Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament

2018 ◽  
Vol 59 (1) ◽  
pp. 120-128 ◽  
Author(s):  
Bai Huang ◽  
Shuna Meng ◽  
Hui He ◽  
Yunchao Jia ◽  
Yingbin Xu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Processing Parameters ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Investigation of Recycled Acrylonitrile Butadiene Styrene for Additive Manufacturing

2020 ◽  
pp. 130-154
Author(s):  
Shajahan Bin Maidin ◽  
Zulkeflee Abdullah ◽  
Ting Kung Hieng
Keyword(s):  
Mechanical Properties ◽  
Test Specimen ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Travel Speed ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Printing Processes ◽  
Butadiene Styrene

One of the disadvantages of fused deposition modeling (FDM) is waste produced during the printing processes. This investigation focuses on using 100% recycled Acrylonitrile Butadiene Styrene (ABS) for the FDM process. The recycling begins with re-granule the waste ABS material and produces it into a new filament. The new recycled filament was used to print the test specimen. Investigation on the mechanical properties and the surface quality of the test specimen and comparison with standard ABS specimen was done. The result shows that the recycled ABS can be produced into filament with 335°C of extrusion temperature and 1.5 mm/s travel speed of the extruder conveyor. The surface roughness of recycled specimen is 6.94% higher than the standard ABS specimen. For ultimate tensile strength, there is a small difference in X and Y orientation between the standard and the recycled ABS specimen which are 22.93% and 19.98%, respectively. However, in Z orientation, it is 52.33% lower. This investigation proves that ABS can be recycled without significantly affecting its mechanical properties.

scholarly journals Study of Different Printing Design Type Polymer Samples Prepared by Additive Manufacturing

2019 ◽  
Vol 64 (2) ◽  
pp. 255-264
Author(s):  
Lucie Zarybnicka ◽  
Karel Dvorak ◽  
Zdenka Dostalova ◽  
Hana Vojackova
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Maximum Load ◽  
3D Print ◽  
Fused Deposition ◽  
Bed Temperature ◽  
Deposition Modeling ◽  
Design Type ◽  
Butadiene Styrene

3D printing is one of the most progressive additive technologies today. It finds its application also in industry. In terms of mechanical properties, the printing design of the product is an important parameter. The presented study investigates the effects of the printing design of a thin-walled 3D polymer model on the mechanical properties of the model. The material used for printing was acrylonitrile-butadiene-styrene (ABS) and the 3D print method was Fused Deposition Modeling (FDM). ABS was tested at various die temperatures and with various printing designs at a constant 3D print speed and identical print bed temperature. We examined the effect of printing temperature and product printing design on the resulting mechanical properties. We compared theoretical and experimental results by CAE–FEM Advanced Simulation modules. Results tensile deformations at maximum load by experiment and simulations are comparable. The best results of testing the mechanical properties were found in the pattern printed at a 45° angle at temperature 285 °C.

scholarly journals FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1094 ◽  
Author(s):  
Valentina Mazzanti ◽  
Lorenzo Malagutti ◽  
Francesco Mollica
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Natural Fibers ◽  
Acrylonitrile Butadiene Styrene ◽  
Processing Parameters ◽  
Fused Deposition ◽  
Additive Formulation ◽  
Deposition Modeling ◽  
3D Printed

As biodegradable thermoplastics are more and more penetrating the market of filaments for fused deposition modeling (FDM) 3D printing, fillers in the form of natural fibers are convenient: They have the clear advantage of reducing cost, yet retaining the filament biodegradability characteristics. In plastics that are processed through standard techniques (e.g., extrusion or injection molding), natural fibers have a mild reinforcing function, improving stiffness and strength, it is thus interesting to evaluate whether the same holds true also in the case of FDM produced components. The results analyzed in this review show that the mechanical properties of the most common materials, i.e., acrylonitrile-butadiene-styrene (ABS) and PLA, do not benefit from biofillers, while other less widely used polymers, such as the polyolefins, are found to become more performant. Much research has been devoted to studying the effect of additive formulation and processing parameters on the mechanical properties of biofilled 3D printed specimens. The results look promising due to the relevant number of articles published in this field in the last few years. This notwithstanding, not all aspects have been explored and more could potentially be obtained through modifications of the usual FDM techniques and the devices that have been used so far.

Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method

2021 ◽  
pp. 089270572110530
Author(s):  
Nagarjuna Maguluri ◽  
Gamini Suresh ◽  
K Venkata Rao
Keyword(s):  
Mechanical Properties ◽  
Tensile Properties ◽  
Fused Deposition Modeling ◽  
Fracture Strain ◽  
Processing Parameters ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Nozzle Temperature ◽  
Experimental Runs ◽  
Printing Speed

Fused deposition modeling (FDM) is a fast-expanding additive manufacturing technique for fabricating various polymer components in engineering and medical applications. The mechanical properties of components printed with the FDM method are influenced by several process parameters. In the current work, the influence of nozzle temperature, infill density, and printing speed on the tensile properties of specimens printed using polylactic acid (PLA) filament was investigated. With an objective to achieve better tensile properties including elastic modulus, tensile strength, and fracture strain; Taguchi L8 array has been used for framing experimental runs, and eight experiments were conducted. The results demonstrate that the nozzle temperature significantly influences the tensile properties of the FDM printed PLA products followed by infill density. The optimum processing parameters were determined for the FDM printed PLA material at a nozzle temperature of 220°C, infill density of 100%, and printing speed of 20 mm/s.

Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modeling

2016 ◽  
Vol 11 ◽  
pp. 49-59 ◽  
Author(s):  
Jaret C. Riddick ◽  
Mulugeta A. Haile ◽  
Ray Von Wahlde ◽  
Daniel P. Cole ◽  
Oluwakayode Bamiduro ◽  
...  
Keyword(s):  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Tensile Failure ◽  
Fractographic Analysis ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Tensile Strength and Flexural Strength Testing of Acrylonitrile Butadiene Styrene (ABS) Materials for Biomimetic Robotic Applications

2014 ◽  
Vol 20 ◽  
pp. 11-21 ◽  
Author(s):  
Tran Linh Khuong ◽  
Zhao Gang ◽  
Muhammad Farid ◽  
Rao Yu ◽  
Zhuang Zhi Sun ◽  
...  
Keyword(s):  
Tensile Strength ◽  
3D Printing ◽  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Acrylonitrile Butadiene Styrene ◽  
Printing Technology ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Butadiene Styrene

Biomimetic robots borrow their structure, senses and behavior from animals, such as humans or insects, and plants. Biomimetic design is design ofa machine, a robot or a system in engineeringdomain thatmimics operational and/orbehavioral model of a biological system in nature. 3D printing technology has another name as rapid prototyping technology. Currently it is being developed fastly and widely and is applied in many fields like the jewelry, footwear, industrial design, architecture, engineering and construction, automotive, aerospace, dental and medical industry, education, geographic information system, civil engineering, guns. 3D printing technology is able to manufacture complicated, sophisticated details that the traditional processing method cannot manufacture. Therefore, 3D printing technology can be seen as an effective tool in biomimetic, which can accurately simulate most of the biological structure. Fused Deposition Modeling (FDM) is a technology of the typical rapid prototyping. The main content of the article is the focusing on tensile strength test of the ABS-Acrylonitrile Butadiene Styrene material after using Fused Deposition Modeling (FDM) technology, concretization after it’s printed by UP2! 3D printer. The article focuses on two basic features which are Tensile Strength and Determination of flexural properties.

Sign in / Sign up

Export Citation Format

Share Document