Determination of the Admittance and Effective Length of Cylindrical Antennas

Radio Science ◽  
1966 ◽  
Vol 1 (7) ◽  
pp. 835-850 ◽  
Author(s):  
R. W. P. King ◽  
E. A. Aronson ◽  
C. W. Harrison
2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Shigui Du ◽  
Huicai Gao ◽  
Yunjin Hu ◽  
Man Huang ◽  
Hua Zhao

The joint roughness coefficient (JRC) of rock joints has the characteristic of scale effect. JRC measured on small-size exposed rock joints should be evaluated by JRC scale effect in order to obtain the JRC of actual-scale rock joints, since field rock joints are hardly fully exposed or well saved. Based on the validity analysis of JRC scale effect, concepts of rate of JRC scale effect and effective length of JRC scale effect were proposed. Then, a graphic method for determination of the effective length of JRC scale effect was established. Study results show that the JRC of actual-scale rock joints can be obtained through a fractal model of JRC scale effect according to the statistically measured results of the JRC of small-size partial exposed rock joints and by the selection of fractal dimension of JRC scale effect and the determination of effective length of JRC scale effect.


Author(s):  
S. J. Lee ◽  
B. J. Gilmore

Abstract A probabilistic model and methods to determine the means and variances of the velocity and acceleration of stochastically-defined planar pin jointed kinematic chains are presented. The presented model considers the effect of tolerances on link length and radial clearance and uncertainty of pin location as a net effect on the link’s effective length. The determination of the mean values and variances of the output variables requires the calculation of sensitivities of secondary variables with respect to the random variables. It is shown that this computation is straightforward and can be accomplished by a conventional kinematic analysis package. Thus, the concepts of tolerance and clearance have been captured by the model and analysis. The only input data is the nominal linkage model and statistical information. The “effective link length” model is shown to be applicable to both analytical solution and Monte Carlo simulation. The results from both methods are compared. This paper solves the higher-order kinematics problem for the probabilistic design analysis of stochastically defined mechanisms.


1991 ◽  
Vol 113 (1) ◽  
pp. 84-90 ◽  
Author(s):  
S. J. Lee ◽  
B. J. Gilmore

A probabilistic model and methods to determine the means and variances of the velocity and acceleration within stochastically-defined planar pin jointed kinematic chains are presented. The presented model considers the effect of tolerances on link length and radial clearance and uncertainty of pin location as a net effect on the link’s effective length. The determination of the mean values and variances of the output variables requires the calculation of sensitivities of secondary variables with respect to the random variables. It is shown that this computation is straightforward and can be accomplished by a conventional kinematic analysis package. Thus, the concepts of tolerance and clearance have been captured by the model and analysis. The only input data is the nominal linkage model and statistical information. The “effective link length” model is shown to be applicable to both analytical solution and Monte Carlo simulation. The results from both methods are compared. This paper solves the higher-order kinematics problem for the probabilistic design analysis of stochastically defined mechanisms.


2012 ◽  
Vol 7 ◽  
pp. ACI.S9940 ◽  
Author(s):  
Mohamed Salim ◽  
Nahed El-Enany ◽  
Fathallah Belal ◽  
Mohamed Walash ◽  
Gabor Patonay

A novel, quick, reliable and simple capillary zone electrophoresis CZE method was developed and validated for the simultaneous determination of sitagliptin (SG) and metformin (MF) in pharmaceutical preparations. Separation was carried out in fused silica capillary (50.0 cm total length and 43.0 cm effective length, 49 μm i.d.) by applying a potential of 15 KV (positive polarity) and a running buffer containing 60 mM phosphate buffer at pH 4.0 with UV detection at 203 nm. The samples were injected hydrodynamically for 3 s at 0.5 psi and the temperature of the capillary cartridge was kept at 25 °C. Phenformin was used as internal standard (IS). The method was suitably validated with respect to specificity, linearity, limit of detection and quantitation, accuracy, precision, and robustness. The method showed good linearity in the ranges of 10-100 μg/mL and 50-500 μg/mL with limits of detection of 0.49, 2.11 μm/mL and limits of quantification of 1.48, 6.39 μg/mL for SG and MF, respectively. The proposed method was successfully applied for the analysis of the studied drugs in their synthetic mixtures and co-formulated tablets without interfering peaks due to the excipients present in the pharmaceutical tablets. The method was further extended to the in-vitro determination of the two drugs in spiked human plasma. The estimated amounts of SG/MF were almost identical with the certified values, and their percentage relative standard deviation values (% R.S.D.) were found to be ≤1.50% (n = 3). The results were compared to a reference method reported in the literature and no significant difference was found statistically.


2007 ◽  
Vol 34 (2) ◽  
pp. 253-265
Author(s):  
Serge Parent ◽  
Joseph J Pote ◽  
Kenneth W Neale

In this paper, a design procedure for cold-formed channels periodically closed on their open face and utilized as joist web members is detailed. The design method for periodically closed sections is based on the representation of the cross-sectional properties using Fourier series introduced in Timoshenko quotients for the determination of the buckling loads about each of the three member axes. Once those loads are computed, they are used in the current framework of the North American Specification for the design of cold-formed structures with appropriate effective length coefficients. The proposed design methodology is compared with test results obtained from 36 stub column samples and 21 full-scale joist specimens, also presented in this paper.Key words: cold-formed struts, periodically varying cross sections, steel joists, flexural–torsional buckling, effective length coefficients.


2014 ◽  
Vol 886 ◽  
pp. 402-407
Author(s):  
Da Tian Zhang ◽  
Dong Hua Zhou

Determining the frame column effective length is a key part of the structure stability calculation in practical engineering. This specification for design of steel structure and specification for design of concrete are given in some relevant calculation formula and forms, but these formulas and tables can only be applied to the simple situation. In the complex situation, such as the frame column axial force and height is large, the formula is not applicable, may leads to unsafe results. In this paper. the formulas are deduced by using second-order displacement method in order to solve these problems,and the chart for determining the effective length is also obtained. The chart can be used to calculate the effective length factor quickly and concisely.


Author(s):  
Sohila M Elonsy ◽  
Fawzy A El Yazbi ◽  
Rasha A Shaalan ◽  
Hytham M Ahmed ◽  
Tarek S Belal

Abstract Objective Two chromatographic methods were described for simultaneous determination of the antihypertensive drugs amlodipine besylate (AML) and bisoprolol fumarate (BIS). Methods Method I applies micellar electrokinetic capillary chromatography using a deactivated fused silica capillary (25 cm effective length × 50 μm internal diameter). The background electrolyte consisted of 0.01 M borate buffer (pH 9.2) containing 0.025 M sodium dodecyl sulphate and methanol in the ratio of 80:20 (v/v). Valsartan (VAL) was used as an internal standard. Diode array detector was set at 238, 224, and 210 nm for measuring AML, BIS, and VAL, respectively. Method II involves using ultra-performance liquid chromatography with fluorescence detection. Zorbax SB-C8 column (2.1 × 100 mm, 1.8 μm particle size) was used with isocratic elution of the mobile phase composed of 0.1% trifluoroacetic acid, acetonitrile, and methanol in the ratio of 55:35:10 (v/v) at a flow rate of 0.6 mL/min. Fluorescence detection was done using excitation wavelengths 230 and 370 nm and emission wavelengths 305 and 450 nm for BIS and AML, respectively. Validation parameters were carefully studied including linearity, ranges, precision, accuracy, robustness, detection, and quantification limits. Results Method I showed good linearity over the range 10–100 μg/mL for both dugs. Method II’s linear ranges were 0.001–0.1 and 0.02–1 µg/mL for BIS and AML, respectively. Conclusion The proposed methods were successfully validated and applied for assay of the studied drugs in their fixed-dose combination tablets. Highlights To the best of our knowledge, this study suggests the first electro-chromatographic and LC with fluorescence detection methods for simultaneous determination of amlodipine and bisoprolol.


HPB Surgery ◽  
1990 ◽  
Vol 2 (3) ◽  
pp. 159-164 ◽  
Author(s):  
D. H. Taylor ◽  
D. L. Morris ◽  
K. S. Richards

Protoscoleces of Echinococcus granulosus were cultured in vitro in 500, 250 or 100 μg/1 albendazole sulphoxide for 1, 3, 7, 10, 14d and then ‘recued’ (R) into drug-free medium for the remainder ofthe culture period. Successful minimum lengths of therapy were much longer than for praziquantel, and only at 500μg/1 was the 10dR treatment as effective as continuous therapy for 28d. Treatment with 100 μg/1 both in continuous culture and in the ‘R’ experiments was ineffective over a 35d period. The results are compared with those from similar experiments using praziquantel.


Sign in / Sign up

Export Citation Format

Share Document