Acoustic emission testing of aboveground petroleum storage tanks: Risk assessment and lessons learned

2011 ◽  
Vol 31 (2) ◽  
pp. 159-164 ◽  
Author(s):  
Martín Sánchez ◽  
Nicolas Cardenas ◽  
Veronica A. Dominguez
Keyword(s):  
Risk Assessment ◽  
Acoustic Emission ◽  
Lessons Learned ◽  
Storage Tanks ◽  
Emission Testing ◽  
Acoustic Emission Testing ◽  
Petroleum Storage

scholarly journals Acoustic Emission Testing and Ib-Value Analysis of Ultraviolet Light-Irradiated Fiber Composites

2021 ◽  
Vol 11 (14) ◽  
pp. 6550
Author(s):  
Doyun Jung ◽  
Wonjin Na
Keyword(s):  
Acoustic Emission ◽  
Irradiation Time ◽  
Tensile Load ◽  
Failure Behavior ◽  
Value Analysis ◽  
Emission Testing ◽  
Final Failure ◽  
Acoustic Emission Testing ◽  
Woven Glass Fiber ◽  
Ae Signals

The failure behavior of composites under ultraviolet (UV) irradiation was investigated by acoustic emission (AE) testing and Ib-value analysis. AE signals were acquired from woven glass fiber/epoxy specimens tested under tensile load. Cracks initiated earlier in UV-irradiated specimens, with a higher crack growth rate in comparison to the pristine specimen. In the UV-degraded specimen, a serrated fracture surface appeared due to surface hardening and damaged interfaces. All specimens displayed a linearly decreasing trend in Ib-values with an increasing irradiation time, reaching the same value at final failure even when the starting values were different.

Study of the Metal Crack Propagation by Acoustic Emission Testing

2011 ◽  
Vol 105-107 ◽  
pp. 2179-2182
Author(s):  
Wei Min Zhang ◽  
Shu Xuan Liu ◽  
Yong Qiu ◽  
Cheng Feng Chen
Keyword(s):  
Acoustic Emission ◽  
Crack Propagation ◽  
Acquisition System ◽  
Signal Acquisition ◽  
Sensor Signal ◽  
Acoustic Emission Sensor ◽  
Axial Tension ◽  
Emission Testing ◽  
Acoustic Emission Testing ◽  
Signal Operating

Crack propagation is the main reason which leads to the invalidity of the metal components. A set of detecting equipment based on the acoustic emission method was designed, and it was mainly composed of acoustic emission sensor, signal operating circuits and signal acquisition system. Specimens of 16MnR material were manufactured and the static axial tension test of them was carried on. Acoustic emission signals from the specimen were detected by acoustic emission equipment by using piezoelectric ceramic sensor. Signal datum were acquired and operated by the acquisition system, as well as the acquisition program written for it. The final results has demonstrated that acoustic emission equipment designed for the test performed well in acquiring the signals induced by the metal crack propagation.

Sign in / Sign up

Export Citation Format

Share Document