Stress-strain behavior and dynamic mechanical properties of poly(1,1-dimethyl-1-sila-cis-pent-3-ene), poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) and of these polymers after crosslinking with sulfur

1995 ◽  
Vol 35 (2) ◽  
pp. 157-164 ◽  
Author(s):  
Min Wei Chen ◽  
Charles X. Liao ◽  
William P. Weber
Keyword(s):  
Mechanical Properties ◽  
Dynamic Mechanical Properties ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Strain Behavior

scholarly journals Study on Dynamic Mechanical Properties and Constitutive Model Construction of TC18 Titanium Alloy

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Changming Zhang ◽  
Anle Mu ◽  
Yun Wang ◽  
Hui Zhang
Keyword(s):  
Mechanical Properties ◽  
Titanium Alloy ◽  
Flow Stress ◽  
Yield Strength ◽  
Constitutive Model ◽  
Testing Machine ◽  
Dynamic Mechanical Properties ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Different Temperatures

In order to investigate the static and dynamic mechanical properties of TC18 titanium alloy, the quasi-static stress–strain curve of TC18 titanium alloy under room temperature was obtained by DNS 100 electronic universal testing machine (Changchun Institute of Mechanical Science Co., Ltd., Changchun, China). Meanwhile, the flow stress–strain curves under different temperatures and strain rates are analyzed by split Hopkinson pressure bar (SHPB) device with synchronous assembly system. On the basis of the two experimental data, the JC constitutive model under the combined action of high temperature and impact load is established using the linear least squares method. The results show the following: the yield strength and flow stress of TC18 titanium alloy increase slowly with the increase of the strain rate, and the strain value corresponding to the yield strength is reduced. With the increase of strain, the flow stress increases at first and then decreases at different temperatures. The strain value corresponding to the transition point rises with the temperature increase, and the corresponding stress value remains basically unchanged. With the increase of experimental temperature, the flow stress shows a downward trend, and the JC constitutive model can predict the plastic flow stress well.

Dynamic Mechanical Properties of Float Glass

2013 ◽  
Vol 631-632 ◽  
pp. 383-387
Author(s):  
Lei Li ◽  
Jian Hua Liu ◽  
Yao Feng Ji
Keyword(s):  
Mechanical Properties ◽  
Split Hopkinson Pressure Bar ◽  
Dynamic Mechanical Properties ◽  
Float Glass ◽  
Hopkinson Pressure Bar ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Split Hopkinson ◽  
Pressure Bar ◽  
Nonlinear Elastic

In order to study dynamic mechanical properties of float glass under blast and ballistic/fragmentation impacts, the curves of stress- strain are obtained in higher ranges by using the modified Split Hopkinson Pressure Bar (SHPB) techniques. Experimental results indicate that float glass is nonlinear elastic-brittle materials, and its dynamic curves of stress-strain are nonlinear and can be divided into three stages: elastic, nonlinear strengthening and stress drop. The dynamic Young’s modulus and the dynamic compressive strength of float glass increase with the increasing of strain rate. Finally, an explanation was given according to principle of energy equilibrium of Griffith.

Effect of Pre-Stress on the Dynamic Tensile Behavior of the TMJ Disc

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
J. Lomakin ◽  
P. A. Sprouse ◽  
M. S. Detamore ◽  
S. H. Gehrke
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Strain Curve ◽  
Dynamic Mechanical Properties ◽  
Polymer Materials ◽  
Stress Strain ◽  
Dynamic Mechanical ◽  
Highly Nonlinear ◽  
Nonlinear Stress ◽  
Tmj Disc

Previous dynamic analyses of the temporomandibular joint (TMJ) disc have not included a true preload, i.e., a step stress or strain beyond the initial tare load. However, due to the highly nonlinear stress-strain response of the TMJ disc, we hypothesized that the dynamic mechanical properties would greatly depend on the preload, which could then, in part, account for the large variation in the tensile stiffnesses reported for the TMJ disc in the literature. This study is the first to report the dynamic mechanical properties as a function of prestress. As hypothesized, the storage modulus (E′) of the disc varied by a factor of 25 in the mediolateral direction and a factor of 200 in the anteroposterior direction, depending on the prestress. Multiple constant strain rate sweeps were extracted and superimposed via strain-rate frequency superposition (SRFS), which demonstrated that the strain rate amplitude and strain rate were both important factors in determining the TMJ disc material properties, which is an effect not typically seen with synthetic materials. The presented analysis demonstrated, for the first time, the applicability of viscoelastic models, previously applied to synthetic polymer materials, to a complex hierarchical biomaterial such as the TMJ disc, providing a uniquely comprehensive way to capture the viscoelastic response of biological materials. Finally, we emphasize that the use of a preload, preferably which falls within the linear region of the stress-strain curve, is critical to provide reproducible results for tensile analysis of musculoskeletal tissues. Therefore, we recommend that future dynamic mechanical analyses of the TMJ disc be performed at a controlled prestress corresponding to a strain range of 5–10%.

Polyurethanes based on hydroxylated rapeseed oil: thermal and dynamic mechanical properties

2015 ◽  
Vol 37 (2) ◽  
pp. 162-167
Author(s):  
V.A. Vilensky ◽  
◽  
L.V. Kobrina ◽  
S.V. Riabov ◽  
Y.Y. Kercha ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Rapeseed Oil ◽  
Dynamic Mechanical Properties ◽  
Dynamic Mechanical
Sign in / Sign up

Export Citation Format

Share Document