The research on the friction and wear properties of ionic liquid treated wood fiber filled PA6 composite

2017 ◽  
Vol 49 (10) ◽  
pp. 1039-1043
Author(s):  
Zhaoliang Zang ◽  
Bin Lin
Keyword(s):  
Ionic Liquid ◽  
Friction And Wear ◽  
Wood Fiber ◽  
Treated Wood ◽  
Wear Properties ◽  
Friction And Wear Properties

Tribological Properties of the Overbased Calcium Sulfonate Complex Greases Containing Different Lubricant Additives

2013 ◽  
Vol 645 ◽  
pp. 133-136
Author(s):  
Peng Qiao ◽  
Yan Qiu Xia ◽  
Xiang Yu Ge
Keyword(s):  
Ionic Liquid ◽  
Tribological Properties ◽  
Friction And Wear ◽  
Sliding Friction ◽  
Tribological Performance ◽  
Mining Equipment ◽  
Wear Properties ◽  
Friction Tester ◽  
Calcium Sulfonate ◽  
Friction And Wear Properties

Overbased calcium sulfonate complex greases have excellent friction and wear properties and have been widely used in metallurgy and mining equipment. The effects and tribological performance of molybdenum dialkydithiocarbamate (MoDTC) and ionic liquid 1-(2-hydroxyethyl)-3-methylimidazolium bis (trifluoromethylsulfonyl) imide ([C2OHMim][NTf2]), 1-(2-hydroxyethyl)-3-hexylimidazolium bis (trifluoromethylsulfonyl) imide ([C2OHHim][NTf2s]), added in overbased calcium sulfonate complex grease as additives were investigated by using reciprocating ball-on-disk sliding friction tester. The results showed that the two kinds of additives with a certain range of concentration could improve the tribological properties of greases.

Friction and wear properties of GLC and DLC coatings under ionic liquid lubrication

2020 ◽  
Vol 143 ◽  
pp. 106067 ◽  
Author(s):  
Mingming Yan ◽  
Xinyu Wang ◽  
Songwei Zhang ◽  
Shuaituo Zhang ◽  
Xudong Sui ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Friction And Wear ◽  
Wear Properties ◽  
Dlc Coatings ◽  
Friction And Wear Properties

The Analysis on the Tribological Properties of TPU/PVC Blends under Oil Lubrication

2013 ◽  
Vol 774-776 ◽  
pp. 94-98
Author(s):  
Dao Yuan Pan ◽  
Peng Peng Wu ◽  
Zhong Xue Gao ◽  
Yu Zeng Zhang
Keyword(s):  
Working Conditions ◽  
Friction And Wear ◽  
Oil Lubrication ◽  
Wear Properties ◽  
Operation Conditions ◽  
Hydraulic Steering ◽  
Pros And Cons ◽  
Friction And Wear Properties ◽  
Lubrication Conditions ◽  
Better Than

Based on actual working conditions and parameters of the hydraulic steering gear, the purpose is optimizing the rubber seal of steering gear by different rubbers mixing technology. Compare the five kinds of rubber with metal of the friction characteristics in dynamic fit, it can obtain a performance excellent rubber real in the specific operation conditions. And then improve the overall service life of the steering gear. It is first prepared the same hardness TPU and PVC and blends that the ratio is 3:7, 5:5and7:3 in this article. The pros and cons of the five rubbers are analyzed in friction and wear properties of the above experimental. The test curve of coefficient friction and wear with time has been done under different load at constant low speed. It determines TPU/PVC = 3:7 blends through friction and wear and wear mechanism of five rubbers with steel comparatively analyses, and the heat resistance and wear resistance of them are better than the other TPU/PVC blends and PVC under oil lubrication conditions.

Amorphous Carbon Coatings for Locally Adjusted Tribological Properties in Sheet Bulk Metal Forming

2012 ◽  
Vol 504-506 ◽  
pp. 969-974 ◽  
Author(s):  
Harald Hetzner ◽  
Stephan Tremmel ◽  
Sandro Wartzack
Keyword(s):  
Amorphous Carbon ◽  
Tribological Properties ◽  
Metal Forming ◽  
Friction And Wear ◽  
Wear Properties ◽  
Carbon Coatings ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Friction And Wear Properties ◽  
Amorphous Carbon Coatings

In sheet bulk metal forming, locally adapted friction properties of the contact tool/workpiece are an appropriate means for the targeted enhancement of the material flow, enabling an improved form filling and lowered forming forces. However, the implementation of desirable friction conditions is not trivial. And further, friction is inseparably linked to wear and damage of the contacting surfaces. This calls for a methodological approach in order to consider tribology as a whole already in the early phases of process layout, so that tribological measures which allow fulfilling the requirements concerning local friction and wear properties of the tool surfaces, can already be selected during the conceptual design of the forming tools. Thin tribological coatings are an effective way of improving the friction and wear properties of functional surfaces. Metal-modified amorphous carbon coatings, which are still rather new to the field of metal forming, allow tackling friction and wear simultaneously. Unlike many other types of amorphous carbon, they have the mechanical toughness to be used in sheet bulk metal forming, and at the same time their friction properties can be varied over wide ranges by proper choice of the deposition parameters. Based on concrete research results, the mechanical, structural and special tribological properties of tungsten-modified hydrogenated amorphous carbon coatings (a-C:H:W) are presented and discussed against the background of the tribological requirements of a typical sheet bulk metal forming process.

Sign in / Sign up

Export Citation Format

Share Document