Effects of Blast Furnace Main Trough Geometry on the Slag‐Metal Separation Based on Numerical Simulation

2018 ◽  
Vol 90 (2) ◽  
pp. 1800383
Author(s):  
Mingyin Kou ◽  
Shun Yao ◽  
Shengli Wu ◽  
Heng Zhou ◽  
Jian Xu
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Metal Separation ◽  
Main Trough

Phase Evolution Simulation of Al2O3-SiС-C Castable with Cr2O3 Addition by Thermodynamic Calculation

2012 ◽  
Vol 462 ◽  
pp. 77-83
Author(s):  
Yu Cheng Yin ◽  
Yu Cheng Yin ◽  
Shan Ge ◽  
Jiu Chang Lu ◽  
Jian Hua Nie
Keyword(s):  
Blast Furnace ◽  
Calcium Aluminate ◽  
Thermodynamic Calculation ◽  
Phase Evolution ◽  
Work Conditions ◽  
Evolution Simulation ◽  
Air Atmosphere ◽  
Main Trough ◽  
Real Work ◽  
Aluminate Cement

In order to make sure whether the Cr2O3would change to Cr6+during the service, 4wt % Cr2O3was added to the calcium aluminate cement bonded Al2O3-SiC-C castables for blast furnace main trough, then the phase evolution was analyzed through thermodynamic calculation done by Factsage 6.1 under air atmosphere, which is close to its real work conditions. Calculations results show that Cr2O3was reduced to Cr3C2with low air amount, with amount of air increase, Cr3C2transformed to Cr4C and Cr5Si3successively, and turned to Cr2O3at last with much more air, and no compound including Cr6+was founded.

Numerical Simulation of Innovative Operation of Blast Furnace Based on Multi-Fluid Model

2006 ◽  
Vol 13 (6) ◽  
pp. 8-15 ◽  
Author(s):  
Man-sheng Chu ◽  
Xue-feng Yang ◽  
Feng-man Shen ◽  
Jun-ichiro Yagi ◽  
Hiroshi Nogami
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Fluid Model

scholarly journals Slag-metal Separation in the Blast Furnace Trough.

1998 ◽  
Vol 38 (5) ◽  
pp. 430-439 ◽  
Author(s):  
Hagdong Kim ◽  
Bahri Ozturk ◽  
R. J. Fruehan
Keyword(s):  
Blast Furnace ◽  
Metal Separation

scholarly journals Numerical simulation analysis of rotary cup centrifugal blast furnace slag

2022 ◽  
Vol 355 ◽  
pp. 02011
Author(s):  
Mengyuan Yang ◽  
Jingfu Wang
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Liquid Film ◽  
Blast Furnace Slag ◽  
Molten Slag ◽  
Rotation Speed ◽  
Simulation Analysis ◽  
Solid Particles ◽  
Dry Granulation ◽  
Furnace Slag

In the process of centrifugal dry granulation of blast furnace slag, the thickness of the liquid film at the outlet of the rotor will have a significant impact on the degree of crushing of the slag after leaving the rotor and the size of the solid particles formed. Therefore, this paper uses the VOF method to analyse the flow of molten slag inside the cup. The results have shown that the slag flow has a significant effect on the thickness of the liquid film and the linear relationship is obvious; the thickness of the liquid film decreases with the increase of the diameter of the rotary cup and the rotation speed, and the negative correlation with the diameter of the cup is more obvious; Secondly, as the depth of the cup increases, the thickness of the liquid film decreases first and then increases. The inclination angle of the cup wall has little effect on the thickness of the liquid film.

Numerical simulation of co-injection of pulverized coal and blast furnace gas separated by a membrane

2020 ◽  
pp. 1-10
Author(s):  
Lili Jiang ◽  
Yuanshou Zhao ◽  
Yimin Meng ◽  
Sihao Tu ◽  
Zhaoyu Chen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Pulverized Coal ◽  
Blast Furnace Gas

scholarly journals Research Status and Development Trend of Numerical Simulation on Blast Furnace Lining Erosion

2009 ◽  
Vol 49 (9) ◽  
pp. 1277-1282 ◽  
Author(s):  
Kuncan Zheng ◽  
Zhi Wen ◽  
Xunliang Liu ◽  
Yanqiu Ren ◽  
Wenfei Wu ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Development Trend ◽  
Furnace Lining ◽  
Research Status ◽  
Blast Furnace Lining

scholarly journals Numerical Simulation of the Raceway Zone in Melter Gasifier of COREX Process

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 867 ◽  
Author(s):  
Ye Sun ◽  
Ren Chen ◽  
Zuoliang Zhang ◽  
Guoxi Wu ◽  
Huishu Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Blast Furnace ◽  
Gas Flow ◽  
Chemical Processes ◽  
Blast Furnaces ◽  
Two Phase ◽  
Corex Melter Gasifier ◽  
Unsteady Numerical Simulation ◽  
Physical And Chemical ◽  
Shape And Size

The physical and chemical processes in the raceway zone of the COREX melter–gasifier express are similar to those inside the blast furnace. Based on the research achievements on blast furnaces, the unsteady numerical simulation of a gas-solid two-phase in the raceway was carried out by using computational fluid software. The formation process of the raceway in the COREX melter–gasifier was simulated. The shape and size of the raceway were obtained. Then, the effect of gas flow on the depth and height of the raceway was analyzed in this paper.

Sign in / Sign up

Export Citation Format

Share Document