Experimental Investigation and Modeling the Compressive Behavior of NEPE Propellant under Confining Pressure

2021 ◽  
Author(s):  
Hui Li ◽  
Jin‐sheng Xu ◽  
Xiong Chen ◽  
Yu‐fei Hou ◽  
Xing‐gui Fan ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Confining Pressure ◽  
Compressive Behavior ◽  
Nepe Propellant

scholarly journals Experimental Investigation on Small-Strain Stiffness of Marine Silty Sand

2020 ◽  
Vol 8 (5) ◽  
pp. 360 ◽  
Author(s):  
Qi Wu ◽  
Qingrui Lu ◽  
Qizhou Guo ◽  
Kai Zhao ◽  
Pen Chen ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Void Ratio ◽  
Reduction Rate ◽  
Confining Pressure ◽  
Small Strain ◽  
Silty Sand ◽  
Bender Element ◽  
Small Strain Stiffness ◽  
Alternative State ◽  
State Index

The significance of small-strain stiffness (Gmax) of saturated composite soils are still of great concern in practice, due to the complex influence of fines on soil fabric. This paper presents an experimental investigation conducted through comprehensive bender element tests on Gmax of marine silty sand. Special attention is paid to the influence of initial effective confining pressure ( σ c 0 ′ ), global void ratio (e) and fines content (FC) on Gmax of a marine silty sand. The results indicate that under otherwise similar conditions, Gmax decreases with decreasing e or FC, but decreases with increasing FC. In addition, the reduction rate of Gmax with e increasing is not sensitive to σ c 0 ′ , but obviously sensitive to changes in FC. The equivalent skeleton void ratio (e*) is introduced as an alternative state index for silty sand with various FC, based on the concept of binary packing material. Remarkably, the Hardin model is modified with the new state index e*, allowing unified characterization of Gmax values for silty sand with various FC, e, and σ c 0 ′ . Independent test data for different silty sand published in the literature calibrate the applicability of this proposed model.

The Effect of Confinement Method and Specimen End Condition on Behavior of FRP-Confined Concrete under Concentric Compression

2013 ◽  
Vol 351-352 ◽  
pp. 650-653 ◽  
Author(s):  
Thomas Vincent ◽  
Togay Ozbakkloglu
Keyword(s):  
Experimental Investigation ◽  
Cross Sections ◽  
Fiber Reinforced Polymer ◽  
Confined Concrete ◽  
Fiber Reinforced ◽  
Compressive Behavior ◽  
Stress Strain ◽  
Reinforced Polymer ◽  
Concrete Cylinders ◽  
Frp Tubes

This paper presents an experimental investigation on the influence of confinement method and specimen end condition on axial compressive behavior of fiber reinforced polymer (FRP)-confined concrete. A total of 12 aramid FRP (AFRP)-confined concrete specimens with circular cross-sections were tested. Half of these specimens were manufactured as concrete-filled FRP tubes (CFFTs) and the remaining half were FRP-wrapped concrete cylinders. The effect of specimen end condition was examined on both CFFTs and FRP-wrapped specimens. This parameter was selected to study the influence of loading the FRP jacket on the axial compressive behavior. In this paper the experimentally recorded stress-strain relationships are presented graphically and key experimental outcomes discussed. The results indicate that the performance of FRP-wrapped specimens is similar to that of CFFT specimens and the influence of specimen end condition is negligible.

Sign in / Sign up

Export Citation Format

Share Document