Improvement of energy damage index bounds for circular reinforced concrete bridge piers under dynamic analysis

2021 ◽  
Author(s):  
Pouya Amirchoupani ◽  
Gholamreza Abdollahzadeh ◽  
Hamed Hamidi
Keyword(s):  
Reinforced Concrete ◽  
Dynamic Analysis ◽  
Damage Index ◽  
Bridge Piers ◽  
Concrete Bridge ◽  
Reinforced Concrete Bridge

The Impact of Corrosion on the Seismic Assessment of Reinforced Concrete Bridge Piers

2021 ◽  
pp. 718-725
Author(s):  
Alessandro Rasulo ◽  
Angelo Pelle ◽  
Giuseppe Quaranta ◽  
Davide Lavorato ◽  
Gabriele Fiorentino ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Seismic Assessment ◽  
Bridge Piers ◽  
Concrete Bridge ◽  
Reinforced Concrete Bridge ◽  
The Impact

scholarly journals Study on Concrete Pier Impact Performance after Implementing Equal Cross-Section Stainless Steel with Protection from Closed-Cell Aluminum Foam

2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Xiwu Zhou ◽  
Honglong Zhang ◽  
Wenchao Zhang ◽  
Guoxue Zhang
Keyword(s):  
Stainless Steel ◽  
Reinforced Concrete ◽  
Aluminum Foam ◽  
Bridge Piers ◽  
Concrete Bridge ◽  
Reinforced Concrete Bridge ◽  
Impact Forces ◽  
Closed Cell ◽  
Steel Bars ◽  
The Impact

In the present study, in order to examine the impact performances of ordinary reinforced concrete bridge piers which have been replaced by stainless-steel bars of equal cross-sections under the protective condition of anticollision material, the impact dynamic responses of the ordinary reinforced concrete bridge piers, with replacements under the protection of closed-cell aluminum foam, were compared and analyzed using an ultrahigh drop hammer impact test system. The results showed that when the impact velocity was small (for example, less than 1.42 M/s), after the implementation of equal cross-sectional replacements, the closed-cell aluminum foam had been in an elastic or yield stage. During that stage, the impact forces of the stainless-steel reinforced concrete piers were larger than those of the ordinary reinforced concrete piers, and the relative ratios were stable at approximately 28 to 34%. In addition, the relative ratios of the displacements at the tops of the components were also found to be stable at approximately 22%, and the change rates of the concrete ultrasonic damages were approximately the same. However, when the impact forces had increased (for example, more than 1.67 m/s), the closed-cell aluminum foam entered a densification stage, and the peak impact force ratios decreased sharply. It was also observed that the relative peak displacement ratios at the tops of the components displayed increasing trends, and the change rates of the concrete ultrasonic damages had displayed major flux. Therefore, the replacement of the ordinary piers with stainless-steel bars had increased the possibility of shear failures.

Sign in / Sign up

Export Citation Format

Share Document