Estimation of seismic demands of steel frames subjected to near-fault earthquakes having forward directivity and comparing with pushover analysis results

2012 ◽  
Vol 22 (13) ◽  
pp. 975-988 ◽  
Author(s):  
F. Soleimani Amiri ◽  
G. Ghodrati Amiri ◽  
H. Razeghi
Keyword(s):  
Pushover Analysis ◽  
Steel Frames ◽  
Seismic Demands ◽  
Near Fault ◽  
Forward Directivity ◽  
Near Fault Earthquakes

scholarly journals Effectiveness of modified pushover analysis procedure for the estimation of seismic demands of buildings subjected to near-fault ground motions having fling step

2013 ◽  
Vol 13 (6) ◽  
pp. 1579-1593 ◽  
Author(s):  
A. Mortezaei ◽  
H. R. Ronagh
Keyword(s):  
Ground Motions ◽  
Pushover Analysis ◽  
Time History ◽  
Building Structures ◽  
Seismic Demands ◽  
Near Fault ◽  
Load Pattern ◽  
Dynamic Time ◽  
Near Fault Earthquakes ◽  
Nonlinear Time History

Abstract. Near-fault ground motions with long-period pulses have been identified as being critical in the design of structures. These motions, which have caused severe damage in recent disastrous earthquakes, are characterized by a short-duration impulsive motion that transmits large amounts of energy into the structures at the beginning of the earthquake. In nearly all of the past near-fault earthquakes, significant higher mode contributions have been evident in building structures near the fault rupture, resulting in the migration of dynamic demands (i.e. drifts) from the lower to the upper stories. Due to this, the static nonlinear pushover analysis (which utilizes a load pattern proportional to the shape of the fundamental mode of vibration) may not produce accurate results when used in the analysis of structures subjected to near-fault ground motions. The objective of this paper is to improve the accuracy of the pushover method in these situations by introducing a new load pattern into the common pushover procedure. Several pushover analyses are performed for six existing reinforced concrete buildings that possess a variety of natural periods. Then, a comparison is made between the pushover analyses' results (with four new load patterns) and those of FEMA (Federal Emergency Management Agency)-356 with reference to nonlinear dynamic time-history analyses. The comparison shows that, generally, the proposed pushover method yields better results than all FEMA-356 pushover analysis procedures for all investigated response quantities and is a closer match to the nonlinear time-history responses. In general, the method is able to reproduce the essential response features providing a reasonable measure of the likely contribution of higher modes in all phases of the response.

Sensitivity analysis of the influence of ground motion intensity levels on the seismic behavior of steel frames in assessment of the target displacement considering near-fault effects

2020 ◽  
Vol 47 (4) ◽  
pp. 470-486
Author(s):  
Alireza Esfahanian ◽  
Ali Akbar Aghakouchak
Keyword(s):  
Ground Motions ◽  
Steel Frames ◽  
Time History ◽  
Time History Analysis ◽  
Nonlinear Time History Analysis ◽  
Seismic Demands ◽  
Near Fault ◽  
History Analysis ◽  
Nonlinear Time History ◽  
Far Fault

Nonlinear time-history analysis conducted as part of a performance-based seismic design approach often require that the ground motion records are selected and then scaled to a specified level of seismic intensity. In such analyses, besides an adequate structural model, a set of acceleration time-series is needed as the most realistic representation of the seismic action. In this paper, the effects of scaling procedure on seismic demands of steel frames are investigated. To this, two special steel moment-resisting frames with considerable higher mode effects, and two sets of ground motions, including near-fault and far-fault motions are considered. Moreover, three scaling procedures are introduced for performing nonlinear dynamic time-history analysis of structures. Among different demands, lateral roof displacement and interstory drift are selected as seismic demands. The height-wise distribution of demands shows that the inelastic seismic demands of the near-fault pulse-like ground motions differ considerably from those of far-fault ones. These results show that the story drifts are mostly larger for far-fault motions in the upper story levels in comparison to near-fault records and in the lower floors, the reverse is true. Thus, the scaling procedures directly affect the results of seismic demands and choosing different methods would result in varying responses. Moreover, a low-cost and fairly effective procedure is proposed to estimate the target displacement demands of buildings from response-spectrum analyses, considering near-fault effects. The precision of this method is verified by nonlinear time-history analysis results, as the benchmark solution, and acceptable improvements have been achieved.

SSI in steel frames subjected to near-fault earthquakes

2014 ◽  
Vol 66 ◽  
pp. 56-68 ◽  
Author(s):  
G. Minasidis ◽  
G.D. Hatzigeorgiou ◽  
D.E. Beskos
Keyword(s):  
Steel Frames ◽  
Near Fault ◽  
Near Fault Earthquakes

Effects of Fling Step and Forward Directivity on Seismic Response of Buildings

2006 ◽  
Vol 22 (2) ◽  
pp. 367-390 ◽  
Author(s):  
Erol Kalkan ◽  
Sashi K. Kunnath
Keyword(s):  
Seismic Response ◽  
Ground Motions ◽  
High Amplitude ◽  
Moment Frames ◽  
Steel Moment Frames ◽  
Damage Potential ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Far Fault

This paper investigates the consequences of well-known characteristics of near-fault ground motions on the seismic response of steel moment frames. Additionally, idealized pulses are utilized in a separate study to gain further insight into the effects of high-amplitude pulses on structural demands. Simple input pulses were also synthesized to simulate artificial fling-step effects in ground motions originally having forward directivity. Findings from the study reveal that median maximum demands and the dispersion in the peak values were higher for near-fault records than far-fault motions. The arrival of the velocity pulse in a near-fault record causes the structure to dissipate considerable input energy in relatively few plastic cycles, whereas cumulative effects from increased cyclic demands are more pronounced in far-fault records. For pulse-type input, the maximum demand is a function of the ratio of the pulse period to the fundamental period of the structure. Records with fling effects were found to excite systems primarily in their fundamental mode while waveforms with forward directivity in the absence of fling caused higher modes to be activated. It is concluded that the acceleration and velocity spectra, when examined collectively, can be utilized to reasonably assess the damage potential of near-fault records.

Comparison of steel frames with RWS and WFP beam-to-column connections through seismic fragility analysis

2020 ◽  
pp. 136943322097728
Author(s):  
Haoran Yu ◽  
Weibin Li
Keyword(s):  
Limit State ◽  
Pushover Analysis ◽  
Steel Frames ◽  
Fragility Analysis ◽  
Structural Safety ◽  
Seismic Fragility ◽  
Fe Modelling ◽  
Collapse Resistance ◽  
Seismic Collapse ◽  
Probabilistic Seismic Demand

Reduced web section (RWS) connections and welded flange plate (WFP) connections can both effectively improve the seismic performance of a structure by moving plastic hinges to a predetermined location away from the column face. In this paper, two kinds of steel frames—with RWS connections and WFP connections—as well as different frames with welded unreinforced flange connections were studied through seismic fragility analysis. The numerical simulation was conducted by using multiscale FE modelling. Based on the incremental dynamic analysis and pushover analysis methods, probabilistic seismic demand analysis and seismic capability analysis were carried out, respectively. Finally, combined with the above analysis results, probabilistic seismic fragility analysis was conducted on the frame models. The results showed that the RWS connection and WFP connection (without double plates) have little influence on reducing the maximum inter-storey drift ratio under earthquake action. RWS connections slightly reduce the seismic capability in non-collapse stages and improve the seismic collapse resistance of a structure, which exhibits good structural ductility. WFP connections can comprehensively improve the seismic capability of a structure, but the seismic collapse resistance is worse than that of RWS connections when the structure has a large number of storeys. The frame with WFP connections has a lower failure probability at every seismic limit state, while the frame with RWS connections sacrifices some of its structural safety in non-collapse stages to reduce the collapse probability.

Seismic demands of bare and base-isolated steel frames for real against simulated records of a past earthquake

2021 ◽  
pp. 1-16
Author(s):  
Volkan Ozsarac ◽  
Shaghayegh Karimzadeh ◽  
Aysegul Askan ◽  
Murat Altug Erberik
Keyword(s):  
Steel Frames ◽  
Seismic Demands

Influence of floor system on seismic behavior of RC buildings to forward directivity and fling-step in the near-fault region

Structures ◽  
2021 ◽  
Vol 30 ◽  
pp. 803-817
Author(s):  
Sayed Mahmoud ◽  
Ali Alqarni ◽  
Joseph Saliba ◽  
Amal H. Ibrahim ◽  
Magdy genidy ◽  
...  
Keyword(s):  
Seismic Behavior ◽  
Rc Buildings ◽  
Near Fault ◽  
Forward Directivity ◽  
Fling Step ◽  
Floor System ◽  
Fault Region
Sign in / Sign up

Export Citation Format

Share Document