Kinetics of dynamic percolation in polymer/carbon composites

2019 ◽  
Vol 60 (2) ◽  
pp. 423-433 ◽  
Author(s):  
Muhammad Azeem Arshad ◽  
AbdelKrim Maaroufi
Carbon ◽  
2004 ◽  
Vol 42 (7) ◽  
pp. 1285-1290 ◽  
Author(s):  
J.M. Rosas ◽  
J. Bedia-Matamoros ◽  
J. Rodrı́guez-Mirasol ◽  
T. Cordero

2018 ◽  
Vol 42 (7) ◽  
pp. 5109-5116 ◽  
Author(s):  
Lin Zhu ◽  
Chuanchuan Li ◽  
Wenjiao Ren ◽  
Mingyang Qin ◽  
Liqiang Xu

VN@N-doped carbon composite was fabricated as sulfur host to enhance the redox kinetics of Li–S batteries, which displayed remarkable electrochemical performances.


Carbon ◽  
1987 ◽  
Vol 25 (3) ◽  
pp. 409-415 ◽  
Author(s):  
B. Dačić ◽  
S. Marinković

2008 ◽  
Vol 255 (5) ◽  
pp. 1967-1974 ◽  
Author(s):  
Jun Li ◽  
Ruiying Luo ◽  
Yaping Chen ◽  
Qiao Xiang ◽  
Chen Lin ◽  
...  

Author(s):  
J. F. DeNatale ◽  
D. G. Howitt

The electron irradiation of silicate glasses containing metal cations produces various types of phase separation and decomposition which includes oxygen bubble formation at intermediate temperatures figure I. The kinetics of bubble formation are too rapid to be accounted for by oxygen diffusion but the behavior is consistent with a cation diffusion mechanism if the amount of oxygen in the bubble is not significantly different from that in the same volume of silicate glass. The formation of oxygen bubbles is often accompanied by precipitation of crystalline phases and/or amorphous phase decomposition in the regions between the bubbles and the detection of differences in oxygen concentration between the bubble and matrix by electron energy loss spectroscopy cannot be discerned (figure 2) even when the bubble occupies the majority of the foil depth.The oxygen bubbles are stable, even in the thin foils, months after irradiation and if van der Waals behavior of the interior gas is assumed an oxygen pressure of about 4000 atmospheres must be sustained for a 100 bubble if the surface tension with the glass matrix is to balance against it at intermediate temperatures.


Author(s):  
R. J. Lauf

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.


Sign in / Sign up

Export Citation Format

Share Document