Mechanical properties, crystallization characteristics, and foaming behavior of polytetrafluoroethylene-reinforced poly(lactic acid) composites

2016 ◽  
Vol 57 (5) ◽  
pp. 570-580 ◽  
Author(s):  
An Huang ◽  
Hrishikesh Kharbas ◽  
Thomas Ellingham ◽  
Haoyang Mi ◽  
Lih-Sheng Turng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Poly Lactic Acid ◽  
Foaming Behavior

Preparation and properties of flexible poly(lactic acid) blend foams

2018 ◽  
Vol 37 (4-6) ◽  
pp. 189-205 ◽  
Author(s):  
Liu Wei ◽  
He Shicheng ◽  
Zhou Hongfu
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Constitutive Model ◽  
Rheological Behavior ◽  
Cellular Structure ◽  
High Performance ◽  
Poly Lactic Acid ◽  
Compression Property ◽  
Rigid Particles ◽  
Foaming Behavior

High-performance poly(lactic acid) (PLA) foam has been recognized as a promising material because of its biodegradability. However, low flexibility and foamability of PLAs has limited its use in different fields. In this study, a blend-toughening technology was used to toughen PLA and prepare flexible foams. The mechanical properties of PLA blends were evaluated, and the cellular structure of these foaming blends was characterized. The results show that the blending components significantly affected the overall mechanical properties and foaming behavior of PLA. The toughness of PLA was enhanced by adding poly(butylene adipate- co-terephthalate) (PBAT) and rigid particles. The rheological behavior of PLA was also affected by adding PBAT. Therefore, the cellular structure of the PLA foams was affected. A constitutive model was also used to fit the experimental results of the compression property of the PLA foam.

Conductivity and mechanical properties of carbon black-reinforced poly(lactic acid) (PLA/CB) composites

2021 ◽  
Author(s):  
Jipeng Guo ◽  
Chi-Hui Tsou ◽  
Yongqi Yu ◽  
Chin-San Wu ◽  
Xuemei Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Carbon Black ◽  
Poly Lactic Acid

scholarly journals A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 776
Author(s):  
Sixiang Zhai ◽  
Qingying Liu ◽  
Yuelong Zhao ◽  
Hui Sun ◽  
Biao Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Composite Materials ◽  
Crystallization Rate ◽  
Research Progress ◽  
Poly Lactic Acid ◽  
Green Composite ◽  
Materials Development ◽  
Research Attention ◽  
Biomass Components

With the depletion of petroleum energy, the possibility of prices of petroleum-based materials increasing, and increased environmental awareness, biodegradable materials as a kind of green alternative have attracted more and more research attention. In this context, poly (lactic acid) has shown a unique combination of properties such as nontoxicity, biodegradability, biocompatibility, and good workability. However, examples of its known drawbacks include poor tensile strength, low elongation at break, poor thermal properties, and low crystallization rate. Lignocellulosic materials such as lignin and cellulose have excellent biodegradability and mechanical properties. Compounding such biomass components with poly (lactic acid) is expected to prepare green composite materials with improved properties of poly (lactic acid). This paper is aimed at summarizing the research progress of modification of poly (lactic acid) with lignin and cellulose made in in recent years, with emphasis on effects of lignin and cellulose on mechanical properties, thermal stability and crystallinity on poly (lactic acid) composite materials. Development of poly (lactic acid) composite materials in this respect is forecasted.

scholarly journals Mechanical Properties and Bioactivity of Poly(Lactic Acid) Composites Containing Poly(Glycolic Acid) Fiber and Hydroxyapatite Particles

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 249
Author(s):  
Han-Seung Ko ◽  
Sangwoon Lee ◽  
Doyoung Lee ◽  
Jae Young Jho
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Flexural Strength ◽  
Interfacial Adhesion ◽  
Glycolic Acid ◽  
Compact Bone ◽  
Poly Lactic Acid ◽  
Coupling Reactions ◽  
The Poor ◽  
Human Compact Bone

To enhance the mechanical strength and bioactivity of poly(lactic acid) (PLA) to the level that can be used as a material for spinal implants, poly(glycolic acid) (PGA) fibers and hydroxyapatite (HA) were introduced as fillers to PLA composites. To improve the poor interface between HA and PLA, HA was grafted by PLA to form HA-g-PLA through coupling reactions, and mixed with PLA. The size of the HA particles in the PLA matrix was observed to be reduced from several micrometers to sub-micrometer by grafting PLA onto HA. The tensile and flexural strength of PLA/HA-g-PLA composites were increased compared with those of PLA/HA, apparently due to the better dispersion of HA and stronger interfacial adhesion between the HA and PLA matrix. We also examined the effects of the length and frequency of grafted PLA chains on the tensile strength of the composites. By the addition of unidirectionally aligned PGA fibers, the flexural strength of the composites was greatly improved to a level comparable with human compact bone. In the bioactivity tests, the growth of apatite on the surface was fastest and most uniform in the PLA/PGA fiber/HA-g-PLA composite.

scholarly journals Poly(Lactic Acid)–Poly(Butylene Succinate)–Sugar Beet Pulp Composites; Part I: Mechanics of Composites with Fine and Coarse Sugar Beet Pulp Particles

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2531
Author(s):  
Rodion Kopitzky
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Sugar Beet ◽  
Cell Structure ◽  
Sugar Beet Pulp ◽  
Poly Lactic Acid ◽  
Butylene Succinate ◽  
Fracture Patterns ◽  
Beet Pulp ◽  
The Impact

Sugar beet pulp (SBP) is a residue available in large quantities from the sugar industry, and can serve as a cost-effective bio-based and biodegradable filler for fully bio-based compounds based on bio-based polyesters. The heterogeneous cell structure of sugar beet suggests that the processing of SBP can affect the properties of the composite. An “Ultra-Rotor” type air turbulence mill was used to produce SBP particles of different sizes. These particles were processed in a twin-screw extruder with poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) and fillers to granules for possible marketable formulations. Different screw designs, compatibilizers and the use of glycerol as a thermoplasticization agent for SBP were also tested. The spherical, cubic, or ellipsoidal-like shaped particles of SBP are not suitable for usage as a fiber-like reinforcement. In addition, the fineness of ground SBP affects the mechanical properties because (i) a high proportion of polar surfaces leads to poor compatibility, and (ii) due to the inner structure of the particulate matter, the strength of the composite is limited to the cohesive strength of compressed sugar-cell compartments of the SBP. The compatibilization of the polymer–matrix–particle interface can be achieved by using compatibilizers of different types. Scanning electron microscopy (SEM) fracture patterns show that the compatibilization can lead to both well-bonded particles and cohesive fracture patterns in the matrix. Nevertheless, the mechanical properties are limited by the impact and elongation behavior. Therefore, the applications of SBP-based composites must be well considered.

Morphology and Mechanical Properties of Poly(Lactic Acid) and Propylene-Ethylene Copolymer Blends: Effect of Organoclay Types

2017 ◽  
Vol 737 ◽  
pp. 269-274
Author(s):  
Sirirat Wacharawichanant ◽  
Chaninthon Ounyai ◽  
Ployvaree Rassamee
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Tensile Properties ◽  
Polymer Matrix ◽  
Poly Lactic Acid ◽  
Dispersed Phase ◽  
Copolymer Blends ◽  
Morphology Analysis ◽  
Ethylene Copolymer ◽  
Morphology And Mechanical Properties

The effects of four types of organoclay on morphology and mechanical properties of poly(lactic acid) (PLA)/propylene-ethylene copolymer (PEC) blends were investigated. The ratio of PLA and PEC was 80/20 by weight and the organoclay content was 5 phr. The morphology analysis showed that the addition of all oganocaly types could improve the miscibility of PLA and PEC blends due to the decreased of the domain sizes of PEC dispersed phase in the polymer matrix. The tensile properties showed Young’s modulus of the PLA/PEC blends was improved after adding clay treated surface with 25-30 wt% trimethyl stearyl ammonium.

Sign in / Sign up

Export Citation Format

Share Document