions due to large diffusion of the technology were considered in three case studies. The economic model used was the simple Levelized Cost of Energy (sLCoE). Different values of Weighted Average Cost of Capital (WACC) were considered too. The results show LCoEs comparable to the ones expected for the sector in 2030. In 2060, even in the more pessimistic scenario, wind resource decreases will be abundantly compensated by expected cost reductions.


Author(s):  
Rodolfo Bolaños ◽  
Lars Boye Hansen ◽  
Mikkel Lydholm Rasmussen ◽  
Maziar Golestani ◽  
Jesper Sandvig Mariegaard ◽  
...  

Offshore wind farms around the world are being developed with the objective of increasing the contribution of renewable energy to the global energy consumption. Bathymetric features at the wind farm sites have a strong influence on waves and currents, controlling the propagation and dissipation of flows during normal and extreme conditions. In this work we use a state-of-the-art cost-effective method for bathymetric mapping based on high resolution satellite images to characterize a coastal wind farm region and assess the added value of such data when performing wave modelling. The study area is characterized by the presence of offshore wind farms and a complex bathymetry that feature sand bars and channels. For this study, a satellite derived bathymetry (SDB) was produced using imagery from the Sentinel-2A satellite. The Sentinel-2a data allows for more detailed SDB retrieval than is available in the existing accessible bathymetric datasets. The data is then used in a spectral wave model (MIKE21SW) with different resolutions outlining the impact of large bedforms on surface waves, mainly due to wave breaking. The bathymetry data is also used in a phase-resolving model (MIKE3waveFM) where regular and irregular waves are simulated, outlining the impact of bedforms on individual wave dissipation. Discussion on the satellite derived bathymetry and wave models results are presented in this paper.


Resources ◽  
2015 ◽  
Vol 4 (1) ◽  
pp. 155-171 ◽  
Author(s):  
Daniel Drew ◽  
Dirk Cannon ◽  
David Brayshaw ◽  
Janet Barlow ◽  
Phil Coker

Sign in / Sign up

Export Citation Format

Share Document