Acceleration‐based effective damping ratio of tuned mass damper under seismic excitations

2021 ◽  
Author(s):  
Hui He ◽  
Ping Tan ◽  
Linfei Hao
Keyword(s):  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Seismic Excitations ◽  
Mass Damper

Determination of optimal parameters of the tuned mass damper to reduce the torsional vibration of the shaft by using the principle of minimum kinetic energy

2018 ◽  
Vol 233 (2) ◽  
pp. 327-335 ◽  
Author(s):  
Duy-Chinh Nguyen
Keyword(s):  
Kinetic Energy ◽  
Torsional Vibration ◽  
Damping Ratio ◽  
Vibration Reduction ◽  
Tuned Mass Damper ◽  
Optimal Parameters ◽  
Lagrangian Equations ◽  
Tuning Ratio ◽  
Mass Damper

In this paper, an analytical method is presented to determine the optimal parameters of the symmetric tuned mass damper, such as the ratio between natural frequency of tuned mass damper and shaft (tuning ratio) and the ratio of the viscous coefficient of tuned mass damper (damping ratio). The optimal parameters of tuned mass damper are applied to reduce the torsional vibration of the shaft based on consideration of the vibration duration and stability criterion. The dynamic equations of the shaft are provided via Lagrangian equations, and the optimal parameters of tuned mass damper are derived by using the principle of minimum kinetic energy. Analytical and numerical examples are implemented to verify the reliability of the proposed method. The analytical and numerical results indicate that the optimal parameters of tuned mass damper have significant effects in the torsional vibration reduction of the shaft.

scholarly journals Seismic Performance Analysis of a Connected Multitower Structure with FPS and Viscous Damper

2018 ◽  
Vol 2018 ◽  
pp. 1-19 ◽  
Author(s):  
Xiaohan Wu ◽  
Jun Wang ◽  
Jiangyong Zhou
Keyword(s):  
Seismic Behavior ◽  
Passive Control ◽  
Time History ◽  
Tuned Mass Damper ◽  
Seismic Excitations ◽  
History Analysis ◽  
Mass Damper ◽  
Tower Structure ◽  
Design Requirements ◽  
Friction Pendulum

A high four-tower structure is interconnected with a long sky corridor bridge on the top floor. To reduce the earthquake responses and member forces of the towers and sky corridor bridge, a passive control strategy with a friction pendulum tuned mass damper (FPTMD) was adopted. The sky corridor bridge was as the mass of FPTMD. The connection between the towers and the sky corridor bridge was designed as flexible links, where friction pendulum bearings (FPBs) and viscous dampers were installed. Elastoplastic time-history analysis was conducted by using Perform-3D model to look into its seismic behavior under intensive seismic excitation. The optimal design of the FPTMD with varying friction coefficients and radius of friction pendulum bearing (FPB) under seismic excitations was carried out, and the seismic behavior of the structure was also investigated at the same time.Results show that, for this four-tower connected structure, the friction pendulum tuned mass damper (FPTMD) has very well effect on seismic reduction. The structure can meet the seismic resistance design requirements.

scholarly journals Development of a Frequency-Adjustable Tuned Mass Damper (FATMD) for Structural Vibration Control

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Huaguo Gao ◽  
Congbao Wang ◽  
Chen Huang ◽  
Wenlong Shi ◽  
Linsheng Huo
Keyword(s):  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Vertical Vibration ◽  
Structural Vibration ◽  
Kinematic Equation ◽  
Pedestrian Bridge ◽  
Long Span ◽  
Mass Damper ◽  
Excitation Frequencies ◽  
Simple Assembly

The tuned mass damper (TMD) can be applied to suppress earthquake, wind, and pedestrian- and machine-induced vibration in factory buildings or large span structures. However, the traditional TMD with a fixed frequency will not be able to perform effectively against the frequency variations in multiple hazards. This paper proposed a frequency-adjustable tuned mass damper (FATMD) to solve this limitation of current TMD. The FATMD presented in this paper is composed of a simple assembly consisting of a supported beam with a mass, in which the frequency of the FATMD is changed by adjusting the span of the beam. The kinematic equation of a single degree of freedom (SDOF) structure installed with an FATMD is established to analyze the effect of the damping ratio, mass ratio, and stiffness on the vibration damping. The fundamental frequency of the FATMD at different spans is verified by simulation and experiments. Forced vibration experiments with different excitation frequencies are also conducted to verify the performance of the FATMD. The results show that the proposed FATMD can effectively suppress the vertical vibration of structures at different excitation frequencies, including frequencies at a range higher than what a traditional TMD may not be able to suppress. Additionally, the proposed FATMD is applied to a long-span pedestrian bridge which vibrates frequently due to the walking of pedestrians, the running of escalators, and earthquakes. The numerical results indicate that the FATMD can effectively reduce the vertical vibration of the pedestrian bridge under the excitations of pedestrians, escalators, and earthquakes.

A Bidirectional Pounding Tuned Mass Damper and Its Application to Transmission Tower-Line Systems under Seismic Excitations

2019 ◽  
Vol 19 (06) ◽  
pp. 1950056 ◽  
Author(s):  
Li Tian ◽  
Kunjie Rong ◽  
Kaiming Bi ◽  
Peng Zhang
Keyword(s):  
Element Model ◽  
Tuned Mass Damper ◽  
Seismic Intensity ◽  
Design Parameters ◽  
Seismic Responses ◽  
Transmission Tower ◽  
Control Effect ◽  
Seismic Excitations ◽  
Line System ◽  
Mass Damper

Failures of transmission tower-line systems have frequently occurred during large earthquakes. It is essential to control the excessive vibrations of transmission tower-line systems to ensure their safe operation in such events. This paper numerically investigates the effectiveness of using a novel bidirectional pounding tuned mass damper (BPTMD) to control the seismic responses of transmission tower-line system when subjected to earthquake ground motions. A finite element model of a typical transmission tower-line system with BPTMD is developed using the commercial software ABAQUS, with the accuracy of the results verified against a previous study. The seismic responses of the system with and without BPTMD are calculated. For comparison, the control effect of using the conventional bidirectional tuned mass damper is also calculated and discussed. Finally, a parametric study is performed to investigate the effects of the mass ratio, seismic intensity, gap size and frequency ratio on the seismic response of the system, while optimal design parameters are obtained.

Robust multi-objective optimization design of active tuned mass damper system to mitigate the vibrations of a high-rise building

2014 ◽  
Vol 229 (1) ◽  
pp. 26-43 ◽  
Author(s):  
S Pourzeynali ◽  
S Salimi
Keyword(s):  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Robust Design Optimization ◽  
Design Parameters ◽  
Control Force ◽  
Multi Objective ◽  
High Rise ◽  
High Rise Building ◽  
Mass Damper ◽  
Damper Design

In engineering applications, many control devices have been developed to reduce the vibrations of structures. Active tuned mass damper system is one of these devices, which is a combination of a passive tuned mass damper system and an actuator to produce a control force. The main objective of this paper is to present a practical procedure for both deterministic and probabilistic design of the active tuned mass damper control system using multi-objective genetic algorithms to mitigate high-rise building responses. For this purpose, extensive numerical analyses have been performed, and optimal robust results of the active tuned mass damper design parameters with their effectiveness in reducing the example building responses have been presented. Uncertainties, which may exist in the system, have been taken into account using a robust design optimization procedure. The stiffness matrix and damping ratio of the building are considered as uncertain random variables; and using the well-known beta distribution, 50 pairs of these variables are generated. This resulted in 50 buildings with different stiffness matrices and damping ratios. These simulated buildings are used to evaluate robust optimal values of the active tuned mass damper design parameters. Four non-commensurable objective functions, namely maximum displacement, maximum velocity, maximum acceleration of each floor of the building, and active control force produced by the actuator are considered, and a fast and elitist non-dominated sorting genetic algorithm approach is used to find a set of pareto-optimal solutions.

Mitigation of Vortex-Induced Vibrations of a Pivoted Circular Cylinder Using an Adaptive Pendulum Tuned-Mass Damper

2013 ◽  
Vol 135 (11) ◽  
Author(s):  
Sina Kheirkhah ◽  
Richard Lourenco ◽  
Serhiy Yarusevych ◽  
Sriram Narasimhan
Keyword(s):  
Frequency Response ◽  
Natural Frequency ◽  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Single Frequency ◽  
Fundamental Frequencies ◽  
Transverse Vibrations ◽  
Synchronization Region ◽  
Vortex Induced Vibrations ◽  
Mass Damper

A novel adaptive pendulum tuned-mass damper (TMD) was integrated with a two degree-of-freedom (DOF) cylindrical structure in order to control vortex-induced vibrations of the structure. The natural frequency of the TMD was adjusted autonomously in order to control the vortex-induced vibrations. The experiments were performed at a constant Reynolds number of 2100 and for four reduced velocities, 4.18, 5.44, 6.00, and 6.48. Two TMD damping ratios, 0 and 0.24, were investigated for a constant TMD mass ratio of 0.087. The results demonstrate that tuning the natural frequency of the TMD to the natural frequency of the structure decreases the amplitudes of transverse and streamwise vibrations of the structure significantly. Specifically, the transverse amplitudes of vibrations are decreased by a factor of ten and streamwise amplitudes of vibrations are decreased by a factor of three. Depending on the value of the TMD damping ratio, the frequency of transverse vibrations is either characterized by the natural frequency of the structure or by two other fundamental frequencies, one higher and the other lower than the natural frequency of the structure. The results demonstrate that, independent of the TMD damping and tuning frequency ratios, the frequency of streamwise vibrations matches that of the transverse vibrations in the synchronization region, and the cylinder traces elliptic trajectories. A mathematical model is proposed to gain insight into the frequency response of the structure and fluid-structure interactions. The model shows that, for low TMD damping ratios, the frequency response of the structure equipped with the TMD is characterized by two fundamental frequencies; whereas, for relatively high TMD damping ratios, the frequency response of the structure is characterized by a single frequency, i.e., the natural frequency. In both cases, the fluid forcing within the synchronization region is linked to the fundamental frequency/frequencies of the structure. Thus, the classical definition of synchronization applies to multiple DOF structures undergoing vortex-induced vibrations.

scholarly journals Seismic and Wind Analysis of Regular and Irregular RC Structures with Tuned Mass Damper

2019 ◽  
Vol 8 (3) ◽  
pp. 2263-2269
Keyword(s):  
Damping Ratio ◽  
Time History ◽  
Tuned Mass Damper ◽  
Ground Movement ◽  
Building Structures ◽  
Rc Structures ◽  
Dynamic Forces ◽  
Mass Damper ◽  
Rc Building ◽  
The Impact

Latest trend in the development high rise structure demanding taller and lighter structures, which are progressively adaptable with very low damping ratio. As the structures developing vertically, they are ending up all the more affecting by powerful excitation forces, for example, wind and seismic forces. For the more safety of structure and inhabitant's solace, the vibrations of the tall structures become a major issue for both structural designers. So as to control the vibration, various methodologies are proposed out of the few systems accessible for vibration control. Out of numerous methods, TMD has been observed to be increasingly powerful in controlling the dynamic forces caused due to seismic and wind excitations. In this paper, the adequacy of TMD in controlling the dynamic reaction of structures and the impact of different ground movement parameters on the seismic viability of TMD is researched. Essentially, a TMD is a vibratory subsystem appended to a bigger scale host structure so as to lessen the dynamic reactions. The frequency of damper will tuned to essential structure's frequency, so when frequency is high, the damper will results to resonate out of phase along with structural movement. The objective of this work is to study the impact of TMD on the dynamic forces brought about by seismic tremor and wind excitations in standard just as unpredictable in tall RC building structures. For that three 22 story RC building structures are considered with a similar arrangement out of which one ordinary regular structure and the other two are irregular RC structures are demonstrated in Etabs. In irregular RC structures, Stiffness irregularity and torsional irregularity are considered. For assessing seismic and wind reactions of structures, time history analysis, and static analysis used, with and without the tuned mass damper in ETABS. The outcomes acquired from the investigation of three 22 story RC structures with and without tuned mass damper are compared

scholarly journals A Comparative Study of the Optimum Tuned Mass Damper for High-rise Structures Considering Soil-structure Interaction

2021 ◽  
Author(s):  
Ali Kaveh ◽  
Shaylin Rezazadeh Ardebili
Keyword(s):  
Soil Structure ◽  
Heuristic Algorithms ◽  
Soft Soil ◽  
Damping Ratio ◽  
Tuned Mass Damper ◽  
Soil Structure Interaction ◽  
Water Strider ◽  
Structure Interaction ◽  
Colliding Bodies Optimization ◽  
Mass Damper

The present paper focuses on the optimum design of tuned mass damper (TMD) as a device for control of the structures. The optimum free vibration parameters such as period and damping ratio depend on the soil condition. For this reason, the seven meta-heuristic algorithms namely colliding bodies optimization (CBO), enhanced colliding bodies optimization (ECBO), water strider algorithm (WSA), dynamic water strider algorithm (DWSA), ray optimization (RO) algorithm, teaching-learning-based optimization (TLBO) algorithm and plasma generation optimization (PGO) are used to find the TMD parameters considering soil-structure interaction (SSI) effects. These optimization methods are applied to a benchmark 40-story structure. For comparison, the obtained results of these algorithms are compared. The capability and robustness of the algorithms are investigated through the benchmark problem. The results are shown that the soil type affects the optimum values of the TMD parameters, especially for the soft soil. To evaluate the performance of the obtained parameters in both the frequency and time domains, time history displacement and acceleration transfer function of the top story of the structure are calculated for the model with and without considering the SSI effects.

scholarly journals Wind-Induced Response Control of High-Rise Buildings Using Inerter-Based Vibration Absorbers

2019 ◽  
Vol 9 (23) ◽  
pp. 5045 ◽  
Author(s):  
Qinhua Wang ◽  
Haoshuai Qiao ◽  
Dario De Domenico ◽  
Zhiwen Zhu ◽  
Zhuangning Xie
Keyword(s):  
Damping Ratio ◽  
Element Model ◽  
Tuned Mass Damper ◽  
Induced Response ◽  
Vibration Absorbers ◽  
Acceleration Response ◽  
Vibration Mitigation ◽  
High Rise ◽  
Mass Damper ◽  
Good Trade

The beneficial mass-amplification effect induced by the inerter can be conveniently used in enhanced variants of the traditional Tuned Mass Damper (TMD), namely the Tuned Mass-Damper-Inerter (TMDI) and its special case of Tuned Inerter Damper (TID). In this paper, these inerter-based vibration absorbers are studied for mitigating the wind-induced response of high-rise buildings, with particular emphasis on a 340 m tall building analyzed as case study. To adopt a realistic wind-excitation model, the analysis is based on aerodynamic forces computed through experimental wind tunnel tests for a scaled prototype of the benchmark building, which accounts for the actual cross-section of the structure and the existing surrounding conditions. Mass and stiffness parameters are extracted from the finite element model of the primary structure. Performance-based optimization of the TMDI and the TID is carried out to find a good trade-off between displacement- and acceleration-response mitigation, with the installation floor being an explicit design variable in addition to frequency and damping ratio. The results corresponding to 24 different wind directions indicate that the best vibration mitigation is achieved with a lower installation floor of the TMDI/TID scheme than the topmost floor. The effects of different parameters of TMD, TMDI and TID on wind-induced displacement and acceleration responses and on the equivalent static wind loads (ESWLs) are comparatively evaluated. It is shown that the optimally designed TMDI/TID can achieve better wind-induced vibration mitigation than the TMD while allocating lower or null attached mass, especially in terms of acceleration response.

Sign in / Sign up

Export Citation Format

Share Document