Experimental and shear bearing capacity studies of the assembled composite wall with bolted connections

2020 ◽  
Vol 29 (6) ◽  
Author(s):  
Wei Huang ◽  
Xinwei Miao ◽  
Gaoxing Hu ◽  
Zhenhui Fan ◽  
Jiarui Zhang ◽  
...  
Keyword(s):  
Bearing Capacity ◽  
Bolted Connections ◽  
Shear Bearing Capacity ◽  
Composite Wall

Calculation Method Research of Shear Bearing Capacity for Frame-Sparse Gridiron Composite Wall

2012 ◽  
Vol 487 ◽  
pp. 232-236
Author(s):  
Xu Feng Jiang ◽  
Meng Guo ◽  
Cheng Hao Wu
Keyword(s):  
Bearing Capacity ◽  
Calculation Method ◽  
Resistance Mechanism ◽  
Bottom Layer ◽  
Masonry Structure ◽  
Frame Structure ◽  
Calculation Results ◽  
Shear Bearing Capacity ◽  
Capacity Calculation ◽  
Composite Wall

In order to enhance the anti-seismic performance of the frame structure and masonry structure with frame at bottom layer, combined shear wall consisting of frame and gridiron composite wall was proposed in this paper, and shear bearing capacity calculation method for the wall was researched. 1/2 scale frame-sparse gridiron composite walls were tested under reversed cyclic loading. Damage processes, load-bearing capacity and hysteretic curves characters of the walls were analyzed. Based on the experiments and reinforced concrete masonry walls data, the force features and shear resistance mechanism of the wall were analyzed, and general shear bearing capacity formula were put forward, and application methods under different conditions were given at the same time. Comparative analysis between calculation results and test results indicated that the formula was accurate enough, and can be referred to in the new construction and post-quake reconstruction of frame structure or masonry structure with frame at bottom layer.

Research on Shear Bearing Capacity of Reinforced Concrete Short Beam in Salt-Fog Environment

2012 ◽  
Vol 455-456 ◽  
pp. 1079-1083
Author(s):  
Wei Jun Yang ◽  
Hong Jia Huang ◽  
Wen Yu Jiang ◽  
Yi Bin Peng
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Salt Spray ◽  
Test Chamber ◽  
Shear Capacity ◽  
Salt Spray Test ◽  
Concrete Members ◽  
Short Beam ◽  
Shear Bearing Capacity ◽  
Salt Fog

Shantou atmospheric salt-fog environment is simulated with the comprehensive salt spray test chamber. By using reinforced concrete short beams under different water-cement radio, different corrosion time, the inclined section degradation rules of the corrosive reinforced concrete members are researched for establishing shear capacity of short beam formulas in salt-fog environment.

The Ultimate Shear Bearing Capacity of RC Beam Strengthened with SWR External Prestressing under Dead Load Level when Strengthening

2011 ◽  
Vol 368-373 ◽  
pp. 2175-2179
Author(s):  
Tian Lai Yu ◽  
Hong Kun Han ◽  
Xin Yu Li ◽  
Qiang Ma
Keyword(s):  
Bearing Capacity ◽  
Concrete Beams ◽  
Steel Wire ◽  
Load Level ◽  
Shear Capacity ◽  
Dead Load ◽  
External Prestressing ◽  
Reduction Coefficient ◽  
Shear Bearing Capacity ◽  
The Dead

The shear resistant with SWR (steel wire rope) external prestressing is a kind of new type of reinforcement technique. The advantages of the method are ideal reinforcement effect, durability, and convenient construction. So the method has been paid attention by more and more scientists and technical workers. Through the experiment of 1 basic beam and 3 strengthened beams which are in different dead load levels, the influence of damage degree of original beams and the dead load level of strengthened beams are analyzed. The reduction coefficient values of shear capacity under different dead load level are researched. The research is shown that: with the dead load level increasing, the improve degree of shear capacity of strengthened concrete beams is smaller. The mathematical model is established, which is about dead load level and reduction coefficient of shear capacity of strengthened concrete beams. The result is to take 0.75 as the reduction coefficient of shear capacity. The value is reasonable in calculating the shear bearing capacity of strengthened beams under dead load.

scholarly journals Experimental and Numerical Study on Ultimate Shear Load Carrying Capacity of Corroded RC Beams

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Zhanzhan Tang ◽  
Zhixiang He ◽  
Zheng Chen ◽  
Lingkun Chen ◽  
Hanyang Xue ◽  
...  
Keyword(s):  
Shear Strength ◽  
Bearing Capacity ◽  
Cross Section ◽  
Loss Rate ◽  
Numerical Study ◽  
Rc Beams ◽  
Load Carrying ◽  
Shear Bearing Capacity ◽  
The Cross ◽  
The Impact

For an RC beam, the strength of steel rebar, the bonding strength between the concrete and reinforcement, and the bite action between the aggregates will deteriorate significantly due to corrosion. In the present study, 10 RC beams were designed to study the impact of corrosion on the shear bearing capacity. The mechanism of corrosion for stirrups and longitudinal bars and their effects were analyzed. Based on the existing experimental data, the correlation between the stirrup corrosion factor and the cross section loss rate was obtained. An effective prediction formula on the shear bearing capacity of the corroded RC beams was proposed and validated by the experimental results. Moreover, a numerical analysis approach based on the FE technique was proposed for the prediction of the shear strength. The results show that corrosion of the reinforcements could reduce the shear strength of the RC beams. The corrosion of stirrups can be numerically simulated by the reduction of the cross section. The formulae in the literature are conservative and the predictions are very dispersed, while the predictions by the proposed formula agree very well with the experiment results.

Research on Shear Bearing Capacity of Reinforced Concrete Short Beam in Salt-Fog Environment

2012 ◽  
Vol 455-456 ◽  
pp. 1079-1083
Author(s):  
Wei Jun Yang ◽  
Hong Jia Huang ◽  
Wen Yu Jiang ◽  
Yi Bin Peng
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Short Beam ◽  
Shear Bearing Capacity ◽  
Salt Fog

A model for predicting the shear bearing capacity of FRP-strengthened beams

2008 ◽  
Vol 44 (3) ◽  
pp. 245-256 ◽  
Author(s):  
G. Sas ◽  
A. Carolin ◽  
B. Täljsten
Keyword(s):  
Bearing Capacity ◽  
Shear Bearing Capacity

Influence and Analysis on the Bearing Capacity of Reinforced-Concrete-Frame Node in Beam and Plate's Constraint

2013 ◽  
Vol 351-352 ◽  
pp. 342-346
Author(s):  
Tai Hua Yang ◽  
Xiao Yu ◽  
Jian Wu Gong ◽  
Bin Tang ◽  
Yang Zhi Zhong ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Bearing Capacity ◽  
Reinforced Concrete Beam ◽  
Building Codes ◽  
Frame Structure ◽  
Reinforced Concrete Frame ◽  
Short Side ◽  
Concrete Frame ◽  
Shear Bearing Capacity ◽  
Formal Design

According to the domestic and foreign various building codes and a kind of limit fitting formula, to calculate and analyze the compressive bearing capacity of sandwich reinforced concrete beam-column nodes in a high-rising frame structure engineering, and to compare with the results calculated by Midas. They shown those are the facts that cant be neglected, the compressive bearing capacity of the sandwich node core area concrete in beam and plates constraint would improve and the amplitude of improving would be great. But current Chinese building codes haven't included them in the formal design provisions, these ways have to be perfected. In the same time, beam and plate constraint would also have a certain effect to the shear bearing capacity. By contrast, the shear bearing capacity in considering beam and plate constraint would increase 12% to 24%, it would get to 91% of the limit fitting formula calculation value when the short side was sheared, and it is 92% when the long side was sheared. That shown it is quite perfect in considering the effect of the orthogonal beam-plate constraints in domestic seismic code.

Experimental Study on the Shear Capacity of Rabbet Cast-in-Place Prefabricated Beam

2020 ◽  
Vol 980 ◽  
pp. 266-274
Author(s):  
Jian Hua Xiao ◽  
Miao Liu ◽  
Jin Li Wang ◽  
Abdulhamid Yakubu Anvah
Keyword(s):  
Mechanical Properties ◽  
Bearing Capacity ◽  
Failure Mode ◽  
Concrete Beam ◽  
Joint Stiffness ◽  
Load Level ◽  
Shear Capacity ◽  
Oblique Section ◽  
Shear Bearing Capacity ◽  
The Relationship

In order to investigate the shear capacity of prefabricated beam, experiments about shear bearing were performed on one integral pouring contrast beam and two prefabrication and assembly beams. Inspecting the relationship between load and deflection under the load, the development regularity of strain between longitude reinforced and stirrup, the shear capacity of cracking load and ultimate bearing capacity, analyzing failure mode of oblique section and connection performance of old and new concrete in the groove, and compared with the mechanical properties of cast-in-place concrete beam. The experimental results indicate that: prefabrication and assembly beam and cast-in-place beams have similar shear bearing capacity and failure mode of oblique section, along with the load level continues to increase, the groove joint stiffness weakened, but has little effect on the overall deformation.

Sign in / Sign up

Export Citation Format

Share Document