Superior Competitive Adsorption Capacity of Natural Bentonite in the Efficient Removal of Basic Dyes from Aqueous Solutions

2021 ◽  
Vol 6 (11) ◽  
pp. 2790-2803
Author(s):  
Abd El‐Aziz Ahmed Said ◽  
Mohamed Nady Goda
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Competitive Adsorption ◽  
Efficient Removal ◽  
Basic Dyes

Competitive adsorption of organic solvents using modified and unmodified calcium bentonite clay mineral

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Organic Solvents ◽  
Competitive Adsorption ◽  
Correlation Factor ◽  
Isotherm Model ◽  
Isotherm Models ◽  
High Concentration ◽  
Dual Purpose ◽  
Calcium Bentonite

Dodecyltrimethylammonium bromide (DTAB)–modified and unmodified calcium bentonite were both used for the competitive adsorption of aromatics (xylene, ethylbenzene and toluene) and petroleum products (gasoline, dual purpose kerosene and diesel) from their aqueous solution. Infrared spectroscopy (IR) and expansion tests (adsorption capacity and Foster swelling) measurement were performed in order to evaluate the performance of the adsorbents. The Foster swelling index and adsorption capacity of the DTAB modified calcium bentonite in the organic solvents follow the trend: xylene > ethylbenzene > toluene > gasoline > dual purpose kerosene (DPK) > diesel > water. However, the adsorption capacity of the adsorbent in diesel outweighed the adsorption capacity in DPK at high concentration of DTAB indicating that diesel has higher affinity for high DTAB concentration than DPK. The percentage removal of the solvent is directly proportional to the concentration of DTAB used in modifying the bentonite as well as the contact time between the adsorbent and the solvent, hence modified calcium bentonite adsorbed a higher percentage of organic solvents than the unmodified calcium bentonite. The adsorption characteristics of both adsorbents improved remarkably after proper agitation of the organic solvents, the unmodified calcium bentonite however adsorbed more water than the modified bentonite. Data obtained from adsorption isotherm models confirms that Freundlich adsorption isotherm model was favored more than Langmuir adsorption isotherm model with the correlation factor (R2) of the former tending more towards unity. The adsorption of ethylbenzene using DTAB modified and unmodified calcium bentonites follow a pseudo second order kinetics mechanism, suggesting that the rate determining step of adsorption involves both the adsorbent and the organic solvent.

Sorption of Bisphenol A in Aqueous Solutions on Irradiated and as-Grown Multiwalled Carbon Nanotubes

2018 ◽  
Vol 69 (5) ◽  
pp. 1233-1239
Author(s):  
Raluca Madalina Senin ◽  
Ion Ion ◽  
Ovidiu Oprea ◽  
Rusandica Stoica ◽  
Rodica Ganea ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Bisphenol A ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Multiwalled Carbon Nanotubes ◽  
Adsorption Process ◽  
Sorption Process ◽  
Multiwalled Carbon ◽  
Before And After ◽  
Kinetic Sorption

In this study, non-irradiated and weathered multiwalled carbon nanotubes (MWCNTs) obtained through irradiation, were studied as adsorbents for BPA, both nanomaterials being characterized before and after the adsorption process. The objectives of our investigation were to compare the characteristics of non-irradiated and irradiated MWCNTs, to evaluate the adsorption capacity of BPA by pristine and irradiated MWCNTs and to determine the variation of the kinetic, sorption and thermodynamic parameters during sorption process using both sorbents.

scholarly journals Molecular simulation of gases competitive adsorption in lignite and analysis of original CO desorption

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jing Zhang ◽  
Jiren Wang ◽  
Chunhua Zhang ◽  
Zongxiang Li ◽  
Jinchao Zhu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Molecular Simulation ◽  
Competitive Adsorption ◽  
Air Leakage ◽  
Adsorption Characteristics ◽  
Adsorption Sites ◽  
Simulation Based ◽  
Lignite Coal ◽  
Model C ◽  
Grand Canonical

AbstractTo study the adsorption characteristics of CO, CO2, N2, O2, and their binary-components in lignite coal, reveal the influence of CO2 or N2 injection and air leakage on the desorption of CO in goafs, a lignite model (C206H206N2O44) was established, and the supercell structure was optimized under temperatures of 288.15–318.15 K for molecular simulation. Based on molecular dynamics, the Grand Canonical Monte Carlo method was used to simulate the adsorption characteristics and the Langmuir equation was used to fit the adsorption isotherms of gases. The results show that for single-components, the order of adsorption capacity is CO2 > CO > O2 > N2. For binary-components, the competitive adsorption capacities of CO2 and CO are approximate. In the low-pressure zone, the competitive adsorption capacity of CO2 is stronger than that of CO, and the CO is stronger than N2 or O2. From the simulation, it can be seen that CO2, N2 or O2 will occupy adsorption sites, causing CO desorption. Therefore, to prevent the desorption of the original CO in the goaf, it is not suitable to use CO2 or N2 injection for fire prevention, and the air leakage at the working faces need to be controlled.

scholarly journals Enhanced Adsorption of Bisphenol A from Aqueous Solution with 2-Vinylpyridine Functionalized Magnetic Nanoparticles

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1136 ◽  
Author(s):  
Qiang Li ◽  
Fei Pan ◽  
Wentao Li ◽  
Dongya Li ◽  
Haiming Xu ◽  
...  
Keyword(s):  
Bisphenol A ◽  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Magnetic Nanoparticle ◽  
Maximum Adsorption Capacity ◽  
Salting Out ◽  
Functionalized Magnetic Nanoparticles ◽  
Ft Ir ◽  
Fe3o4 Nanospheres ◽  
Enhanced Adsorption

In this study, a novel 2-vinylpyridine functionalized magnetic nanoparticle (Mag-PVP) was successfully prepared. The prepared Mag-PVP was characterized by transmission electronic microscopy (TEM), Fourier transform infrared spectrophotometry (FT-IR), vibrating sample magnetometry (VSM) and thermogravimetric analysis (TGA), and was used for the adsorption of bisphenol A (BPA) from aqueous solutions. Mag-PVP, which is composed of Fe3O4 nanoparticles and poly divinylbenzene-2-vinylpyridine (with a thickness of 10 nm), exhibited magnetic properties (Ms = 44.6 emu/g) and thermal stability. The maximum adsorption capacity (Qm) of Mag-PVP for BPA obtained from the Langmuir isotherm was 115.87 mg/g at 20 °C, which was more than that of Fe3O4 nanospheres. In the presence of NaCl, the improved adsorption capacity of Mag-PVP was probably attributed to the screening effect of Mag-PVP surface charge and salting-out effect. In the presence of CaCl2 and humic acid (HA), the adsorption capacity of BPA decreased due to competitive adsorption. The adsorption of BPA by Mag-PVP increased slightly with the increase in pH from 3.0 to 5.0 and obtained the largest adsorption amount at pH 5.0, which was probably attributed to hydrogen bonding interactions. Moreover, in actual water, Mag-PVP still showed excellent adsorption performance in removing BPA. The high adsorption capacity and excellent reusability performance in this work indicated that Mag-PVP was an effective adsorbent for removing BPA from aqueous solutions.

scholarly journals Porous BMTTPA–CS–GO nanocomposite for the efficient removal of heavy metal ions from aqueous solutions

RSC Advances ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 3725-3731
Author(s):  
Juan Huang ◽  
Weirong Cui ◽  
Ruping Liang ◽  
Li Zhang ◽  
Jianding Qiu
Keyword(s):  
Heavy Metal ◽  
Aqueous Solutions ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Polluted Water ◽  
Efficient Removal

Novel porous BMTTPA–CS–GO nanocomposites are prepared by covalently grafting BMTTPA–CS onto GO surfaces, and used for efficient removal of heavy metal ions from polluted water.

Sign in / Sign up

Export Citation Format

Share Document