Compressive fatigue response and reliability analysis of thermoplastic composite with low‐velocity impact damage

2021 ◽  
Author(s):  
Jiwei Chen ◽  
Weixing Yao ◽  
Hanyu Lin
Keyword(s):  
Reliability Analysis ◽  
Impact Damage ◽  
Thermoplastic Composite ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact

Low Velocity Impact on Fiber Reinforced Geocomposites

2016 ◽  
Vol 827 ◽  
pp. 145-148 ◽  
Author(s):  
Sneha Samal ◽  
David Reichmann ◽  
Iva Petrikova ◽  
Bohdana Marvalova
Keyword(s):  
Impact Damage ◽  
Acoustic Vibration ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
Impact Behaviour ◽  
Reinforced Composite ◽  
Before And After ◽  
Two Parameters ◽  
The Impact

Low velocity impact strength of the fabric reinforced geocomposite has investigated in this article. Various fabrics such as carbon and E-glass were considered for reinforcement in geopolymer matrix. The primary two parameters such as low velocity, impact damage modes are explained on the E-glass and carbon based fabric geocomposite. The onset mode of damage to failure mode is examined through C-scan analysis. The quality of the composite is observed using c-scan with acoustic vibration mode of sensor before and after impact test. Then the effect of fabric and matrix on the impact behaviour is discussed. Residual strength of the composite is measured to determine post impact behaviour. It has been observed that resistance properties of E-glass reinforced composite is better than carbon fabric reinforced composite.

Impact Damage Research of Sandwich Composite Laminates

2013 ◽  
Vol 710 ◽  
pp. 136-141
Author(s):  
Li Jun Wei ◽  
Fang Lue Huang ◽  
Hong Peng Li
Keyword(s):  
Compressive Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Low Velocity Impact ◽  
Sandwich Composite ◽  
Low Velocity ◽  
Compression Process ◽  
Velocity Impact ◽  
Residual Compressive Strength ◽  
Core Materials

Sandwich composite laminates structure is a classic application of composite material on actual aircraft structural. Dealing with low-velocity impact damage and residual compressive strength of sandwich composite laminates, explicit finite element method of ABAQUS/Explicit software was adopted to simulate low-velocity impact and compression process. Impact response and invalidation on compression between sandwich composite laminates with different core materials and regular composite laminates were compared. The simulation results indicated that softer core materials can absorb more impact energy, reduce the structure damage and enhance the residual compressive strength after impact.

scholarly journals Mechanical Characterization and Impact Damage Assessment of Hybrid Three-Dimensional Five-Directional Composites

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1395 ◽  
Author(s):  
Liwei Wu ◽  
Wei Wang ◽  
Qian Jiang ◽  
Chunjie Xiang ◽  
Ching-Wen Lou
Keyword(s):  
Carbon Fiber ◽  
Impact Load ◽  
Hybrid Composites ◽  
Impact Damage ◽  
Three Dimensional ◽  
Low Velocity Impact ◽  
Aramid Fibers ◽  
Braided Composites ◽  
Low Velocity ◽  
Velocity Impact

The effects of braided architecture and co-braided hybrid structure on low-velocity response of carbon-aramid hybrid three-dimensional five-directional (3D5d) braided composites were experimentally investigated in this study. Low-velocity impact was conducted on two types of hybridization and one pure carbon fiber braided reinforced composites under three velocities. Damage morphologies after low-velocity impact were detected by microscopy and ultrasonic nondestructive testing. Interior damages of composites were highly dependent on yarn type and alignment. Impact damage tolerance was introduced to evaluate the ductility of hybrid composites. Maximum impact load and toughness changed with impact velocity and constituent materials of the composites. The composite with aramid fiber as axial yarn and carbon fiber as braiding yarn showed the best impact resistance due to the synergistic effect of both materials. Wavelet transform was applied in frequency and time domain analyses to reflect the failure mode and mechanism of hybrid 3D5d braided composites. Aramid fibers were used either as axial yarns or braiding yarns, aiding in the effective decrease in the level of initial damage. In particular, when used as axial yarns, aramid fibers effectively mitigate the level of damage during damage evolution.

Self-healing of low-velocity impact damage in glass fabric/epoxy composites using an epoxy–mercaptan healing agent

2010 ◽  
Vol 20 (1) ◽  
pp. 015024 ◽  
Author(s):  
Yan Chao Yuan ◽  
Yueping Ye ◽  
Min Zhi Rong ◽  
Haibin Chen ◽  
Jingshen Wu ◽  
...  
Keyword(s):  
Impact Damage ◽  
Epoxy Composites ◽  
Low Velocity Impact ◽  
Glass Fabric ◽  
Self Healing ◽  
Low Velocity ◽  
Velocity Impact ◽  
Healing Agent
Sign in / Sign up

Export Citation Format

Share Document