The Influence of Swirl Flow on the Flow Field, Temperature Field and Inclusion Behavior when Using a Half Type Electromagnetic Swirl Flow Generator in a Submerged Entry and Mold

2015 ◽  
Vol 86 (11) ◽  
pp. 1312-1327 ◽  
Author(s):  
Ying Yang ◽  
Pär G. Jönsson ◽  
Mikael Ersson ◽  
Zhijian Su ◽  
Jicheng He ◽  
...  
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Swirl Flow ◽  
Field Temperature ◽  
Flow Generator

scholarly journals Research on the Electromagnetic-Heat-Flow Coupled Modeling and Analysis for In-Wheel Motor

2020 ◽  
Vol 11 (2) ◽  
pp. 29
Author(s):  
Haojie Xue ◽  
Di Tan ◽  
Shuaishuai Liu ◽  
Meng Yuan ◽  
Chunming Zhao
Keyword(s):  
Electromagnetic Field ◽  
Temperature Field ◽  
Flow Field ◽  
Weak Coupling ◽  
Working Condition ◽  
Electromagnetic Torque ◽  
Coupling Analysis ◽  
Field Coupling ◽  
Field Temperature ◽  
Coupling Factors

In this paper, a 15 KW in-wheel motor (IWM) is taken as the research object, and the coupling factors among the electromagnetic field, temperature field and flow field are analyzed, and the strong and weak coupling factors between the three fields are clarified, and by identifying the strong and weak coupling factors between the three fields, a three-field coupling analysis model for IWM with appropriate complexity is established, and the validity of the model is verified. In a certain driving condition, the electromagnetic field, temperature field and flow field characteristics of IWM are analyzed with the multi-field coupling model. The result shows that, after the IWM runs 8440 s under driving conditions, in this paper, the IWM electromagnetic torque of the rated working condition is 134.2 Nm, and IWM the electromagnetic torque of the peak working condition is 451.36 Nm, and the power requirement of the motor can be guaranteed. The highest temperature of the IWM is 150 °C, which does not exceed the insulation grade requirements of the motor (155 °C), the highest temperature of the permanent magnet (PM) is 65.6 °C, and it does not exceed the highest operating temperature of the PM, and ensures the accurate calculation of components loss and the temperature of the motor. It can be found, through research, that the electromagnetic torque difference between unidirectional coupling and bidirectional coupling is 3.2%, the maximum temperature difference is 7.98% in the three-field coupling analysis of IWM under rated working conditions. Therefore, it is necessary to consider the influence of coupling factors on the properties of motor materials when analyzing the electromagnetic field, temperature field and flow field of IWM; it also provides some reference value for the simulation analysis of IWM in the future.

Analysis and Improvement on Acoustic Performance of Muffler with the Consideration of Temperature and Flow Velocity

2014 ◽  
Vol 875-877 ◽  
pp. 1143-1147
Author(s):  
Yi Xiang Hu ◽  
Shun Ming Li ◽  
Qing Liu
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Flow Velocity ◽  
Output Power ◽  
Insertion Loss ◽  
Structural Parameters ◽  
Acoustic Fields ◽  
Influence Of Temperature ◽  
Acoustic Performance ◽  
Field Temperature

Aiming for the acoustic performance of expanded-muffler, the acoustic fields, flow field, temperature field and flow regenerated noise inside the expanded-muffler were studied. Furthermore, with the consideration of temperature and flow velocity, the influence of temperature and flow velocity on acoustic performance was obtained. Based on the research, the acoustic performance of an exhaust muffler was studied. By adjusting the structural parameters, without affecting the engine output power, the insertion loss of muffler has average increased by 5.1 dB (A).

scholarly journals Flow Field, Temperature Field, and Inclusion Removal in a New Induction Heating Tundish with Bent Channels

Metals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 561 ◽  
Author(s):  
Fei Xing ◽  
Shuguo Zheng ◽  
Zonghui Liu ◽  
Miaoyong Zhu
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Induction Heating ◽  
Flow Characteristics ◽  
Heating Power ◽  
Inclusion Removal ◽  
Good Efficiency ◽  
Heating Efficiency ◽  
Channel Radius ◽  
Field Temperature

In order to study the flow field, temperature field, and inclusion removal in a new induction heating tundish with bent channels, a three-dimensional (3D) transient mathematical model is established. The effects of both the channel radius and heating power on the multi-physical field and inclusion removal in the bent channels’ induction heating tundish are investigated. The results show that the tundish with the channel radius of 3 m shows better flow characteristics than those with the channel radii of 4 m and 2 m. With the increase of channel length, the heating efficiency increases at first, and then decreases, while the radius of 3 m is the best one for heating efficiency. After all the inclusions are placed into the tundish, the radii of 3 m and 2 m show good efficiency regarding inclusion removal, while it is poor when the radius is 4 m. Therefore, 3 m is the optimal radius of the channel in this work. Under the optimal channel radius, the heating power of 800 kW seems better than those of 600 kW and 1000 kW on flow characteristics control in the tundish. The temperature in the receiving chamber rises gradually and distributes quite uniformly with the increasing heating power, and the removal rate of inclusions increases with the increasing heating power.

Numerical simulation of swirling flow effect on the first stage vane film cooling distribution

2016 ◽  
Vol 07 (03) ◽  
pp. 1650031
Author(s):  
Hong Yin
Keyword(s):  
Flow Field ◽  
Film Cooling ◽  
Swirling Flow ◽  
Cooling System ◽  
Leading Edge ◽  
Suction Side ◽  
Local Area ◽  
Swirl Flow ◽  
Flow Effect ◽  
Recirculation Flow

In advanced gas turbine technology, lean premixed combustion is an effective strategy to reduce peak temperature and thus, NO[Formula: see text] emissions. The swirler is adopted to establish recirculation flow zone, enhancing mixing and stabilizing the flame. Therefore, the swirling flow is dominant in the combustor flow field and has impact on the vane. This paper mainly investigates the swirling flow effect on the turbine first stage vane cooling system by conducting a group of numerical simulations. Firstly, the numerical methods of turbulence modeling using RANS and LES are compared. The computational model of one single swirl flow field is considered. Both the RANS and LES results give reasonable recirculation zone shape. When comparing the velocity distribution, the RANS results generally match the experimental data but fail to at some local area. The LES modeling gives better results and more detailed unsteady flow field. In the second step, the RANS modeling is incorporated to investigate the vane film cooling performance under the swirling inflow boundary condition. According to the numerical results, the leading edge film cooling is largely altered by the swirling flow, especially for the swirl core-leading edge aligned case. Compared to the pressure side, the suction side film cooling is more sensitive to the swirling flow. Locally, the film cooling jet is lifted and turned by the strong swirling flow.

Numerical Analysis of Flow Fields and Temperature Fields in a Regenerative Heating Furnace for Steel Pipes

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Yi Han ◽  
Feng Liu ◽  
Xin Ran
Keyword(s):  
Temperature Field ◽  
Flow Field ◽  
Flow Velocity ◽  
Gas Flow ◽  
Flow Fields ◽  
Heating Furnace ◽  
Temperature Fields ◽  
Turbulent Layer ◽  
Steel Pipes ◽  
Pipe Blanks

In the production process of large-diameter seamless steel pipes, the blank heating quality before roll piercing has an important effect on whether subsequently conforming piping is produced. Obtaining accurate pipe blank heating temperature fields is the basis for establishing and optimizing a seamless pipe heating schedule. In this paper, the thermal process in a regenerative heating furnace was studied using fluent software, and the distribution laws of the flow field in the furnace and of the temperature field around the pipe blanks were obtained and verified experimentally. The heating furnace for pipe blanks was analyzed from multiple perspectives, including overall flow field, flow fields at different cross sections, and overall temperature field. It was found that the changeover process of the regenerative heating furnace caused the temperature in the upper part of the furnace to fluctuate. Under the pipe blanks, the gas flow was relatively thin, and the flow velocity was relatively low, facilitating the formation of a viscous turbulent layer and thereby inhibiting heat exchange around the pipe blanks. The mutual interference between the gas flow from burners and the return gas from the furnace tail flue led to different flow velocity directions at different positions, and such interference was relatively evident in the middle part of the furnace. A temperature “layering” phenomenon occurred between the upper and lower parts of the pipe blanks. The study in this paper has some significant usefulness for in-depth exploration of the characteristics of regenerative heating furnaces for steel pipes.

Effects of U-Shape Inner Cooler on Flow and Solidification of Molten Steel in Slab Continuous Casting Mold

2011 ◽  
Vol 291-294 ◽  
pp. 423-427
Author(s):  
Yan Juan Jin ◽  
Xiao Chao Cui ◽  
Zhu Zhang
Keyword(s):  
Fluid Dynamics ◽  
Temperature Field ◽  
Flow Field ◽  
Continuous Casting ◽  
Molten Steel ◽  
Continuous Casting Mold ◽  
Slab Continuous Casting ◽  
Cooling Technology ◽  
Steel Flow

An inner-outer coupled cooling technology of molten steel for 1240×200mm slab continuous casting, that is to set an inner cooler—U shape pipes in the mold, is put forward in order to enhance the efficiency of transmitting heat and improve inner structure of billet. The flow status and solidification status of molten steel under coupling flow field and temperature field in inner-outer coupled cooling mold are simulated by using fluid dynamics software, and compare with those in traditional mold. It is found that setting inner cooler in the mold can make molten steel flow status even, which is favorable to floating up of the inclusion, quickening the solidification of steel liquid and improving the quality of billet.

Flow Field and Temperature Field in GaN-MOCVD Reactor Based on Computational Fluid Dynamics Modeling

2018 ◽  
Vol 35 (9) ◽  
pp. 098101
Author(s):  
Shu-Zhe Mei ◽  
Quan Wang ◽  
Mei-Lan Hao ◽  
Jian-Kai Xu ◽  
Hong-Ling Xiao ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Temperature Field ◽  
Flow Field ◽  
Dynamics Modeling ◽  
Computational Fluid Dynamics Modeling ◽  
Mocvd Reactor
Sign in / Sign up

Export Citation Format

Share Document