27‐3: Improved Device Performance for Inkjet Printed OLEDs via Interfacial Mixing Control

2020 ◽  
Vol 51 (1) ◽  
pp. 395-397
Author(s):  
Heung Gyu Kim ◽  
Seung Mook Lee ◽  
Dongwoo Shin ◽  
Jaekook Ha ◽  
Changhee Lee
Keyword(s):  
Device Performance ◽  
Interfacial Mixing ◽  
Mixing Control

Particle characterization of CVD tungsten metallization for 64 MBIT DRAM

1991 ◽  
Vol 49 ◽  
pp. 896-897
Author(s):  
Marylyn Bennett-Lilley ◽  
Thomas T.H. Fu ◽  
David D. Yin ◽  
R. Allen Bowling
Keyword(s):  
Chemical Vapor ◽  
Device Performance ◽  
Particle Characterization ◽  
Particle Generation ◽  
Tungsten Hexafluoride ◽  
Homogeneous Particle ◽  
Multiple Levels ◽  
Circuit Density ◽  
Sources Of Contamination

Chemical Vapor Deposition (CVD) tungsten metallization is used to increase VLSI device performance due to its low resistivity, and improved reliability over other metallization schemes. Because of its conformal nature as a blanket film, CVD-W has been adapted to multiple levels of metal which increases circuit density. It has been used to fabricate 16 MBIT DRAM technology in a manufacturing environment, and is the metallization for 64 MBIT DRAM technology currently under development. In this work, we investigate some sources of contamination. One possible source of contamination is impurities in the feed tungsten hexafluoride (WF6) gas. Another is particle generation from the various reactor components. Another generation source is homogeneous particle generation of particles from the WF6 gas itself. The purpose of this work is to investigate and analyze CVD-W process-generated particles, and establish a particle characterization methodology.

In situ TEM measurements of the electrical properties of interface dislocations

1992 ◽  
Vol 50 (2) ◽  
pp. 1338-1339
Author(s):  
F. M. Ross ◽  
R. Hull ◽  
D. Bahnck ◽  
J. C. Bean ◽  
L. J. Peticolas ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Electronic Device ◽  
In Situ Tem ◽  
Device Performance ◽  
Misfit Dislocations ◽  
Electrical Characteristics ◽  
Strained Layer ◽  
Transmission Electron ◽  
Interfacial Dislocations

We describe an investigation of the electrical properties of interfacial dislocations in strained layer heterostructures. We have been measuring both the structural and electrical characteristics of strained layer p-n junction diodes simultaneously in a transmission electron microscope, enabling us to correlate changes in the electrical characteristics of a device with the formation of dislocations.The presence of dislocations within an electronic device is known to degrade the device performance. This degradation is of increasing significance in the design and processing of novel strained layer devices which may require layer thicknesses above the critical thickness (hc), where it is energetically favourable for the layers to relax by the formation of misfit dislocations at the strained interfaces. In order to quantify how device performance is affected when relaxation occurs we have therefore been investigating the electrical properties of dislocations at the p-n junction in Si/GeSi diodes.

Charging microscopy and cathodoluminescence imaging of semi-insulating gallium arsenide

1986 ◽  
Vol 44 ◽  
pp. 816-817
Author(s):  
T.C. Sheu ◽  
S. Myhajlenko ◽  
D. Davito ◽  
J.L. Edwards ◽  
R. Roedel ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Secondary Electron ◽  
Crystal Defects ◽  
Device Performance ◽  
Gaas Wafer ◽  
Surface Charging ◽  
Gaas Substrates ◽  
Voltage Contrast ◽  
Cathodoluminescence Imaging ◽  
Scanning Electron

Liquid encapsulated Czochralski (LEC) semi-insulating (SI) GaAs has applications in integrated optics and integrated circuits. Yield and device performance is dependent on the homogeniety of the wafers. Therefore, it is important to characterise the uniformity of the GaAs substrates. In this respect, cathodoluminescence (CL) has been used to detect the presence of crystal defects and growth striations. However, when SI GaAs is examined in a scanning electron microscope (SEM), there will be a tendency for the surface to charge up. The surface charging affects the backscattered and secondary electron (SE) yield. Local variations in the surface charge will give rise to contrast (effectively voltage contrast) in the SE image. This may be associated with non-uniformities in the spatial distribution of resistivity. Wakefield et al have made use of “charging microscopy” to reveal resistivity variations across a SI GaAs wafer. In this work we report on CL imaging, the conditions used to obtain “charged” SE images and some aspects of the contrast behaviour.

Development of liquid crystal light valves using Bi12SiO20 as the photoconductor. Part 2: Device performance

1986 ◽  
Vol 133 (1) ◽  
pp. 65
Author(s):  
W.L. Baillie ◽  
P.M. Openshaw ◽  
A.D. Hart ◽  
S.S. Makh
Keyword(s):  
Liquid Crystal ◽  
Device Performance

Air Bridge Technology: A Comparison of Novel Interconnect Materials and Integration Schemes for Beyond 45 nm

2003 ◽  
Vol 766 ◽  
Author(s):  
Kenneth Foster ◽  
Joost Waeterloos ◽  
Don Frye ◽  
Steve Froelicher ◽  
Mike Mills
Keyword(s):  
Dielectric Constants ◽  
Advanced Technology ◽  
Effective Dielectric Constant ◽  
Device Performance ◽  
Interlayer Dielectric ◽  
Integration Schemes ◽  
Stepwise Reduction ◽  
Bridge Technology ◽  
Integrated Device ◽  
Compare And Contrast

AbstractThe electronics industry, in a continual drive for improved integrated device performance, is seeking increasingly lower dielectric constants (k) of the insulators that are used as interlayer dielectric (ILD) for advanced logic interconnects. As the industry continually seeks a stepwise reduction of the “effective” dielectric constant (keff), simple extendibility, leads to the consideration of the highest performance possible, namely air bridge technology. In this paper we will discuss requirements, integration schemes and properties for a novel class of materials that has been developed as part of an advanced technology probe into air bridge architecture. We will compare and contrast these potential technology offerings with other existing dense and porous ILD integration options, and show that the choice is neither trivial nor obvious.

Application of AFP Nanoprobing Light-Induced Photovoltaic Current in the Failure Analysis

2017 ◽  
Author(s):  
C.Q. Chen ◽  
P.T. Ng ◽  
G.B. Ang ◽  
Francis Rivai ◽  
S.L. Ting ◽  
...  
Keyword(s):  
Image Analysis ◽  
Failure Analysis ◽  
Photovoltaic Effect ◽  
Electrical Characterization ◽  
Fault Isolation ◽  
Device Performance ◽  
Semiconductor Technology ◽  
Current Image ◽  
Scaling Down ◽  
Detailed Circuit

Abstract As semiconductor technology keeps scaling down, failure analysis and device characterizations become more and more challenging. Global fault isolation without detailed circuit information comprises the majority of foundry EFA cases. Certain suspected areas can be isolated, but further narrow-down of transistor and device performance is very important with regards to process monitoring and failure analysis. A nanoprobing methodology is widely applied in advanced failure analysis, especially during device level electrical characterization. It is useful to verify device performance and to prove the problematic structure electrically. But sometimes the EFA spot coverage is too big to do nanoprobing analysis. Then further narrow-down is quite critical to identify the suspected structure before nanoprobing is employed. That means there is a gap between global fault isolation and localized device analysis. Under these kinds of situation, PVC and AFP current image are offen options to identify the suspected structure, but they still have their limitation for many soft defect or marginal fails. As in this case, PVC and AFP current image failed to identify the defect in the spot range. To overcome the shortage of PVC and AFP current image analysis, laser was innovatively applied in our current image analysis in this paper. As is known to all, proper wavelength laser can induce the photovoltaic effect in the device. The photovoltaic effect induced photo current can bring with it some information of the device. If this kind of information was properly interpreted, it can give us some clue of the device performance.

Detecting the 10 Angstroms That Change MEMS Performance

2004 ◽  
Author(s):  
Erika Schutte ◽  
Jack Martin
Keyword(s):  
Thin Films ◽  
Device Performance ◽  
Processing Conditions ◽  
Packaging Process ◽  
Mems Sensor ◽  
Process Characterization ◽  
Measurement Protocol ◽  
Mems Device

Abstract An ellipsometry based measurement protocol was developed to evaluate changes to MEMS sensor surfaces which may occur during packaging using unpatterned test samples. This package-level technique has been used to measure the 0-20 Angstrom thin films that can form or deposit on die during the packaging process for a variety of packaging processing conditions. Correlations with device performance shows this to be a useful tool for packaged MEMS device and process characterization.

Sign in / Sign up

Export Citation Format

Share Document