Hybrid factors influencing wet grip and rolling resistance properties of solution styrene-butadiene rubber composites

2018 ◽  
Vol 67 (3) ◽  
pp. 340-346 ◽  
Author(s):  
Sung-Seen Choi ◽  
Hyuk-Min Kwon ◽  
Yeowool Kim ◽  
Eunah Ko ◽  
Ki-Suk Lee
Keyword(s):  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Factors Influencing ◽  
Wet Grip ◽  
Styrene Butadiene

scholarly journals Influence of Eco-Friendly Processing Aids on Silica-Based Rubber Composites

2020 ◽  
Vol 10 (20) ◽  
pp. 7244
Author(s):  
Sung Ho Song
Keyword(s):  
Mechanical Properties ◽  
Rolling Resistance ◽  
Fatigue Properties ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Dispersing Agent ◽  
Styrene Butadiene ◽  
Processing Aids

As eco-friendly “green tires” are being developed in the tire industry, conventionally used carbon black is being replaced with silica in rubber compounds. Generally, as a lubricant and dispersing agent, processing aids containing zinc ions have been employed as additives. However, as zinc is a heavy metal, alternative eco-friendly processing aids are required to satisfy worldwide environmental concerns. Furthermore, non-toxic, degradable, and renewable processing aids are required to improve the mechanical properties of the rubber composites. In this study, we evaluated the effects of diverse silica-based processing aids containing hydrocarbon, benzene, and hydroxyl functional groups on the mechanical properties of rubber composites. Among them, rubber composites that used amphiphilic terpene phenol resin (TPR) with hydrophilic silica showed compatibility with the hydrophobic rubber matrix and were revealed to improve the mechanical and fatigue properties. Furthermore, owing to the enhanced dispersion of silica in the rubber matrix, the TPR/styrene butadiene rubber composites exhibited enhanced wet grip and rolling resistance. These results indicated that TPR had multifunctional effects at low levels and has the potential for use as a processing aid in silica-based rubber composites in tire engineering applications.

scholarly journals Effects of Blend Ratio and SBR Type on Properties of Carbon Black-Filled and Silica-Filled SBR/BR Tire Tread Compounds

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Pongdhorn Sae-oui ◽  
Krisda Suchiva ◽  
Chakrit Sirisinha ◽  
Wenussarin Intiya ◽  
Pram Yodjun ◽  
...  
Keyword(s):  
Carbon Black ◽  
Abrasion Resistance ◽  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Blend Ratio ◽  
Wet Grip ◽  
Styrene Butadiene

This work aimed at investigating the effects of blend ratio between styrene butadiene rubber (SBR) and butadiene rubber (BR) and SBR type (E-SBR and S-SBR) on properties of SBR/BR tire tread compounds. Influences of these parameters on properties of the tread compounds reinforced by 80 parts per hundred rubber (phr) of carbon black (CB) and silica were also compared. Results reveal that hardness, strengths, and wet grip efficiency were impaired whereas rolling resistance was improved with increasing BR proportion. Surprisingly, the presence of BR imparted poorer abrasion resistance in most systems, except for the CB-filled E-SBR system in which an enhanced abrasion resistance was observed. Obviously, S-SBR gave superior properties (tire performance) compared to E-SBR, particularly obvious in the silica-filled system. Compared with CB, silica gave comparable strengths, better wet grip efficiency, and lower rolling resistance. Carbon black, however, offered greater abrasion resistance than silica.

Study on silica-based rubber composites with epoxidized natural rubber and solution styrene butadiene rubber

2020 ◽  
pp. 096739112097139
Author(s):  
Sung Ho Song
Keyword(s):  
Natural Rubber ◽  
Rolling Resistance ◽  
Epoxidized Natural Rubber ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Filled Rubber ◽  
Polar Functional Groups ◽  
Styrene Butadiene

Carbon black has been replaced with silica as a reinforcing filler in tire tread compounds. This change has led to lower rolling resistance and improved hysteretic losses of so-called “green tires.” However, the dispersion of silica in the rubber matrix is an important issue due to the poor compatibility of hydrophilic silica with a hydrophobic rubber matrix. Recently, some rubbers with polar functional groups that can interact with silica have been studied to improve the interaction in silica-filled rubber composites. In this work, we fabricated the silica-filled rubber composites with solution styrene butadiene rubber (SSBR) and epoxidized natural rubber (ENR) and evaluated their properties in a silica-containing rubber formulation compared to conventional SBR and NR. The silica-embedded polar rubber matrix exhibits remarkable enhancement in the modulus, tensile strength, and abrasion properties due to an efficient dispersion of the silica and improvement of interfacial interactions with the rubber matrix. The polar rubber composite exhibits an enhanced dry and wet braking and improved rolling resistance due to the improved dispersion of the silica in the rubber matrix. These results show that rubber composites prepared with polar rubbers have great potential for tire engineering applications.

CORRELATION OF FILLER NETWORKING WITH REINFORCEMENT AND DYNAMIC PROPERTIES OF SSBR/CARBON BLACK/SILICA COMPOSITES

2015 ◽  
Vol 88 (4) ◽  
pp. 676-689 ◽  
Author(s):  
Wengjiang Feng ◽  
Zhenghai Tang ◽  
Peijin Weng ◽  
Baochun Guo
Keyword(s):  
Carbon Black ◽  
Network Structure ◽  
Dynamic Properties ◽  
Rolling Resistance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Filler Network ◽  
Improved Performance ◽  
Styrene Butadiene

ABSTRACT The use of silica to partially replace carbon black is a common practice in the fabrication of “green tires.” Although some degree of consensus has been approached concerning the improved performance conferred by silica substitution, such as the improved dispersion of carbon black, a quantitative understanding of the relationship between filler networking and the performance of rubber composites has not been established. Thus, an investigation focusing on filler network structure and the correlation between the network structure and the reinforcement of rubber composites was conducted. We prepared solution-polymerized styrene–butadiene rubber (SSBR) reinforced by carbon black and carbon black/silica in different ratios. To exclude as much of the effect from changed crosslinking, and figure out how filler blending influences filler dispersion and filler network structure, the silane generally used in the tire industry was not adopted. The quantitative predictor, the mass fractal dimension df, was derived from the Kraus model and the Huber–Vilgis model. We found that when the amount of substituted silica increases, the filler cluster branching decreases, accompanied by increased reinforcement efficiency. The depressed filler networking induced by silica substitution at an appropriate proportion leads to improved dynamic properties, including lower rolling resistance and better wet skid. When the silica proportion in the filler is too high, severe filler networking is observed, resulting in decreased reinforcing efficiency and impaired dynamic properties.

Preparation and characterization of lignin-layered double hydroxide/styrene-butadiene rubber composites

2013 ◽  
Vol 130 (2) ◽  
pp. 1308-1312 ◽  
Author(s):  
Suo Xiao ◽  
Jianxiang Feng ◽  
Jin Zhu ◽  
Xi Wang ◽  
Chunwang Yi ◽  
...  
Keyword(s):  
Layered Double Hydroxide ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Double Hydroxide ◽  
Styrene Butadiene

Using heat-treated starch to modify the surface of biochar and improve the tensile properties of biochar-filled styrene–butadiene rubber composites

2018 ◽  
Vol 51 (1) ◽  
pp. 26-35
Author(s):  
Steven C Peterson ◽  
Sanghoon Kim
Keyword(s):  
Tensile Properties ◽  
Styrene Butadiene Rubber ◽  
Filler Materials ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Heat Treated ◽  
Matrix Interactions ◽  
Renewable Material ◽  
Styrene Butadiene ◽  
Properties Of Composites

Heat-treated starch (HTS) is a renewable material that can be used to modify the surface chemistry of small particles. In this work, HTS was used to coat hydrophilic biochar particles in order to make them more hydrophobic. Then, when added as filler to hydrophobic styrene–butadiene rubber (SBR), the coated biochar dispersed more easily and had enhanced filler–matrix interactions, which were reflected in the tensile properties of the final composites. Biochar particles modified with 5% (weight) HTS showed increases of 59% in the ultimate tensile strength, 49% in elongation percentage, and 79% in fracture toughness of SBR composites compared to unmodified biochar particles. This shows that HTS can be used to improve the tensile properties of composites filled with biochar and potentially other hydrophilic filler materials.

Sign in / Sign up

Export Citation Format

Share Document