Application of Generalised Beam Theory to curved members with circular axis

Stahlbau ◽  
2018 ◽  
Vol 87 (4) ◽  
pp. 345-354 ◽  
Author(s):  
Rodrigo Gonçalves ◽  
Dinar Camotim ◽  
Nuno Peres
Keyword(s):  
Beam Theory ◽  
Generalised Beam Theory ◽  
Circular Axis

First-order generalised beam theory for curved thin-walled members with circular axis

2016 ◽  
Vol 107 ◽  
pp. 345-361 ◽  
Author(s):  
Nuno Peres ◽  
Rodrigo Gonçalves ◽  
Dinar Camotim
Keyword(s):  
Beam Theory ◽  
First Order ◽  
Thin Walled ◽  
Generalised Beam Theory ◽  
Circular Axis

Post-buckling inelastic analysis of thin-walled metal members using the Generalised Beam Theory

2019 ◽  
Author(s):  
Miguel Abambres ◽  
Dinar Camotim ◽  
Miguel Abambres
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Beam Theory ◽  
Flow Theory ◽  
Promising Alternative ◽  
Inelastic Analysis ◽  
Post Buckling ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Generalised Beam Theory

A 2nd order inelastic Generalised Beam Theory (GBT) formulation based on the J2 flow theory is proposed, being a promising alternative to the shell finite element method. Its application is illustrated for an I-section beam and a lipped-C column. GBT results were validated against ABAQUS, namely concerning equilibrium paths, deformed configurations, and displacement profiles. It was concluded that the GBT modal nature allows (i) precise results with only 22% of the number of dof required in ABAQUS, as well as (ii) the understanding (by means of modal participation diagrams) of the behavioral mechanics in any elastoplastic stage of member deformation .

Generalised Beam Theory for composite beams with longitudinal and transverse partial interaction

2016 ◽  
Vol 22 (10) ◽  
pp. 2011-2039 ◽  
Author(s):  
Gerard Taig ◽  
Gianluca Ranzi
Keyword(s):  
Structural Response ◽  
Beam Theory ◽  
Element Model ◽  
Composite Beams ◽  
Cross Sectional ◽  
Shear Connections ◽  
Dynamic Analyses ◽  
Partial Interaction ◽  
Deformation Modes ◽  
Generalised Beam Theory

This paper presents a Generalised Beam Theory formulation to study the partial interaction behaviour of two-layered prismatic steel–concrete composite beams. The novelty of the proposed approach is in its capacity to handle the deformability of the shear connections at the interface between the slab and steel beam in both the longitudinal and transverse directions in the evaluation of the deformation modes. This method falls within a category of cross-sectional analyses available in the literature for which a suitable set of deformation modes, including conventional, extension and shear, is determined from dynamic analyses of discrete planar frame models representing the cross-section. In this context, the shear connections are modelled using shear deformable spring elements. As a result, the in-plane partial shear interaction behaviour is accounted for in the planar dynamic analysis during the evaluation of the conventional and extension modes, while the longitudinal partial interaction behaviour associated with the shear modes is included in the out-of-plane dynamic analyses. In the case of the conventional modes, the longitudinal slip is accounted for in the post-processing stage where the warping displacements are determined. A numerical example of a composite box girder beam is presented and its structural response investigated for different levels of shear connection stiffness in both the longitudinal and transverse directions. The accuracy of the numerical results is validated against those obtained with a shell finite element model implemented in ABAQUS/Standard software.

Generalised Beam Theory (GBT) for Shear Deformable Stiffened Sections

2014 ◽  
Vol 553 ◽  
pp. 600-605
Author(s):  
Gerard Taig ◽  
Gianluca Ranzi
Keyword(s):  
Cross Sections ◽  
Beam Theory ◽  
Element Model ◽  
Elastic Behaviour ◽  
Structural Behaviour ◽  
Thin Walled ◽  
Shell Finite Element ◽  
Linear Elastic Behaviour ◽  
Generalised Beam Theory ◽  
Shear Deformable

A Generalised Beam Theory (GBT) formulation is presented to analyse the structural behaviour of shear deformable thin-walled members with partially stiffened cross-sections located at arbitrary locations along their length. The deformation modes used in the formulation are taken as the dynamic eigenmodes of a planar frame representing the unstiffened cross-section. Constraint equations are derived and implemented in the GBT member analysis to model the influence of rigid stiffeners on the member response. The accuracy of the approach is validated against a shell finite element model developed in Abaqus. A numerical example describing the linear elastic behaviour of partially stiffened thin-walled member is provided to outline the usability and flexibility of the proposed method.

scholarly journals Geometrically and Physically Non-Linear GBT-Based Analysis of Thin-Walled Steel Members

2020 ◽  
Author(s):  
Abambres M ◽  
Camotim D ◽  
Silvestre N
Keyword(s):  
Beam Theory ◽  
Arbitrary Cross Section ◽  
Deformation Pattern ◽  
Equilibrium Equations ◽  
Steel Members ◽  
Non Linear ◽  
Geometrical Imperfections ◽  
Post Buckling ◽  
Thin Walled ◽  
Generalised Beam Theory

<p>This paper presents and illustrates the application of an elastic-plastic Generalised Beam Theory (GBT) formulation, based on J<sub>2</sub>-flow plasticity theory, that makes it possible to perform physically and geometrically non-linear (post-buckling) analyses of prismatic thin-walled members (i) with arbitrary cross-section shapes, (ii) exhibiting any type of deformation pattern (global, local, distortional, warping, shear), (iii) made from non-linear materials with isotropic strain-hardening and (iv) containing initial imperfections, namely residual stresses and/or geometric imperfections, having generic distributions. After providing a brief overview of the main GBT assumptions, kinematical relations and equilibrium equations, the development of a novel non-linear beam finite element (FE) is addressed in some detail. Moreover, its application is illustrated through the presentation and discussion of numerical results concerning the post-buckling behaviour of a fixed-ended I-section steel column exhibiting local initial geometrical imperfections, namely (i) non-linear equilibrium paths, (ii) displacement profiles, (iii) stress diagrams/distributions and (iv) deformed configurations. For validation purposes, the GBT results are also compared with values yielded by Abaqus rigorous shell FE analyses.</p>

scholarly journals Generalized Beam Theory formulation for thin-walled pipes with circular axis

2020 ◽  
pp. 107243
Author(s):  
Abinet K. Habtemariam ◽  
Carsten Könke ◽  
Volkmar Zabel ◽  
Marcelo J. Bianco
Keyword(s):  
Beam Theory ◽  
Theory Formulation ◽  
Thin Walled ◽  
Circular Axis ◽  
Generalized Beam Theory
Sign in / Sign up

Export Citation Format

Share Document