Development of an Efficient Non‐Noble Metal Based Anode Electrocatalyst to Promote Methanol Oxidation Activity in DMFC

2020 ◽  
Vol 5 (20) ◽  
pp. 6023-6034 ◽  
Author(s):  
Lubna Yaqoob ◽  
Tayyaba Noor ◽  
Naseem Iqbal ◽  
Habib Nasir ◽  
Neelam Zaman ◽  
...  
2001 ◽  
Vol 7 (S2) ◽  
pp. 1112-1113
Author(s):  
Rhonda M. Stroud ◽  
Jeffrey W. Long ◽  
Karen E. Swider-Lyons ◽  
Debra R. Rolison

To address how the chemical and structural heterogeneity of Pt50Ru50 nanoparticles affects methanol oxidation activity, we have employed an arsenal of transmission electron microscopy techniques (conventional bright field-imaging, selected area diffraction, atomic-resolution lattice imaging, electron-energy loss spectroscopy, and energy-dispersive x-ray spectroscopy) to characterize 2.5-nm particles in differing oxidation and hydration states. Our studies demonstrate that electrocatalysts containing a high fraction of Ru-rich hydrous oxide, as apposed to the anhydrous PtRu bimetallic alloy, have as much as 250x higher methanol oxidation activityThe nominally 2.5-nm Pt50Ru50 particles were studied in as-received, reduced and reoxidized forms. The reducing treatment consisted of 2 h at 100 °C in flowing 10% PL/argon mixture. For re-oxidation, the reduced particles were heated for 20 h at 100 °C in an H2O-saturated oxygen atmosphere. The particles were suspended in methanol, and pipetted onto holey-carboncoated Cu grids for TEM studies.


2021 ◽  
Author(s):  
Shuang Zhao ◽  
Hui Yang ◽  
Yaru Liu ◽  
Yaodong Xing ◽  
Guangwen Cui ◽  
...  

Rational design of non-noble metal electrocatalysts is an urgent task to lower the cost of electrocatalysts for methanol oxidation reaction (MOR). Herein, mesoporous Cu-Co3O4 electrocatalysts have been prepared by using...


2011 ◽  
Vol 13 (10) ◽  
pp. 5275-5287 ◽  
Author(s):  
Satoru Kageyama ◽  
Satoshi Seino ◽  
Takashi Nakagawa ◽  
Hiroaki Nitani ◽  
Koji Ueno ◽  
...  

2000 ◽  
Vol 6 (S2) ◽  
pp. 24-25
Author(s):  
R.M. Stroud ◽  
J.W. Long ◽  
K.E. Swider ◽  
D.R. Rolison

Direct methanol fuel cells (DMFCs) offer a simpler, safer technology for point-of-use power sources compared to other hydrogen fuel cells, by avoiding the need to store hydrogen fuel or to carry out the reformation of hydrocarbons. The direct methanol oxidation electrocatalyst of choice is a nanoscale black consisting of a 50:50 atom % mixture of Pt and Ru. It has recently become known that these presumed bimetallic alloys in fact contain an array of metal, oxide and hydrous phases, which are easily misidentified in routine x-ray diffraction measurements due to particle size-broadening and poor crystallinity. By combining transmission electron microscopy, electrochemistry and thermogravimetric studies, we demonstrate here that the route to improved catalytic activity is not by phase purification of the bimetallic alloys, but instead phase engineering of hydrous ruthenium oxide and Pt mixtures.


2011 ◽  
Vol 32 (1-2) ◽  
pp. 86-92 ◽  
Author(s):  
Jianhuang ZENG ◽  
Ting SHU ◽  
Shijun LIAO ◽  
Zhenxing LIANG

2011 ◽  
Vol 287-290 ◽  
pp. 1369-1374 ◽  
Author(s):  
Jian Feng Ju ◽  
Dong Hui Wu ◽  
Yu Jun Shi

The PtRu-SiO2-TiO2/C anode electrocatalyst ( loading 10wt% PtRu ) of direct methanol fuel cell is prepared by the surface reductive deposition method, using Vulcan XC-72 carbon black coated with nanometer SiO2-TiO2 (SiO2-TiO2/C) as the isotopic carrier. The surface characteristics of nanometer SiO2-TiO2 is studied through nitrogen adsorption, which shows that it is of porous structure together with large surface area, that is benefit to enhance the activity of SiO2-TiO2 and the dispersion of PtRu nanoparticle on the carrier of SiO2-TiO2/C. X-ray diffraction( XRD ) and transmission electron microscopy( TEM ) are used to characterize the catalyst. The PtRu nanoparticle homodisperse in SiO2-TiO2/C carrier with diameter around 2.4 nm. Cyclic voltammograms and chronoamperograms are conducted to compare the electrochemical methanol oxidation activity of the PtRu-SiO2-TiO2/C catalyst with the commercial PuRu/C catalyst ( 20 wt% of PtRu ). The results show that PtRu-SiO2-TiO2/C has higher catalytic activity and anti-poisoning ability for methanol oxidation, the addition of porous SiO2-TiO2 can replace the PtRu to some extent, comparing with the commercial PuRu/C catalyst, not only the loading of PtRu has been cut down 50%, but also the electro-oxidizing activity of methanol improved. The electro-oxidizing mechanism is basically analyzed.


Sign in / Sign up

Export Citation Format

Share Document