Modification of novel bio-based resin-epoxidized soybean oil by conventional epoxy resin

2011 ◽  
Vol 51 (6) ◽  
pp. 1087-1091 ◽  
Author(s):  
A.P. Gupta ◽  
Sharif Ahmad ◽  
Anshu Dev
Keyword(s):  
Soybean Oil ◽  
Epoxy Resin ◽  
Epoxidized Soybean Oil

scholarly journals Physicomechanical Properties of Epoxyurethane Biocomposites Strengthened with Hemp Wood Core

2021 ◽  
Vol 9 (1) ◽  
pp. 9-18
Author(s):  
Tetian Samoilenko ◽  
Larysa Yashchenko ◽  
Natalia Yarova ◽  
Oleh Babich ◽  
Oleksandr Brovko
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Flexural Strength ◽  
Soybean Oil ◽  
Epoxy Resin ◽  
Physicomechanical Properties ◽  
Polymer Matrices ◽  
Epoxidized Soybean Oil ◽  
Maximum Content ◽  
Properties Of Composites

Hemp wood core (HWC) filled Si-containing epoxyurethane biocomposites, in which diane epoxy resin was replaced with epoxidized soybean oil (ESO), were obtained. It was shown that the tensile strength of ESO-containing polymer was higher, and the flexural strength was lower than those of original polymer. HWC was especially effective strengthening filler for modified epoxyurethanes, because in that case mechanical properties of composites were higher than those of unfilled polymer matrices. Particularly, flexural and tensile strength of unfilled epoxyurethane with maximum content of ESO were 8.1 and 6.8 MPa respectively, while in corresponding composite they reached 17.3 and 15.7 MPa.

scholarly journals Bio-Based Epoxy Resin from Epoxidized Soybean Oil

2019 ◽  
Author(s):  
Qiuyu Tang ◽  
Yahua Chen ◽  
Huizhi Gao ◽  
Qian Li ◽  
Zhenhao Xi ◽  
...  
Keyword(s):  
Soybean Oil ◽  
Epoxy Resin ◽  
Epoxidized Soybean Oil

Mechanical, thermal and morphological properties of epoxy resin toughened with epoxidized soybean oil

2018 ◽  
Author(s):  
M. B. Abu Bakar ◽  
M. N. Masri ◽  
M. H. Mohamad Amini ◽  
M. Z. Mohd Thirmizir ◽  
M. S. Salim
Keyword(s):  
Soybean Oil ◽  
Epoxy Resin ◽  
Epoxidized Soybean Oil ◽  
Morphological Properties

Thermal and mechanical properties of epoxy resin toughened with epoxidized soybean oil

2012 ◽  
Vol 113 (2) ◽  
pp. 939-945 ◽  
Author(s):  
Yan Chen ◽  
Liting Yang ◽  
Jiahui Wu ◽  
Lijun Ma ◽  
David E. Finlow ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Soybean Oil ◽  
Epoxy Resin ◽  
Epoxidized Soybean Oil ◽  
Thermal And Mechanical Properties

Physics-mechanical and viscoelastic properties of polymer compositions based on synthetic oligomer ED-20 and epoxidized soybean oil

2021 ◽  
Vol 43 (2) ◽  
pp. 95-102
Author(s):  
L.A. Gorbach ◽  
◽  
N.V. Babkina ◽  
O.G. Purikova ◽  
A.V. Barantsova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Soybean Oil ◽  
Epoxy Resin ◽  
Viscoelastic Properties ◽  
Relative Elongation ◽  
Crosslinking Density ◽  
Epoxidized Soybean Oil ◽  
Premature Failure ◽  
Epoxy Composition

The work was aimed at studying the effects of combining epoxidized soybean oil (ESO) with standard bisphenol type A epoxy resin (ED-20). The ED-20 / ESO ratios were 100/0, 90/10, 95/15 and 80/20 (wt%). The system was cured with amine hardener mono(cyanethyl) diethylenetriamine (MCDT), triethanolamine (TEA) and mixture thereof (TEA + MCDT) at different curing temperatures. The choice was based on the hardener’s ability to open oxirane cycles, form a spatial network and initiate several parallel reactions. The viscoelastic properties, mechanical properties (tensile strength and elongation) were studied the density of obtained ED-20 / ESO samples was determined. The results showed that the introduction of ESO into epoxy resin ED-20 was accompanied by significant changes in the curing and final properties of the samples. It was shown that the physic- mechanical properties of polymer compositions ED-20 / ESO were determined by both the ESO content and the temperature of curing Depending on the selected curing mode, the addition of 5–10 wt.% of ESO increased the tensile strength relative to the σр value of the original epoxy matrix. The values of relative elongation increased significantly at 15-20 wt.% of ESO. By the method of dynamic mechanical analysis it was shown that the increase of ESO content leads to plasticization of epoxy composition and to reduction of crosslinking density. It was determined that 5-10 wt.% was the optimal concentration of ESO, at which the epoxy composition had improved physical and mechanical properties Further increase of ESO content reduced the crosslinking density and increased the defectiveness of the epoxy polymer, which causes premature failure in weak places of the structure under load.

Sign in / Sign up

Export Citation Format

Share Document