Mechanical properties and water vapor permeability of starch/montmorillonite nanocomposites

2009 ◽  
Vol 49 (12) ◽  
pp. 2421-2429 ◽  
Author(s):  
Robert D. Maksimov ◽  
Aivars Lagzdins ◽  
Nadezda Lilichenko ◽  
Egils Plume
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Montmorillonite Nanocomposites

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

Fabrication of Composite Films Based on Chitosan and Vegetable-Tanned Collagen Fibers Crosslinked with Genipin

2021 ◽  
Vol 116 (10) ◽  
Author(s):  
Jie Liu ◽  
Yanchun Liu ◽  
Eleanor M. Brown ◽  
Zhengxin Ma ◽  
Cheng-Kung Liu
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Water Vapor ◽  
Composite Film ◽  
Composite Films ◽  
Value Added ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Leather Industry ◽  
Compact Structure

The leather industry generates considerable amounts of solid waste and raises many environmental concerns during its disposal. The presence of collagen in these wastes provides a potential protein source for the fabrication of bio-based value-added products. Herein, a novel composite film was fabricated by incorporating vegetable-tanned collagen fiber (VCF), a mechanically ground powder-like leather waste, into a chitosan matrix and crosslinked with genipin. The obtained composite film showed a compact structure and the hydrogen bonding interactions were confirmed by FTIR analysis, indicating a good compatibility between chitosan and VCF. The optical properties, water absorption capacity, thermal stability, water vapor permeability and mechanical properties of the composite films were characterized. The incorporation of VCF into chitosan led to significant decreases in opacity and solubility of the films. At the same time, the mechanical properties, water vapor permeability and thermal stability of the films were improved. The composite film exhibited antibacterial activity against food-borne pathogens. Results from this research indicated the potential of the genipin-crosslinked chitosan/VCF composites for applications in antimicrobial packaging. 

scholarly journals Elaboration and Characterization of Active Apple Starch Films Incorporated with Ellagic Acid

Coatings ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 384
Author(s):  
Juan Tirado-Gallegos ◽  
Paul Zamudio-Flores ◽  
José Ornelas-Paz ◽  
Claudio Rios-Velasco ◽  
Guadalupe Olivas Orozco ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Vapor ◽  
Antioxidant Capacity ◽  
Ellagic Acid ◽  
Uv Light ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Starch Films

Apple starch films were obtained from apples harvested at 60, 70, 80 and 90 days after full bloom (DAFB). Mechanical properties and water vapor permeability (WVP) were evaluated. The apple starch films at 70 DAFB presented higher values in the variables of tensile strength (8.12 MPa), elastic modulus (3.10 MPa) and lower values of water vapor permeability (6.77 × 10−11 g m−1 s−1 Pa−1) than apple starch films from apples harvested at 60, 80 and 90 DAFB. Therefore, these films were chosen to continue the study incorporating ellagic acid (EA). The EA was added at three concentrations [0.02% (FILM-EA0.02%), 0.05% (FILM-EA0.05%) and 0.1% (FILM-EA0.1%) w/w] and compared with the apple starch films without EA (FILM-Control). The films were characterized by their physicochemical, optical, morphological and mechanical properties. Their thermal stability and antioxidant capacity were also evaluated. The FILM-Control and FILM-EA0.02% showed a uniform surface, while FILM-EA0.05% and FILM-EA0.1% showed a rough surface and insoluble EA particles. Compared to FILM-Control, EA modified the values of tensile strength, elasticity modulus and elongation at break. The antioxidant capacity increased as EA concentration did. EA incorporation allowed obtaining films with higher antioxidant capacity, capable of blocking UV light with better mechanical properties than film without EA.

scholarly journals Effect of Chitosan Nanoparticles and Pectin Content on Mechanical Properties and Water Vapor Permeability of Banana Puree Films

2012 ◽  
Vol 78 (1) ◽  
pp. N98-N104 ◽  
Author(s):  
Milena R. Martelli ◽  
Taís T. Barros ◽  
Márcia R. de Moura ◽  
Luiz H. C. Mattoso ◽  
Odilio B. G. Assis
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Chitosan Nanoparticles ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Pectin Content

Development of Biodegradable Films Based on Durian Seed Starch

2012 ◽  
Vol 506 ◽  
pp. 311-314 ◽  
Author(s):  
W. Pimpa ◽  
C. Pimpa ◽  
P. Junsangsree
Keyword(s):  
Mechanical Properties ◽  
Water Vapor ◽  
Food Processing ◽  
Corn Starch ◽  
Water Vapor Permeability ◽  
Cassava Starch ◽  
Raw Material ◽  
Vapor Permeability ◽  
Biodegradable Films ◽  
Durian Seed

Fresh durian seed consists largely of starch and can be considered such a suitable raw material for producing biodegradable films. The aim of this work was to develop biodegradable films based on durian seed starch (DSS) and to characterize their water barrier, microscopic and mechanical properties. DSS films were prepared by casting with glycerol as plasticizer. Corn starch and cassava starch, commonly used in food processing, were chosen to prepare films and compare their properties to the DSS-based films. Using a second biopolymer, carboxymethyl cellulose (CMC), in the DSS based composite has been studied as a strategy to improve their important properties. Water vapor permeability and elongation values were improved significantly (p<0.05) when 5% (w/w DSS) CMC was incorporated. Therefore, preparing biodegradable films from DSS is a new alternative for using this raw material which is sometimes much cheaper than commercial starches

scholarly journals Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4406
Author(s):  
Anita Kwaśniewska ◽  
Michał Świetlicki ◽  
Adam Prószyński ◽  
Grzegorz Gładyszewski
Keyword(s):  
Mechanical Properties ◽  
Activated Carbon ◽  
Water Vapor ◽  
Water Solubility ◽  
Composite Films ◽  
Water Vapor Permeability ◽  
Barrier Properties ◽  
Carbon Composite ◽  
Powdered Activated Carbon ◽  
Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

Sign in / Sign up

Export Citation Format

Share Document