Numerical Study on the Effect of a Novel Swirling Flow Generator for Submerged Entry Nozzle in Tundish

2020 ◽  
Vol 91 (6) ◽  
pp. 1900578
Author(s):  
Jianchuan Yan ◽  
Tao Li ◽  
Shufeng Yang ◽  
Zhiqiang Shang ◽  
Min Tan
Keyword(s):  
Swirling Flow ◽  
Numerical Study ◽  
Submerged Entry Nozzle ◽  
Flow Generator

scholarly journals Numerical Study on the Gas–Solid Flow in a Spouted Bed Installed with a Controllable Nozzle and a Swirling Flow Generator

ACS Omega ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 1014-1024
Author(s):  
Feng Wu ◽  
Xinxin Che ◽  
Zhenyu Huang ◽  
Haojie Duan ◽  
Xiaoxun Ma ◽  
...  
Keyword(s):  
Swirling Flow ◽  
Numerical Study ◽  
Spouted Bed ◽  
Solid Flow ◽  
Flow Generator

INFLUENCE OF FLOW SWIRLING ON COMBUSTION OF ALUMINUM POWDER AEROSUSPENSION IN A CHAMBER WITH EXTENSION

2020 ◽  
Author(s):  
A. Yu. Krainov ◽  
◽  
K. M. Moiseeva ◽  
V. A. Poryazov ◽  
◽  
...  
Keyword(s):  
Dynamic Model ◽  
Aluminum Powder ◽  
Swirling Flow ◽  
Numerical Study ◽  
Mathematical Formulation ◽  
Expansion Chamber ◽  
Flow Swirling ◽  
Air Suspension

A numerical study of combustion of the aluminum-air suspension in the swirling flow in the expansion chamber has been performed. The physical and mathematical formulation of the problem is based on the dynamic model of the multiphase reacting media.

scholarly journals Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

2021 ◽  
Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Ebrahim Karimi-Sibaki ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Lorentz Force ◽  
Applied Magnetic Field ◽  
Numerical Study ◽  
Flow Direction ◽  
Experimental Studies ◽  
Submerged Entry Nozzle ◽  
Mean Flow ◽  
Slab Caster ◽  
The Mean

AbstractA numerical study is presented that deals with the flow in the mold of a continuous slab caster under the influence of a DC magnetic field (electromagnetic brakes (EMBrs)). The arrangement and geometry investigated here is based on a series of previous experimental studies carried out at the mini-LIMMCAST facility at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The magnetic field models a ruler-type EMBr and is installed in the region of the ports of the submerged entry nozzle (SEN). The current article considers magnet field strengths up to 441 mT, corresponding to a Hartmann number of about 600, and takes the electrical conductivity of the solidified shell into account. The numerical model of the turbulent flow under the applied magnetic field is implemented using the open-source CFD package OpenFOAM®. Our numerical results reveal that a growing magnitude of the applied magnetic field may cause a reversal of the flow direction at the meniscus surface, which is related the formation of a “multiroll” flow pattern in the mold. This phenomenon can be explained as a classical magnetohydrodynamics (MHD) effect: (1) the closure of the induced electric current results not primarily in a braking Lorentz force inside the jet but in an acceleration in regions of previously weak velocities, which initiates the formation of an opposite vortex (OV) close to the mean jet; (2) this vortex develops in size at the expense of the main vortex until it reaches the meniscus surface, where it becomes clearly visible. We also show that an acceleration of the meniscus flow must be expected when the applied magnetic field is smaller than a critical value. This acceleration is due to the transfer of kinetic energy from smaller turbulent structures into the mean flow. A further increase in the EMBr intensity leads to the expected damping of the mean flow and, consequently, to a reduction in the size of the upper roll. These investigations show that the Lorentz force cannot be reduced to a simple damping effect; depending on the field strength, its action is found to be topologically complex.

An experimental and numerical study of turbulent swirling flow in gas cyclones

1999 ◽  
Vol 54 (13-14) ◽  
pp. 2055-2065 ◽  
Author(s):  
A.J. Hoekstra ◽  
J.J. Derksen ◽  
H.E.A. Van Den Akker
Keyword(s):  
Swirling Flow ◽  
Numerical Study

Study of Flow and Convective Heat Transfer in a Simulated Scaled Up Low Emission Annular Combustor

2011 ◽  
Vol 3 (3) ◽  
Author(s):  
Sunil Patil ◽  
Teddy Sedalor ◽  
Danesh Tafti ◽  
Srinath Ekkad ◽  
Yong Kim ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Convective Heat ◽  
Swirling Flow ◽  
Numerical Study ◽  
Swirl Number ◽  
Maximum Heat ◽  
Number Range ◽  
Maximum Heat Transfer ◽  
Annular Combustor

Modern dry low emissions (DLE) combustors are characterized by highly swirling and expanding flows that makes the convective heat load on the gas side difficult to predict and estimate. A coupled experimental–numerical study of swirling flow inside a DLE annular combustor model is used to determine the distribution of heat transfer on the liner walls. Three different Reynolds numbers are investigated in the range of 210,000–840,000 with a characteristic swirl number of 0.98. The maximum heat transfer coefficient enhancement ratio decreased from 6 to 3.6 as the flow Reynolds number increased from 210,000 to 840,000. This is attributed to a reduction in the normalized turbulent kinetic energy in the impinging shear layer, which is strongly dependent on the swirl number that remains constant at 0.98 for the Reynolds number range investigated. The location of peak heat transfer did not change with the increase in Reynolds number since the flow structures in the combustors did not change with Reynolds number. Results also showed that the heat transfer distributions in the annulus have slightly different characteristics for the concave and convex walls. A modified swirl number accounting for the step expansion ratio is defined to facilitate comparison between the heat transfer characteristics in the annular combustor with previous work in a can combustor. A higher modified swirl number in the annular combustor resulted in higher heat transfer augmentation and a slower decay with Reynolds number.

A Numerical Study on Flow Characteristics Through Orifice Flowmeter and Measurement Accuracy Depending on Upstream Straight Length

2017 ◽  
Author(s):  
Jang Il Lee ◽  
Ae Ju Cheong ◽  
Bok Ki Min
Keyword(s):  
Numerical Analysis ◽  
Measurement Accuracy ◽  
Performance Test ◽  
Swirling Flow ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Orifice Plate ◽  
3 Dimensional ◽  
Ansys Cfx ◽  
Axial Velocity Profile

In this numerical study, Commercial CFD (Computational Fluid Dynamics) code, ANSYS CFX ver. 17.1, is used to analyze the 3-Dimensional flow characteristics through orifice plate (β = 0.6) with two 90 degree bends in different planes. The purpose of this numerical study is to evaluate measurement accuracy and flow characteristics of orifice flowmeter depending on upstream straight length from 12D to 56D. Thus, numerical calculations of pressure drop caused by swirling flow and distortion of axial velocity profile on orifice plate are performed by using numerical analysis. In addition, numerical analysis results are compared with recommended upstream straight length of ASME Performance Test Codes 19.5 for orifice plates and nozzles. The results show that if upstream straight length of orifice flowmeter is more than 40D, there is a little deviation of differential pressure. Moreover, it is found that up-down asymmetry of recirculation zones is relatively attenuated as the upstream straight length increases.

Sign in / Sign up

Export Citation Format

Share Document