Guidance and nonlinear control system for autonomous flight of minirotorcraft unmanned aerial vehicles

2009 ◽  
Vol 27 (3) ◽  
pp. 311-334 ◽  
Author(s):  
Farid Kendoul ◽  
Zhenyu Yu ◽  
Kenzo Nonami
Keyword(s):  
Control System ◽  
Nonlinear Control ◽  
Unmanned Aerial Vehicles ◽  
Nonlinear Control System ◽  
Autonomous Flight ◽  
Aerial Vehicles

Combined active flow and flight control systems design for morphing unmanned aerial vehicles

2019 ◽  
Vol 233 (14) ◽  
pp. 5393-5402 ◽  
Author(s):  
Öztürk Özdemir Kanat ◽  
Ertuğrul Karatay ◽  
Oğuz Köse ◽  
Tuğrul Oktay
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Unmanned Aerial Vehicle ◽  
Flight Control ◽  
Active Flow Control ◽  
Autonomous Flight ◽  
Aerial Vehicles ◽  
Aerial Vehicle ◽  
Active Flow ◽  
First Time

In this article, combined active flow control system and flight control system design for morphing unmanned aerial vehicles is applied for the first time for autonomous flight performance maximization. For this purpose, longitudinal and lateral dynamics modeling of morphing unmanned aerial vehicle having active flow control manufactured in Erciyes University, Faculty of Aeronautics and Astronautics, Model Aircraft Laboratory is considered in order to obtain simulation environments. Our produced morphing unmanned aerial vehicle is called as ZANKA-II, which has a mass of 6.5 kg, range of 30 km, endurance of 0.5 h, and ceiling altitude of 6000 m. von Karman turbulence modeling is used in order to model atmospheric turbulence during flight in both longitudinal and lateral simulation environments. A stochastic optimization method called as simultaneous perturbation stochastic approximation is also applied for the first time in order to obtain optimum dimensions of morphing parameters (i.e. extension ratios of wingspan and tail span), optimum positions of blowers, and optimum magnitudes of longitudinal and lateral controllers' gains (i.e. P, I, and D gains) while minimizing cost index capturing terms for both longitudinal and lateral autonomous flight performances and there exist lower and upper constraints on all optimization variables in the literature.

scholarly journals Virtual Electric Dipole Field Applied to Autonomous Formation Flight Control of Unmanned Aerial Vehicles

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4540
Author(s):  
Leszek Ambroziak ◽  
Maciej Ciężkowski
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Flight Control ◽  
Electric Dipole ◽  
Potential Field ◽  
Control Algorithm ◽  
Formation Flight ◽  
Potential Fields ◽  
Dipole Potential ◽  
Aerial Vehicles

The following paper presents a method for the use of a virtual electric dipole potential field to control a leader-follower formation of autonomous Unmanned Aerial Vehicles (UAVs). The proposed control algorithm uses a virtual electric dipole potential field to determine the desired heading for a UAV follower. This method’s greatest advantage is the ability to rapidly change the potential field function depending on the position of the independent leader. Another advantage is that it ensures formation flight safety regardless of the positions of the initial leader or follower. Moreover, it is also possible to generate additional potential fields which guarantee obstacle and vehicle collision avoidance. The considered control system can easily be adapted to vehicles with different dynamics without the need to retune heading control channel gains and parameters. The paper closely describes and presents in detail the synthesis of the control algorithm based on vector fields obtained using scalar virtual electric dipole potential fields. The proposed control system was tested and its operation was verified through simulations. Generated potential fields as well as leader-follower flight parameters have been presented and thoroughly discussed within the paper. The obtained research results validate the effectiveness of this formation flight control method as well as prove that the described algorithm improves flight formation organization and helps ensure collision-free conditions.

Modeling and control of a quadrotor tail-sitter unmanned aerial vehicles

2021 ◽  
pp. 095965182110504
Author(s):  
Hongbo Xin ◽  
Yujie Wang ◽  
Xianzhong Gao ◽  
Qingyang Chen ◽  
Bingjie Zhu ◽  
...  
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Unmanned Aerial Vehicle ◽  
Euler Angle ◽  
Level Flight ◽  
Aerial Vehicles ◽  
Flight Mode ◽  
Aerial Vehicle ◽  
Hover Flight ◽  
And Control

The tail-sitter unmanned aerial vehicles have the advantages of multi-rotors and fixed-wing aircrafts, such as vertical takeoff and landing, long endurance and high-speed cruise. These make the tail-sitter unmanned aerial vehicle capable for special tasks in complex environments. In this article, we present the modeling and the control system design for a quadrotor tail-sitter unmanned aerial vehicle whose main structure consists of a traditional quadrotor with four wings fixed on the four rotor arms. The key point of the control system is the transition process between hover flight mode and level flight mode. However, the normal Euler angle representation cannot tackle both of the hover and level flight modes because of the singularity when pitch angle tends to [Formula: see text]. The dual-Euler method using two Euler-angle representations in two body-fixed coordinate frames is presented to couple with this problem, which gives continuous attitude representation throughout the whole flight envelope. The control system is divided into hover and level controllers to adapt to the two different flight modes. The nonlinear dynamic inverse method is employed to realize fuselage rotation and attitude stabilization. In guidance control, the vector field method is used in level flight guidance logic, and the quadrotor guidance method is used in hover flight mode. The framework of the whole system is established by MATLAB and Simulink, and the effectiveness of the guidance and control algorithms are verified by simulation. Finally, the flight test of the prototype shows the feasibility of the whole system.

scholarly journals Design and Fabrication of Voice Controlled Unmanned Aerial Vehicle

2016 ◽  
Vol 5 (3) ◽  
pp. 205
Author(s):  
S. Sakthi Anand ◽  
R. Mathiyazaghan
Keyword(s):  
Control System ◽  
Unmanned Aerial Vehicles ◽  
Unmanned Aerial Vehicle ◽  
Voice Recognition ◽  
Search And Rescue ◽  
Voice Input ◽  
Recognition Process ◽  
Aerial Vehicles ◽  
Aerial Vehicle ◽  
The Voice

<p class="Default">Unmanned Aerial Vehicles have gained well known attention in recent years for a numerous applications such as military, civilian surveillance operations as well as search and rescue missions. The UAVs are not controlled by professional pilots and users have less aviation experience. Therefore it seems to be purposeful to simplify the process of aircraft controlling. The objective is to design, fabricate and implement an unmanned aerial vehicle which is controlled by means of voice recognition. In the proposed system, voice commands are given to the quadcopter to control it autonomously. This system is navigated by the voice input. The control system responds to the voice input by voice recognition process and corresponding algorithms make the motors to run at specified speeds which controls the direction of the quadcopter.</p>

Sign in / Sign up

Export Citation Format

Share Document